DIGITAL VIDEO RECORDER DVR COMBO User’s Manual CLASS A (For Business) To use this product safely, have to read “Important Safety Introductions”, and then be well aware of the contents.
DIGITAL VIDEO RECORDER Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
Contents iii iv ~ v 1 1-1 1-2 1-3 1-7 1-8 1-9 2 2-1 2-2 2-3 2-4 3 3-1 3-3 4 4-1 4-6 4-7 4-10 4-14 4-15 4-17 Important Safety Instructions Contents I. Summary 1. Introduction 2. Features 3. Name and Function of Each Part 4. Introduction to the Remote Control 5. Checking the Package Contents 6. Attaching/Deta ching HDD II. Connection with Other Devices 1. Connection to External Devices 2. Connection with Multiplexer 3. System Connection for Alarm Recording 4. Connection with PC for Use III.
I.
DIGITAL VIDEO RECORDER 1 Introduction DVR COMBO is DVR system using both hard disk drive and VCR tape simultaneously. Record TV reception into hard disk drive while also recording only desired program to VCR tape. Recorded VCR tape can be viewed with residential VCR. DVR COMBO can play while recording sound and image simultaneously. The system and camera can be monitored and controlled from a remote PC. Together with Samsung Multiplexer, the system can backup only desired image per each channel.
DIGITAL VIDEO RECORDER 3 Name and Function of Each Part Front View No POWER REC ALARM 1 No Name Hard Drive Rack 1 2 HDD LED 4 POWER POWER LED ALARM LAN STATUS LED 6 CHECK ARCHIVE 7 REC REC LOCK 8 RECORD REC LOCK VCR 9 1-3 3 4 5 REC LOCK VCR SEARCH VCR Displays a list of recorded data and allows you to easily search through the recorded data. MENU Displays the menu items. Use this also to exit the submenu and return to the menu at the next highest level.
P 0 W E R DIGITAL VIDEO RECORDER Back View P 0 W E R IN OUT 1 No 2 3 4 6 Name 1 POWER 2 AC IN 3 FAN 4 MODE 7 8 9 10 11 Function Power On/Off switch. The inlet for connecting the power cord. NTSC (AC 110 ~ 240V, 60 Hz) PAL (AC 220V, 50Hz) No Name 9 Audio In/Out Dip switches for setting the system ID, serial communication, and termination.
DIGITAL VIDEO RECORDER 4 Introduction to the Remote Control 5 Checking the Package Contents When purchasing product, first remove packing and put it on a flat floor or at a place to use it. Then, ensure all following contents are included: Numeric keys Adjusts the VCR's playback screen. Plays the tape at slow speed. Press and hold the SLOW - button to gradually decrease the playback speed. Use to check the video p 5-13 tape backup. Takes you to DVR INPUT for p 4-7 selecting a DVR input signal.
DIGITAL VIDEO RECORDER 6 Attaching/Detaching HDD Mounting HDD H.D.D. POWER REC ALARM LAN REC LOCK VCR H.D.D. SEAR CHECK ARCHIVE Lift up POWER REC ALARM LAN REC LOCK VCR SEA CHECK ARCHIVE 1. First, open the hard drive rack cover Lift up 2. Remove the hard drive rack from the 5. Lift up the rack's front handle and push 6. Lock the hard drive rack with the the rack into the main unit. Once the key, and then turn on the power.
II.
DIGITAL VIDEO RECORDER 1 Connection to External Devices 2 Connection with Multiplexer (e.g.
DIGITAL VIDEO RECORDER 3 System Connection for Alarm Recording 1 2 3 4 5 6 7 8 9 1 2 3 4 5 4 Connection with PC for Use Connection with RS-232C A. Communication Method ● Data Code: ASCII Code ● Protocol: 8 bit Data, 1 Stop bit, None Parity ● Transmission speed: 4800, 9600, 19200, 38400, 115200 bps B.
DIGITAL VIDEO RECORDER Connection with RS-485 D. Code value by key If you control cameras, remote control is allowed through connection with RS-485 (up to Function Byte 1 Byte 2 Byte 3 RECORD 0xA0 Src.Addr Dest.Addr. 0x1A REC LOCK 0xA0 Src.Addr Dest.Addr. 0x1A 1.2km). Byte 4 Byte 6, 7, 8 Byte 9 Response (Byte 5) 0x0B 0xFF Check Sum Byte 5 0x0A 0xFF Check Sum Byte 5 Byte 5 [SET COMMAND] A.
III.
DIGITAL VIDEO RECORDER 1 Booting the System Power On There is a power switch on the upper right hand side behind the system. Pull the power POWER switch up to boot the system. Then, the POWER LED ( ) on front of the system is turned on, a blue screen with the following message will appear and the system is booted. LOAD CONFIGURATION... Recognizing incoming video signal The SCR-3000N/SSC-Dual system only recognizes NTSC signal inputs only when booting.
DIGITAL VIDEO RECORDER 2 Basic Screen Viewing Viewing Full Screen Here comes the description of all the icons and status in the screen. 2003-06-25 04:30:00 ❿ X2 2003-06-24 00:23:44 If system is in the recording state Live Screen state. icon will blink.
DIGITAL VIDEO RECORDER Viewing Screen during recording Live Screen Viewing The normal recording screen looks like this. The normal Live screen looks like this. 2003-06-25 04:30:00 2003-06-25 04:30:00 If system is in the recording state icon will blink. However, it does not blink in the Live Screen state. If the system is executing the recording function, Indicates whether a HDD is installed or whether the hard drive rack is locked.
DIGITAL VIDEO RECORDER Playback screen Viewing The normal Playback screen looks like this. ❿ 2003-06-24 00:23:44 The upper pointer shows the relative location of the recorded data being stored inside the hard disk and the lower pointer shows the relative location of the data currently being played back. ❿ If the system is in the playback mode, ❿ icon appears. And if the system is in the pause state, it changes to this icon ❙❙.
IV.
DIGITAL VIDEO RECORDER 1 Menu View Entering the DVR MAIN MENU Move to Parent Menu or Menu End MENU Press the MENU ( MENU ) button. Then the following screen should appear. Press the MENU( ) button to move to the parent menu from the lower mode or end the menu. MAIN MENU(DVR) CLOCK/DISPLAY MODE SETUP RECORD MODE SETUP ALARM RECORD SETUP TIMER RECORD SETUP SYSTEM SETUP COMMUNICATION SETUP MOVE=[ /❷] SELECT=[ ] EXIT=[MENU] Note - Make sure that the VCR LED is off before pressing the MENU button.
DIGITAL VIDEO RECORDER Example of menu setting (in case of changing time) ① Press the MENU button and then press the ENTER( ➃ Similarly, press the UP( ) or DOWN(❷) button so current minute is displayed. Then if pressing the LEFT(➛ ) or RIGHT(❿) button, the cursor is changed so hour or ) button when the cursor points out the CLOCK/DISPLAY MODE SETUP. Then following screen appears. second is changed.
DIGITAL VIDEO RECORDER 2 Setting of Date, Time and Screen Each menu item ① CLOCK/DISPLAY MODE SETUP ② RECORD MODE SETUP CLOCK/DISPLAY MODE SETUP RECORD MODE SETUP DATE TIME DATE DISPLAY TYPE DATE & TIME DISPLAY DATE & TIME POSITION STATUS DISPLAY STATUS POSITION 2003-06-01 SUN 12:00:00 YYYY-MM-DD ON RIGHT ON LEFT DVR INPUT AUDIO RECORD PICTURE QUALITY PICTURE RATE DISK END MODE DISK END BUZZER RECORD TIME MARK TIME MARK POSITION MOVE=[ /❷/➛/❿] SELECT=[ ] EXIT=[MENU] The following illustrates the
DIGITAL VIDEO RECORDER 3 Record Setup The following illustrates the intial setting of the RECORD MODE SETUP menu. ➄ DISK END MODE ● ● RECORD MODE SETUP DVR INPUT AUDIO RECORD PICTURE QUALITY PICTURE RATE DISK END MODE DISK END BUZZER RECORD TIME MARK TIME MARK POSITION MOVE=[ /❷/➛/❿] SELECT=[ VIDEO-IN ON HIGH 30.00FPS OVERWRITE ON ON RIGHT ] EXIT=[MENU] If you select STOP, recording will stop when you consume the full HDD space.
DIGITAL VIDEO RECORDER 4 Alarm Record Setup The following illustrates the intial setting of the ALARM RECORD SETUP menu. Note The following table shows how long it would take to fill up an 80GB HDD for each field rate. (Recording time for each field rate may slightly vary depending on the type of input video singal.
DIGITAL VIDEO RECORDER ➄ PRE ALARM TIME LIMIT ⑧ MOTION DETECTION The pre-alarm recording is an important function which enables you to find out about the situation immediately before a motion is detected in the input video or before alarm occurs. Set how much video data you want to record before the motion is detected or alarm is triggered. About 2 seconds to 10 seconds of video data are stored in the system’s SDRAM at all times.
DIGITAL VIDEO RECORDER 5 Reservation Timer Setup AREA=2 LEVEL=OFF [SIZE][MOVE] The following illustrates the intial setting of the TIMER RECORD SETUP menu. TIMER RECORD SETUP TIMER DAY START OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-- AREA 2 3) SIZE Set the size of the area currently selected.
DIGITAL VIDEO RECORDER 6 System Setup The following illustrates the intial setting of the SYSTEM SETUP menu. ➅ LANGUAGE SCR-3000N/SSC-Dual models only supports English. SCR-3000P models however supports SYSTEM SETUP German, French, Spanish, and Italian in addition to English.
DIGITAL VIDEO RECORDER 7 Communication Setup The following illustrates the intial setting of the COMMUNICATION SETUP menu. COMMUNICATION SETUP BAUD RATE NETWORK ACCESS IP ADDRESS GATEWAY SUBNET MASK NETWORK USER ID NETWORK USER PWD PAN/TILT TYPE 115,200 ON 0. 0. 0. 0 0. 0. 0. 0 0. 0. 0. 0 **** **** SCC-421 MOVE=[ /❷/➛/❿] SELECT=[ ] EXIT=[MENU] ① BAUD RATE Sets data transmission rate in RS-232C communication.
DIGITAL VIDEO RECORDER 1 VCR Menus Menu Items Entering the VCR MAIN MENU VCR Press the VCR ( ) button once. Then the VCR LED will light up. Now press the MENU MENU ( ) button. Then the following screen should appear.
DIGITAL VIDEO RECORDER 2 MANUAL ARCHIVE The following illustration shows the initial settings of the MANUAL ARCHIVE menu. Use the LEFT( ➛ ), RIGHT( ❿ ), UP( ) and DOWN( ❷ ) buttons to select the event you want to back up. A highlighted cursor should appear over the selected item. Press the ENTER button ( ) to accept the choice. The selected event will be indicated by "[O]". Repeat this procedure for each event you want to back up, and then press the RECORD ( ) button to start the backup.
DIGITAL VIDEO RECORDER (2) FROM ALARM EVENT LIST (3) FROM MOTION EVENT LIST FROM ALARM EVENT LIST allows you to back up the video and audio data that has been recorded on the hard drive at the time of an event, which is triggered by alarm input or motion detection, onto a video tape. The following illustration shows the FROM ALARM EVENT LIST screen in detail. The EVENT (ALARM), DATE and TIME indicate when the event was recorded on the hard drive.
DIGITAL VIDEO RECORDER (4) TIME RANGE (5) DIRECT ARCHIVE From the MANUAL ARCHIVE menu, select "TIME RANGE" and the following screen appears. In the TIME RANGE ARCHIVE screen, you can set the start and end times of a particular section of the video and audio that you want to back up from the hard drive. TIME RANGE ARCHIVE SELECT EVENT DIRECT ARCHIVE allows you to back up the desired scenes to a video tape regardless of EVENT RECORD. First locate the desired scene.
DIGITAL VIDEO RECORDER 3 TIMER ARCHIVE The following illustration shows the initial settings of the TIMER ARCHIVE menu. TIMER ARCHIVE Start Time TIMER ARCHIVE TIMER ARCHIVE SELECT EVENT DAY FROM TO SAMPLING RATE TIMER ARCHIVEE End Time OFF RECORD [X] ALARM [X] MOTION [X] SUN 12:00:00 12:00:00 1/1 Current Time MOVE=[ /❷/➛/❿] SELECT=[ RECORD EVENT ] EXIT=[MENU] Date being archived The TIMER ARCHIVE time is a future time, rather than the current time.
DIGITAL VIDEO RECORDER 4 ARCHIVE SETUP The following illustration shows the initial settings of the ARCHIVE SETUP menu. Set the tape length for accurate calculation of remaining tape time and precise control.
DIGITAL VIDEO RECORDER 5 ARCHIVE CHECK The ARCHIVE CHECK function allows you to check whether the images played back on the DVR and transferred to the VCR are recorded correctly. The DVR plays back the signals to be Archived for 5 seconds and send them to the VCR and the VCR records them. After 5 seconds, the DVR stops playback and the VCR stops recording at the same time. The VCR plays back 5 seconds of the most recently recorded data.
VI.
DIGITAL VIDEO RECORDER 1 Basic Record Basic Record ② RECORD STOP Press the STOP( ) button to stop recording. Then, the light will go off in the RECORD ① CURRENT IMAGE RECORD REC REC Press the RECORD( RECORD( REC ) button to record current image. If doing so, the light of the ) button turns on and record starts while following message appears on ( ) button and recording will stop with the following message on the bottom of the screen. the screen.
DIGITAL VIDEO RECORDER 2 3 Record Lock Alarm Record Record Lock Record in Alarm Occurrence REC LOCK Press the REC LOCK ( ) button during recording to lock the recording. Then, the REC There is an alarm input terminal (ALARM IN) on the external I/O port at the back panel of REC LOCK LOCK ( ) button will light up. At this time, pressing the STOP ( ) button will not stop the recording. An icon appears on the top left of the screen when in the Recording Lock the DVR COMBO system.
DIGITAL VIDEO RECORDER 4 Reservation Record Reservation Record Setup You can enter the day, time, and field rate for the timer recording in the TIMER RECORD SETUP menu so that the recording will be made on the set day for the set amount of time. Reservation Record Cancel If the system is not in the timer recording mode, in order to cancel the timer recording, set the TIMER row of the line you want to cancel to OFF in one of the timer recording list set in the TIMER RECORD SETUP menu.
DIGITAL VIDEO RECORDER 1 Search Menus Returning to the Upper Menu or Exit the Current Menu Entering the DVR SEARCH MENU To search the recorded data, press the SEARCH ( SEARCH SEARCH Press the SEARCH ( ) button to exit the current menu level or to return to the upper menu. ) button. Then the following screen should appear.
DIGITAL VIDEO RECORDER 2 Retrieval by Date and Time 3 Recorded Data List View DATE & TIME SEARCH DATE&TIME 2003-07-10 [SEARCH START] MOVE=[ /❷/➛/❿] SELECT=[ 13:37:48 ] EXIT=[SEARCH] RECORD EVENT SEARCH ID EVENT DATE 01 RECORD START 2003-07-13 02 RECORD START 2003-07-12 03 RECORD START 2003-07-12 04 RECORD START 2003-07-11 05 RECORD START 2003-07-11 06 RECORD START 2003-07-10 07 RECORD START 2003-07-10 MOVE=[ /❷/➛/❿] SELECT=[ Enter the date and time you want to search, place the cursor at SEARCH ST
DIGITAL VIDEO RECORDER 4 Alarm Record Retrieval Searching Motion Detection Recordings ALARM EVENT SEARCH [01/03] ID EVENT DATE TIME 01 ALARM START 2003-07-13 17:25:52 02 ALARM START 2003-07-12 06:37:38 03 ALARM START 2003-07-11 11:54:34 MOTION EVENT SEARCH [01/03] ID EVENT DATE TIME 01 MOTION START 2003-07-13 22:42:16 02 MOTION START 2003-07-12 14:24:45 03 MOTION START 2003-05-11 06:13:52 MOVE=[ /❷/➛/❿] SELECT=[ MOVE=[ /❷/➛/❿] SELECT=[ ] EXIT=[SEARCH] Among the data on the HDD, the ones that were r
DIGITAL VIDEO RECORDER 6 7 PB CHANNEL SETUP SYSTEM INDICATION The following screen appears when you select SYSTEM INDICATION.
DIGITAL VIDEO RECORDER (2) SYSTEM INFORMATION 1) HDD SYSTEM This shows the status of the hard drive. Messages used to indicate hard drive status and their mean- The following illustration shows the initial settings of the SYSTEM INFORMATION menu. ings are as follows: - OK : Normal SYSTEM INFORMATION HDD1 CAPACITY(GB) 80.00 OVERWRITE(#) 00000 VERSION SCR3000 V1.00 MAC ADDRESS 00-00-F0-XX-XX-XX - HDD NOT IN : The hard drive rack is empty or the hard drive rack lock is unlocked.
DIGITAL VIDEO RECORDER 8 Basic Playback To immediately play back the data recorded on the HDD, press the PLAY/STILL(❿II) button. The following screen will appear and the beginning of the recorded data will be played back in turn. Press PLAY/STILL (❿II) button during playback. The following screen will appear and the system will pause temporarily. Use the RIGHT (❿) or LEFT (➛ ) button to view a frame at a time in forward or backward direction.
DIGITAL VIDEO RECORDER 9 VCR Playback Take following steps to play recorded videotape. Insert the videotape into deck. Turn VCR LED by pressing VCR button ( ) once. Then press PLAY/STILL(❿II) button. VCR Note - You can play video whether the system is in live screen mode or recording mode. - Pressing the PLAY/STILL(❿II) button will not start playing while the menu is opened. First escape from the menu before playing video. Press STOP ( ) button to stop play.
DIGITAL VIDEO RECORDER 10 Searching the Backed-up Data (VISS) The VISS function allows you to quickly and easily search the data backed up on to a video tape. 11 Playing Back a Section Repeatedly The REPEAT function allows you to repeatedly play back a certain section during DVR or VCR playback. The REPEAT function can be operated from the remote control only. The VISS function can be operated from the remote control only.
VIII.
DIGITAL VIDEO RECORDER 1 2 Product Standards Appearance Drawing Rated Voltage NTSC (AC 110 ~ 240V, 60 Hz), PAL (AC 220V, 50Hz) Power Consumption 34W HDD Removable HDD 80GB BACKUP VCR VIDEO TAPE Video Input Composite Video, BNC Jack - 1CH (1.0 Vp-p, 75Ω) S-VHS VIDEO Video Output Composite Video, BNC Jack - 1CH (1.
Appendix 9
DIGITAL VIDEO RECORDER 1 Check Points before Call Service Center If the system malfunctions, please check the following instruction before you call the service center or the shop where you bought the system. Trouble Check Points • Unable to supply power. • The POWER LED in front of the system remains off and the system is not running – Check the power cable connection behind the system, power supply, and power switch. • After power supply, the screen is all black.
DIGITAL VIDEO RECORDER 2 Q&A Question 9-3 Answer • Does recording continues after power cut during recording. – Without power supply, the system can't perform recording. But if the system was recording before power cut, it will resume recording upon power supply. • What would become of the system if disconnected with the input image signal during recording? – Without connection with the input image signal, the system can't keep recording.
