Installation Guide

preparing the dishwasher enclosure _5
01 PREPARING THE DISHWASHER
preparing the dishwasher
enclosure
PRODUCT DIMENSIONS
ENCLOSURE DIMENSIONS
This dishwasher is designed to be enclosed
on the top and on both sides by a standard
residential kitchen cabinet unit.
The installation enclosure must be clean and free
of any obstructions.
The enclosure must be at least 24 inches wide,
24 inches deep, and 34 1/8 inches high.
For the front door of the dishwasher to be fl ush
with the leading edge of the counter top, the
counter top must be at least 25 inches deep.
Side view
DW80K7050 Series
Side view
DW80K5050 Series
Rear view
27” (686 mm)
20 ½ ” (520 mm)
24 ⅔” (627mm)
23
7
⁄
8
” (605 mm)
33
9
/
10
” (860 mm)
20 ½ ” (520 mm)
24 ” (627 mm)
5” (128 mm)
2 ⅓” (60 mm)
The water supply
line, power cable
and drain hose
should go through
this space behind
the dishwasher.
Then, the power
cable run in
channels under
the dishwasher to
connections in the
front.
24” (610 mm)
minimum
24” (610 mm)
minimum
34 ⅛” (867 mm)
minimum
Installation_DD81-02034B-00_EN.indd Sec5:5Installation_DD81-02034B-02_EN.indd Sec5:5 /10/2016 10:56:00 AM255/08/2017 10:56:00 AM
DW80R5061 Series
DW80 50 0 SeriesR 6
¾