Owner's Manual

52 English
Troubleshooting
Troubleshooting
Problem Action
Vibrates excessively
or makes noise.
Make sure the washing machine is set on a level oor. If the
oor is not level, use the levelling feet to adjust the washing
machine.
Make sure the washing machine is not contacting any other
object.
Make sure the laundry load is balanced.
Make sure the laundry is spread evenly in the washing
machine. Spread out the laundry evenly and start again.
Make sure the space around the washing machine is free of
objects.
Humming is produced normally during operation.
Objects such as coins can cause noise. Remove these objects
from the washing machine after washing is complete.
Stops.
Plug the power cord into a live electrical outlet.
Check the fuse or reset the circuit breaker.
Close the door, and press or tap Start/Pause to start the
washing machine. For your safety, the washing machine will
not spin unless the door is closed.
Before the washing machine starts to ll, it will make a series
of clicking noises to check the door lock and does a quick
drain.
There may be a pause or soak period in the cycle. Wait briey
and the washing machine may start.
Make sure the inlet hose screens at the taps are not clogged.
Periodically clean the screens.
This problem occurs temporarily due to low voltages, and will
be solved when power recovers.
WA7700M_DC68-03774D-00_EN.indd 52 12/29/2016 2:07:30 PM