NETWORK CAMERA User Manual SNB-3002
Network Camera User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. ● OVERVIEW 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance with the installation instructions.
Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location.
overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near conductive material. Do not attempt to service this apparatus yourself. Do not place a glass of water on the product. Do not install near any magnetic sources. Do not block any ventilation openings.
CONTENTS OVERVIEW 10 11 INSTALLATION & CONNECTION 15 16 15 18 NETWORK CONNECTION AND SETUP 22 22 19 23 24 25 26 27 31 32 34 34 Important Safety Instructions Product Features Recomended PC Specifications Recomended SD/SDHC Memory Card Specifications What’s Included At a Glance Mounting the Lens Inserting/Removing a SD Memory Card Memory Card Information (Not Included) Connecting with other Device Connecting the Camera Directly to Local Area Networking Connecting the Camera Directly to a DHCP B
overview WEB VIEWER 35 SETUP SCREEN 46 APPENDIX 75 8_ overview 35 36 37 38 40 43 44 Connecting to the Camera Login Installing ActiveX Installing Silverlight Runtime Using the Live Screen Search and play by event Search and play by time 46 46 56 63 70 Setup Audio & Video Setup Network Setup Event Setup System Setup 75 79 80 82 83 86 Specification Product Overview Troubleshooting Open Source Announcement License GPL/LGPL Software License
PRODUCT FEATURES RECOMENDED PC SPECIFICATIONS • CPU : Intel(R) Core(TM)2 2.4 GHz or higher • Operating System : Windows XP, VISTA, 7 Mac OS • Resolution : 1280X1024 pixels or higher • RAM : 2GB or higher • Web Browser : Internet Explorer 7.0 or Higher, Firefox 3.0 or Higher, Chrome 8.0 or Higher, Safari 4.0 or Higher Neither a beta test version unlike the version released in the company website nor the developer version will be supported. It is recommended to connect to IPv6 in Windows 7.
overview RECOMENDED SD/SDHC MEMORY CARD SPECIFICATIONS • 2GB ~ 32GB • To ensure proper recording of video data, it is recommended you use a memory card that supports at least read/write speed 10Mbps and Class 6. WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package.
AT A GLANCE Front Side ● OVERVIEW SNB-30 02 Item Description Camera Holder (Mount) Holes Used when you mount the camera onto the bracket by fixing the camera holder (mount) adaptor with the bracket. b Mounting Bracket Screw Hole Used to fix the camera on a bracket or mounting bracket. The screw size : use this screw to fix the mounting bracket. 1/4" - 20UNC (20THREAD/1") L : 4.5mm±0.2mm (ISO Standard), or 0.
overview Item Description Auto Iris Lens (Optional) Installed on the lens adaptor. Auto Iris Lens Connector Used to supply power and output signal to control the iris of the lens. M Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol. Mounting Bracket is not included. For more information to use mounting bracket, refer to the product’s documentation.
Rear Side ● OVERVIEW AUDIO OUT AUDIO IN SD CARD SD SYSTEM POWER RESET VIDEO 1 2 3 4 5 6 1 : ALARM IN 4 : GND 2 : ALARM OUT 5 : RS-485+ 3 : ALARM COM 6 : RS-485- Item SD Memory Card Compartment b Audio terminal NETWORK ACT LINK GND + AC 24V DC 12V Description Compartment for the SD memory card. AUDIO OUT Terminal for audio output. AUDIO IN Terminal for audio input. ON : A memory card is inserted and operates normally.
overview Item c System, Power, SD Indicators Description POWER ON : While the power is on OFF : If the power is off Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the system. J If you reset the camera, the network settings will be adjusted so that DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer program to change the basic network settings such as IP address, Subnet mask, Gateway, etc.
installation & connection MOUNTING THE LENS Disconnect the power before proceeding. The C lens and CS lens are not included in the product package. Mounting the C lens Turn the C mount adaptor clockwise to insert it and do the same with the C lens. SNB-30 02 C Lens C Mount Adapter Mounting the CS lens Turn the optional CS lens clockwise to insert it.
installation & connection Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. SNB-30 02 Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object. INSERTING/REMOVING A SD MEMORY CARD J Disconnect the power cable from the camera before inserting the SD memory card. Inserting a SD Memory Card Loosen the screw and open the cover of the SD memory card.
Removing a SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. 1 : ALAR 2 : ALARM IN 4 : GND 3 : ALARM OUT 5 : RS-48 M COM 6 : RS-485+ 5- J Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from the slot when released. To remove the SD memory card, set to from and press [Apply ( )].
installation & connection MEMORY CARD INFORMATION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports SD/SDHC memory cards. You may, however, experience compatibility issues depending on the model and make of the memory card.
CONNECTING WITH OTHER DEVICE SD ● INSTALLATION & CONNECTION Monitor (for installation) AUDIO OUT AUDIO IN SD CARD SYSTEM POWER RESET VIDEO 1 2 3 4 5 6 1 : ALARM IN 4 : GND 2 : ALARM OUT 5 : RS-485+ 3 : ALARM COM 6 : RS-485- NETWORK ACT LINK GND + AC 24V DC 12V Power Ethernet Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera.
installation & connection Connecting to Audio Input/Output Speaker Microphone PC Microphone Network 123456 1 : ALARM 2 : ALARM IN 4 : GND 3 : ALARM OUT 5 : RS-485 COM 6 : + RS-485- Speaker Amp Amp Microphone 1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to. 2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker. 3. Check the specifications for audio input. • Audio Codec G.711 PCM.
Alarm I/O Wiring Diagram ALARM IN 1 2 ALARM COM 3 (5mA sink) ● INSTALLATION & CONNECTION ALARM OUT (30VDC 2A, 125VAC 0.5A MAX) GND 4 RS-485+ 5 RS-485- 6 Connecting to the I/O port box Connect the Alarm I/O signal to the corresponding port of the rear port box.
network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the address bar of the browser.
CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM 02 Camera DSL/Cable Modem External Remote PC DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect to the camera. 4. Move to [Setup] page. 5. Move to [Network] – [DDNS] and configure the DDNS settings. 6.
network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM INTERNET SNB-30 02 PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect to the camera. 4. Move to [Setup] page. 5.
CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. 02 Camera INTERNET SNB-30 02 Camera Broadband Router PPPoE or Cable Modem Local PC PPPoE or Cable Modem External Remote PC DDNS Server (Data Center, KOREA) Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband Router, follow the instructions below.
network connection and setup BUTTONS USED IN IP INSTALLER Item Description Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemented. c Mode Displays either or for the current network connection status. MAC(Ethernet) Address Ethernet address for the connected camera. Click the column to sort the list by Ethernet address.
Item Description URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the of the camera if DDNS registration has failed. IPv4 Scans for cameras with the IPv4 setting. IPv6 Scans for cameras with the IPv6 setting. Activated in an IPv6 compliant environment. Search Scans for cameras that are currently connected to the network. However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
network connection and setup 3. In the
pane, provide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually. M You can configure the static IP settings only if the DHCP checkbox is unchecked. If not using a Broadband Router For setting , , and , contact your network administrator. 4. In the pane, provide necessary information.If using a Broadband Router M The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router. For more information about port forwarding of the broadband router, refer to “Port Range Forward (Port Mapping) Setup”. (Page 32) If the Broadband Router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other.
network connection and setup Auto Network Setup Run to display the camera search list. At the initial startup, both [Auto Set] and [Manual Set] will be grayed out. M For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function. 1. Select a camera in the search list. Find the MAC (Ethernet) address labeled on the rear of the camera. Both the [Auto Set] and [Manual Set] buttons will be activated. 2. Click [Auto Set].
DYNAMIC IP SETUP Dynamic IP Environment Setup Checking the Dynamic IP 1. Run the IP Installer on the user’s local machine to display cameras allocated with addresses in the list. 2. Select a camera in the list, and click [Manual Set] to check the of the camera. If you uncheck , you can change IP to .
network connection and setup PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1. From the Setup menu of the Broadband Router, select - . For setting the port range forward for a third-party Broadband Router, refer to the user guide of that Broadband Router. 2.
Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera. • TCP 943 port is a port for the Silverlight policy server of a camera.
network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M Access to the camera can also be gained by typing the camera's IP address in the address bar of the Internet browser.
web viewer CONNECTING TO THE CAMERA Normally, you would ● WEB VIEWER 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100 http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111 http://[2001:230:abcd:ffff:0000 :0000:ffff:1111] - the Login dialog should appear. If the HTTP port is other than 80 1. Launch the Internet browser. 2.
web viewer To check the DDNS address If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server. If this is the case, you will not be informed of the IP address changed by DDNS. Once you register a dynamic IP-based device with the DDNS server, you can easily check the changed IP when you try to access the device.
INSTALLING ACTIVEX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. ● WEB VIEWER 1. When accessing the start screen of the monitoring page, click the yellow warning message in the top of the page. 2. Click . 3. The security warning popup appears, click [Install]. 4.
web viewer INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. 1. Click . 2. When the file download dialog pops up, click . 3. When the download is completed, click . 4. The Silverlight Runtime installation page will be displayed. to proceed with the installation.
5. When done, click . ● WEB VIEWER 6. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen. J For normal installation, set the Block Popup setting as follows: ex) Internet Explorer Tools Block Popup Turn Off Pop-up Blocker (B) However, MAC OS X users who are not connected to the Internet can use the provided installation CD to install Silverlight Runtime (Run the executable “Silverlight_xxx.
web viewer USING THE LIVE SCREEN Item b c Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the SD memory. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Alarm Output Activate the Alarm Out port. Audio Display the audio Listen and Talk toggle button on the screen. Hides the alarm indicator near the border of the viewer screen.
Item Description PTZ Digital zoom You can use the mouse wheel to activate the digital zooming. Screen Optimization, Full Screen Adjust the screen to the optimal size, and display the Full Screen icon on the Live screen. Capture Saves the snapshot as an image file in the .bmp or .jpg format. Video Format M You can select a profile type in
web viewer To toggle the audio sound 1. Click the [Audio ( )] button. The corresponding button will be displayed in the Viewer. 2. Click the button to listen to / mute the sound as you wish. This button operates as a toggle button. To toggle the microphone sound 1. Click the [Mic ( )] button. The corresponding button will be displayed in the Viewer. J “Any available audio capture device cannot be found!” message appears if there is no Microphone. 2. Click the button to start / stop talking.
To control the PTZ 1. Press the [PTZ ( )] button. M ● WEB VIEWER 2. When the PTZ button bar appears on the screen, use the direction buttons to adjust the camera angle, zoom factor or focus to your preference. For further details on PTZ use, refer to “External PTZ setup”. (page 54) SEARCH AND PLAY BY EVENT 1. Click the [Playback ( )] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [Search ( )] button.
web viewer SEARCH AND PLAY BY TIME 1. Click [Search by Time ( )]. 2. Click a desired date in the calendar. The video on the specified date will be played. 3. If the video playback is stopped, select )] to play the a time and click [Play ( video for the selected time. While the video is being played, the recording time for the current video will be shown. 4. Search for the video forward or backward, and control the play speed.
To back up the searched video 1. During playback, click [ scene to back up. Save as window appears. ] on the ● WEB VIEWER 2. Click [Save]. The screenshot will be backed up to the specified path. To play the backup video The backup video will be saved in .avi format. The backup video can be played with any media player supporting the format on your PC.
setup screen SETUP You can configure the audio & video, network, event and system settings of the camera via the network. )]. 1. In the Live screen, click [Setup ( 2. The Setup screen appears. AUDIO & VIDEO SETUP Video profile 1. From the Setup menu, select the
To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select a profile number. 3. Specify the conditions under which the codec will be applied. 4. Specify the details of the selected codec including resolution and frame rate. • Resolution : Set the video size of the MPEG-4, H.264 and MJPEG files. • Framerate : Specify the frame rate. • Compression : Specify the compression rate of the video.
setup screen What is GOP size? GOP (Group of Pictures) is a set of video frames for MPEG-4 and H.264 format compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data. P-Frame contains only the data that has changed from the preceding I-Frame. You can set between 1 and 15 for the MPEG-4 and H.
To set the privacy zone You can specify a certain area of the camera video to be protected for your privacy. 1. Set it to . 3. When done, click [Apply ( ● SETUP SCREEN 2. Specify the that will fill the privacy area. )]. 4. On the video screen, click a vertex of the selected area to display the dialog as shown. 5. Enter the name of the set privacy area and press [OK]. 6. If you want to delete an area, select that area in the list and press [Delete ( )].
setup screen Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the )> tab.
M In AWC mode, click the [AWC Set] button if you want to keep the white balance level of the current image. BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select . 2. Set to . 3. Set the levels to specify the target area. WDR Setup You can set to display a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select . 2. Set to . 3.
setup screen Exposure Setup You can adjust the exposure level of the camera. 1. Select . 2. Select each item and set it properly. • Brightness : Adjust the screen brightness. • Shutter mode : Adjust the electronic shutter of the camera. - ESC (Electronic shutter control) : Adjust the shutter speed automatically according to the ambient brightness. - Manual : Adjust the shutter speed of the camera manually. - A.
Special Setup 1. Select . Brightness (Color -> B/W) : If you set Day & night mode to , specify the level of brightness where the mode can be switched from Color to B/W. Dwell time (B/W -> Color) : If you set Day & night mode to , specify the time duration the brightness is kept in order to properly perform the mode switch from B/W to Color.
setup screen OSD Setup 1. Select . 2. Select each item and set it properly. • Camera title : Specify the camera title that will be displayed on the screen. You can enter up to 15 characters for the title. • Camera title position x, y : Specify the coordinates where the camera title is displayed. Time OSD Setup 1. Select
4. When done, click [Apply ( )]. M All these operations above mentioned will be enabled only if the network camera is properly J The baud rate may not be controlled depending on the product specifications. connected to the pan/tilt-compliant receiver. And the serial port for the pan/tilt operations should be properly specified. )]. )/( )/( )] : Change the direction of camera )] : The bigger the number is, the faster the 6. Set the zoom and focus control buttons.
setup screen NETWORK SETUP Interface 1. From the Setup menu, select the tab. 2. Click . 3. Set the and as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2. - DHCP : Specify the DNS1 and DNS2. - PPPoE : Specify the DNS1, DNS2, Name and Password. If you set it to , you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
Port 1. From the Setup menu, select the tab. 2. Click . • HTTP port : HTTP port used to access the camera via the web browser. The default is 80(TCP). • VNP port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554. • Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.
setup screen • Public DDNS : Select one of provided public DDNS servers when you use a public DDNS server. - Host name : Enter the name of the host (i.e., host name of Dyndns) that is registered with the DDNS server. - User name : Enter the user name for the DDNS service. (i.e., user ID that is registered with Dyndns) - Password : Enter the password for the DDNS service. (i.e., password that is registered with Dyndns) 5. When done, click [Apply ( )].
5. Select a and specify the . 6. Specify the product location with a description if necessary. ● SETUP SCREEN 7. Click [REGISTRATION]. The product will be added to the product list that you can check. To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set to . 2. Provide the that you registered product ID with the DDNS site. 3. Click [Apply ( )].
setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the )> tab. . 3. Select . • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted. • Allow : If selecting this, access from only those IPs that are added to the filtering will be accepted. 4. Provide the IP that you want to grant or deny access from.
Installing the certificate 1. Enter the certificate name. 2. Select the certificate file to be installed and certificate key, and click [Install ( button. )] 1. Click [Delete ( )] button. 2. To delete a public certificate, you should access the network video decoder in the mode of or . 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1.
setup screen QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the )> tab. . 3. Provide the IP address. The default prefix is 32. For DSCP, the default is set to 63. 4. Select an IP address to which you will apply QoS. Only the selected IPs can be prioritized. 5. When done, click [Apply ( )].
• Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is “admin4321”. The default password can be exposed to a hacking thread so it is recommended to change the 4. When done, click [Apply ( J )]. SNMP v3 is only able to be set when the secure connection mode is HTTPS.
setup screen • E-mail configuration - Use SSL : Specify the use of SSL. - Server address : Enter the IP address of the email server that you use for the email transfer. - Use authentication : Select whether to use authorization. - User ID : Enter the user ID for logging into the email server. - Password : Enter the user account password for logging into the email server. - Port : The default port of the email server is 25; however, you can use a different port number according to the email server settings.
To make recording on the SD memory 1. Check the and the . For a SD memory card with a large capacity, the formatting will be slowed down accordingly. If the size of data grows with time, only 1 fps can be stored even if you set the record quality to Full Frame. 3. Specify the record conditions. • Record profile : Display the number of profile to record. • Overwrite : If the SD memory is full, this will delete old data and store new data in replacement.
setup screen Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the )> tab. . 3. Specify an input device. • Type - Normal Open : It is normally open, but if it is closed, an alarm will be triggered. - Normal Close : It is normally closed, but if it is open, an alarm will be triggered. 4. Specify the . • Always : Always check if an alarm occurs. It activates in operated mode when the alarm occurs.
Motion detection 1. From the Setup menu, select the tab. 2. Click . ● SETUP SCREEN ❖ Motion detection 1. Specify the use of motion detection. 2. Select a sensitivity level of the motion detection. Higher the sensitivity is, the smaller motion is detected. 3. Use the drag-and-drop method to specify the detection area on the video. 4. Specify a detection exception area to mask. You can specify up to 4 mask areas. 5. Specify the size of an object that you want to detect. 6.
setup screen - An object hides other objects behind. - Two or more objects overlap or one object divides in multiple portions. - Too fast object (for a proper detection, one object should be found overlapping between contiguous frames). - Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp. - In severe snow, rain, wind or in dawn / dusk. - A moving object comes close to the camera.
Network disconnect You can perform the saving/relay/preset operation after receiving an event of a physically disconnected network. ● SETUP SCREEN 1. From the Setup menu, select the )> tab. . 3. Specify the use of “Network disconnect”. 4. Specify the activation time and activation condition. For more information about and , refer to “Alarm input”. (page 66) 5. When done, click [Apply ( )].
setup screen - Detection of the scene change may take some time (maximum 3 seconds) right after the change was made. - Once a scene change is detected, the network camera will resume a normal operating after a certain stability time (approx. 3 seconds) during which no detection will be performed. SYSTEM SETUP Product information 1. From the Setup menu, select the tab. 2. Click . 3. Check the camera information, or provide details according to your network environment.
4. When done, click [Apply ( J )]. If the time settings differ between camera and PC, selecting may still have a difference. So it is recommended to specify the same time settings for both camera and PC. User 1. From the Setup menu, select the )> tab. . 3. Provide the necessary user information. • Administrator Password Change : Change the password for the administrator.
setup screen Upgrade / Reboot 1. From the Setup menu, select the tab. 2. Click . 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter : Resets all settings except for the Network settings. - All : Resets all settings including the camera settings.
To save the current settings and restore the backup settings 1. Click [Backup]. The Save As dialog should appear. ● SETUP SCREEN 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”. 3. To restore the backup settings, click [Restore]. 4. Select a backup file and click [Open]. M If you perform the backup or restoration, the web browser will be closed and the camera will reboots.
setup screen Log You can check the system log or event log. 1. From the Setup menu, select the )> tab. . 3. Select a log type. • Syslog : You can check the system logs where any system changes are recorded including the time information. • Evtlog : You can check the event logs including the time information. 4. From the right log list, select an item to search for. • If you select in the top left dropdown list, all logs for the applicable log type will be displayed. 5.
appendix SPECIFICATION Items Total Pixels NTSC : 811(H) x 508(V), PAL : 795(H) x 596(V) Effective Pixels NTSC : 768(H) x 494(V), PAL : 752(H) x 582(V) Scanning System Progressive (If WDR on, Interlaced Scan) Frequency NTSC : H : 15.734KHz / V : 59.94Hz, PAL : H : 15.625KHz / V : 50Hz Horizontal Resolution Color : 600 TV lines Min. Illumination 0.00008 Lux (Sens up 512X) S / N Ratio 52dB Video Out CVBS : 1.0 Vp-p / 75Ω composite Focal Length (Zoom Ratio) - Max.
appendix Items Description Camera Title Off / On (Displayed up to 15 characters) Day & Night Color / B/W / Auto (IR Cut Filter) / External Backlight Compensation Off / BLC / WDR Wide Dynamic Range NTSC : 128X, PAL : 160X Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction Motion Adaptive 2D+3D Noise Filter (Off/Low/Middle/High/ User) Digital Image Stabilization Off / On Motion Detection Off / On (4 programmable mask zones) Privacy Masking Off / On (1
Items Description RJ-45 (10/100BASE-T) Video Compression Format H.264, MPEG-4, MJPEG Resolution NTSC : 704x480, 640x480, 352x240, 320x240 PAL : 704x576, 640x480, 352x288, 320x240 Max. Framerate NTSC : 30fps, PAL : 25fps Video Quality Adjustment H.264/MPEG-4 : Compression Level, Target Bitrate Level Control MJPEG : Quality Level Control Bitrate Control Method Network H.
appendix Items Description Memory Slot SD/SDHC Memory Slot ONVIF Conformance Yes Language English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Polish, Turkish, Rumanian, Serbian, Dutch, Croatian, Hungarian, Greek Network Supported OS : Windows XP / VISTA / 7, MAC OS Environmental Web Viewer Supported Browser : Internet Explorer 7.0 or Higher, Firefox 3.0 or Higher, Chrome 8.0 or Higher, Safari 4.
PRODUCT OVERVIEW Unit : mm (inch) ● APPENDIX XZ_U] O\U[\IP XZ]U_ O\UZ_IP ]W OYUZ]IP ^Y OYU_ZIP English _79
appendix TROUBLESHOOTING PROBLEM SOLUTION y Check to make sure that the camera’s Network settings are appropriate. I can’t access the camera from a web browser. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any problem. y If the camera is connected to a Broadband Router, verify that port forwarding is properly configured.
PROBLEM SOLUTION Cannot record into the SD memory y Check if the memory card is defective. card. Cannot format the SD memory card. y Check if the memory card is inserted in the proper direction. Operation of memory card that is formatted by other devices is not guaranteed with this camera unit y Format the memory card again in menu. y Check if the memory card is defective. English _81 ● APPENDIX A SD memory card is inserted but the product does not recognize it.
OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD license as follows. Component Name License License URL lighttpd 1.4.25 librtp 1.20 net-snmp-5.4 BSD 2.0 BSD 1.0 BSD http://www.opensource.org/licenses/bsd-license.html http://www.net-snmp.org/about/license.html lighttpd is a secure, fast, compliant, and very flexible webserver that has been optimized for high-performance environments.
LICENSE Various copyrights apply to this package, listed in various separate parts below. Please make sure that you read all the parts. NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Part 1: CMU/UCD copyright notice: (BSD like) Part 3: Cambridge Broadband Ltd.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of Apple Inc. (“Apple”) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
GPL/LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
9. The Free Software Foundation may publish revised and/ or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price.
the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force.
doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product.
10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations.
If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, nonfree programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”.
by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all.
OpenSSL LICENSE Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com www.samsungipolis.com SAMSUNG TECHWIN EUROPE LTD.
