Washer User manual WA50R5400A* Untitled-1 1 6/20/2019 2:24:49 PM
Contents Safety information 4 Contents What you need to know about the safety instructions Important safety symbols Important safety precautions CALIFORNIA PROPOSITION 65 WARNING Critical installation warnings Installation cautions Critical usage warnings Usage cautions Critical cleaning warnings 4 4 5 6 6 7 8 9 12 Installation 13 Unpacking your washer What’s included Installation requirements Step-by-step installation 13 14 16 19 Before you start 25 Initial settings Laundry guidelines Detergent
44 Self Clean Cleaning the exterior Cleaning the interior Care for an extended period of non-use Cleaning the mesh filter Cleaning the detergent drawer 44 45 45 45 46 47 Troubleshooting 49 Checkpoints Information codes 49 54 Specifications 58 Fabric care chart Helping the environment Declaration of conformity Specification sheet 58 59 60 60 English 3 Untitled-1 3 6/20/2019 2:24:49 PM Contents Maintenance
Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use, and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. What you need to know about the safety instructions Safety information Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using this appliance. 3. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 4. Before the appliance is removed from service or discarded, remove the lid of the washing or drying compartment. 5.
Safety information CALIFORNIA PROPOSITION 65 WARNING WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Safety information Critical installation warnings WARNING Plug the power cord into an AC 120 V / 60 Hz/wall socket rated at 15 amps or higher. Use the socket for this appliance only. In addition, do not use an extension cord. • • • Sharing a wall socket with other appliances, using a power strip, or extending the power cord may result in electric shock or fire.
Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to direct sunlight or water (rain drops). Do not install this appliance in a location where gas may leak. • This may result in electric shock or fire. • This may result in electric shock or fire. Do not pull or excessively bend the power cord. Do not twist or tie the power cord.
Safety information Critical usage warnings WARNING If the appliance is flooded, cut the power immediately and contact your nearest Samsung service center. Safety information If the appliance emits a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact your nearest Samsung service center. • Failing to do so may result in electric shock or fire. In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate the area immediately.
Do not let children or infirm persons use this washer unsupervised. • Failing to do so may result in electric shock, burns, or injury. Do not insert your hand or a metal object under the washer while it is operating. • This may result in injury. Do not attempt to repair, disassemble, or modify the appliance yourself. • Do not use any fuse (such as copper, steel wire, etc.) other than a standard fuse. If you need to repair or reinstall the appliance, contact your nearest Samsung service center.
Safety information After a water supply failure or when reconnecting the water supply hose, open the faucet slowly. Open the faucet slowly after a long period of non-use. • The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage. Safety information If a drain error occurs during an operation, check if there is a draining problem.
• This may result in burns or injury. Do not operate the washer if the detergent dispenser is removed. • This may result in electric shock or injury due to water leakage. Do not insert your hand into the detergent dispenser after opening it. • This may result in injury as your hand may be caught. • This can cause abnormal vibrations that can damage the washer, and, in the case of pets, cause severe injury or death. Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
Safety information • If it accumulates inside the washer, it may result in water leakage. Do not wash throw rugs or doormats in the washer. • If you wash throw rugs or doormats, the sand will accumulate inside the washer. It may result in error such as no draining. Safety information Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use a strong acid cleaning agent. Do not use benzene, paint thinner, or alcohol to clean the appliance.
Installation Follow these instructions carefully to ensure proper installation of your washer and to prevent accidents when using it. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve, heater and pump. Unpacking your washer Unpack your washer and inspect it for shipping damage.
Installation What’s included Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact the Samsung customer care center at 1-800-SAMSUNG (1-800-726-7864) or your retailer.
Parts supplied Hose guide User manual Cable tie Water intake cap Parts not supplied Installation Water hoses Tools needed for installation Wrench Phillips screwdriver Level Adjustable pliers Measuring tape NOTE • • If you lose an accessory and want to purchase a replacement, contact the Samsung customer care center at 1-800-SAMSUNG (1-800-726-7864). The design of the parts and accessories may differ from the pictures above.
Installation Installation requirements Electrical supply and grounding • • AC 120 V / 60 Hz / 15 AMP fuse or circuit breaker is required. Use an individual branch circuit. Connect only the washer to the circuit. To ensure proper grounding, the washer comes with a power cord featuring a three-prong grounding plug for use in a properly installed and grounded outlet. Check with a qualified electrician or service person if you are not sure about the grounding. Installation Do not modify the provided plug.
Drain Samsung recommends a standpipe 39 in. (990 mm) high. The drain hose must be connected through the hose clip to the standpipe, and the standpipe must fully cover the drain hose. Flooring For best performance, the washer must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not provide good resistance to vibrations and may cause the washer to move slightly during the spin cycle.
Installation Clearance requirement This clearance requirement is applicable for washers only. NOTE • • For the dryer's clearance requirement, see the dryer’s user manual. If the washer and dryer have different clearance requirements, use the one with the larger value. Alcove or closet installations Minimum clearance for stable operation: Installation Sides Top Rear Front 1 in. / 25 mm 21 in. / 533 mm 5.9 in. / 150 mm 1 in.
Step-by-step installation STEP 1 Select a location Location requirements: • • • • • A solid, level surface without carpeting or flooring that may obstruct ventilation No direct sunlight Adequate room for ventilation and wiring Ambient temperature always higher than the freezing point (32 °F / 0 °C) Away from heat sources STEP 2 Connect the water hose • • B • A • Make sure to use new water hoses and that rubber gaskets (B) are inside the couplings (A) at both ends of the hoses.
Installation 1. Attach the water hoses to the hot and cold water taps, and then hand tighten the water hose fittings until they are tight. Then, use pliers to tighten the fittings by an additional two-thirds of a turn. To avoid damaging the fittings, do not overtighten them. 2. Pull the water hoses to check if they are firmly connected. Installation 3. Put the other ends of the hoses into a bucket, and then open the water taps for 10 - 15 seconds to remove impurities. When done, close the taps. 4.
5. Open the water taps, and check for leaks. To a Laundry Tub or Drain Pipe 1. Check the height (A) of your drain system and make sure the minimum and maximum heights shown below are met. Minimum 39 in. (99 cm) Maximum 96 in. (245 cm) NOTE • • • Make sure to measure the height from the floor where the washer is placed. Draining efficiency may be reduced if the drain system is at the maximum height. To prevent the washer from siphoning water, do not use a drain system below the minimum height.
Installation 3. Route the drain hose to the drain system. CAUTION A * • • (*): Min. 6 in. (152 mm), Max. 8 in. (203 mm) If using a standpipe, make sure the standpipe and drain hose connection is not airtight. If using a standpipe, make sure the drain hose is inserted at least 6 in. (152 mm) but no more than 8 in. (203 mm) into the standpipe. Installation 4. Secure the drain hose with cable ties. Over the edge of a wash basin A The drain hose must be placed no lower than 24 in.
4. If the washer is not level, turn the appropriate leveling feet clockwise (B) to lower the washer, or counterclockwise (C) to raise the washer so that it is level. NOTE • • B You can also level the washer by lining a level up with the seam that runs between the top of the washer and the body of the washer and checking if the washer is level on all 4 sides. See the diagram above, left. After you have checked all 4 sides and leveled the washer, perform Step 5 above.
Installation STEP 5 Power on Plug the power cord into an AC 120 V / 60 Hz / 15 AMP approved electrical outlet protected by a 15-amp fuse or circuit breaker. Then, press Power to turn on the washer. STEP 6 Run a test cycle Run a test cycle as follows to check if your washer is properly installed. 1. Load about 6 lb. of laundry into the tub. 2. Press Power to turn on your washer. 3. Turn the Cycle Selector to RINSE+SPIN. 4. Press and hold Start/Pause (Hold to Start) to start the test cycle. Installation 5.
Before you start Initial settings Run calibration (recommended) Calibration ensures accurate weight detection by the washer. Make sure the tub is empty before running calibration. 1. Press Power to turn on the washer. 2. Press and hold Temp. and Delay End simultaneously for 3 seconds. 3. Press and hold Start/Pause (Hold to Start) to start calibration. - The tub rotates clockwise or counterclockwise for approximately 2 minutes. 4.
Before you start STEP 3 Use a laundry net • • • Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres may break through and tear other laundry items. Cashmilon, large volume items, and lightweight clothes (lace-decorated clothes, lingerie, nylon stockings, and synthetic fabrics) may float during washing and not wash properly. Use the laundry net or wash them separately. Do not wash the laundry net by itself without other laundry.
STEP 4 Prewash (if necessary) • • • To remove stains and dirt on collars, sleeves, hems, and pockets, apply detergent lightly, let sit for a minute, and then brush off carefully. Use powder or liquid detergents. Do not use soap. Soap can remain on the tub after washing. To prewash white socks, sleeves, and collars apply a little detergent, and then brush carefully. CAUTION Make sure the laundry is inserted completely.
Before you start STEP 6 Add the correct detergent type The type of detergent you use - general purpose, specifically for woolens, etc. - depends on the type of fabric (cotton, synthetic, delicate items, wool), color, wash temperature, and degree of soiling. Regardless of the specific type of detergent you use, always use “low suds” HE laundry detergent which is designed for automatic washers.
Detergent drawer guidelines The washer provides a two-compartment dispenser for detergent and fabric softener. The bleach compartment is located on the left side of the tub. A B B. Detergent compartment: Apply a recommended amount of liquid detergent into the compartment. To use a powdered detergent, remove the liquid detergent container. The washer does not dispense the powdered detergent from the liquid detergent container. C. Bleach compartment: Add bleach as instructed by the manufacturer.
Before you start To add washing agents to the detergent drawer 1. Open the lid. 2. Slide open the detergent drawer. 3. Add liquid laundry detergent to the liquid detergent container in the main wash compartment. CAUTION • Make sure the liquid detergent container is inserted in the main wash compartment. NOTE • Before you start • Do not add powdered laundry detergent or other powdered laundry agents to the liquid laundry container. To use powdered detergents, see To use powdered detergent on page 31. 4.
To use powdered detergent First, remove the provided liquid detergent container from the detergent compartment. Then, add powdered detergent to the detergent compartment according to the detergent manufacturer’s instructions. CAUTION Do not add powdered detergent to the liquid detergent container. To use the bleach compartment CAUTION Do not add undiluted liquid chlorine bleach directly to the load or to the tub. This may cause fabric damage.
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the Safety information before operating this appliance. Control panel 02 07 10 08 11 09 12 13 01 03 04 05 14 06 Operations 01 Cycle Selector Turn the dial to select a cycle. (For more information about wash cycles, see page 38.) 02 Display The display shows current cycle information and estimated time remaining, or an information code if the washer needs to be checked.
Press to change the spinning speed for the current cycle. • 05 Spin • • • • High (Level 5): Extends the spinning process to effectively remove moisture from the load. This level uses a stronger spinning process to remove moisture, so it is not suitable for wrinkle-free or non-iron fabrics, or overloads. (Level 4): Underwear, t-shirts, jeans, and sturdy cottons. (Level 3): Jeans, wrinkle-free or wash-and wear items, and synthetics. (Level 2): Delicate items that require a lower spinning speed.
Operations 14 Start/Pause (Hold to Start) Press and hold to start operation or press to stop operation temporarily. Icon description • Garment+ Lid Lock • • • • • SELF CLEAN reminder • This icon indicates you can add or take out items after a cycle has started. To add or take out items, press Start/Pause (Hold to Start) to pause the cycle, and then open the lid. To resume the cycle, close the lid, and then press and hold Start/Pause (Hold to Start).
Simple steps to start 2 1 5 4 3 1. Press Power to turn on the washer. 2. Turn the Cycle Selector to select a cycle. 3. Change the cycle settings (Temp., Rinse, Spin, and Soil) as necessary. 4. Select desired options as necessary. 5. Press and hold Start/Pause (Hold to Start). To change the cycle during operation Operations 1. Press Start/Pause (Hold to Start) to stop operation. 2. Select a different cycle, and repeat steps 2-3 above if necessary. 3.
Operations Cycle overview NOTE The washer detects the weight of the items and automatically adjusts the optimal water level, washing time, rinse counts, and spin counts. (This may not be applicable on some cycles.) Cycle Description • For cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the number of rinses are automatically adjusted according to the load. HEAVY DUTY • For sturdy, colorfast fabrics, heavily soiled items. WHITES • For white items.
Cycle Description RINSE+SPIN • • For loads that need rinsing and spinning only. You can also select this cycle for additional rinsing and spinning after running other cycles. SPIN ONLY • • For loads that needs spinning only. You can also select this cycle for additional spinning after running other cycles. • Cleans the drum by removing dirt and bacteria from the drum. Perform once every 20 washes. Make sure the drum is empty.
Operations Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting Temp. Rinse Spin Soil : factory setting 5: Hot (Level 5) 5: 5 times (Level 5) 5: High (Level 5) 5: Heavy (Level 5) : can be selected 4: (Level 4) 4: (Level 4) 4: (Level 4) 4: (Level 4) 3: (Level 3) 3: (Level 3) 3: (Level 3) 3: (Level 3) 2: (Level 2) 2: (Level 2) 2: (Level 2) 2: (Level 2) 1: Cold (Level 1) 1: 1 time (Level 1) 1: No Spin (Level 1) 1: Light (Level 1) Cycle Temp.
Cycle Spin Soil 5 4 3 2 1 5 4 3 2 1 NORMAL – HEAVY DUTY WHITES DELICATES – – – – – – PERM PRESS BEDDING/WATERPROOF – QUICK WASH ACTIVE WEAR – – – DARKS RINSE+SPIN – – – – – SPIN ONLY – – – – – SELF CL
Operations Special features Active Waterjet (for prewash) You can use the Active Waterjet function to hand-wash your items before you put them in the washer. 1. Press Power to turn on your washer. 2. Open the lid. 3. Press Active Waterjet to supply water. 4. Hand-wash the items. 5. When done, press Active Waterjet again to stop the water. NOTE If you want to hand-wash while the washer is operating, press Start/Pause (Hold to Start) to stop operation, and then follow steps 1-4 above.
• Make sure the lid is closed tightly before you start a load of laundry. Delay End You can set the washer to finish your wash automatically at a later time by choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle. Then, change the cycle settings if necessary. 2. Press Delay End repeatedly until a desired end time is set. 3. Press and hold Start/Pause (Hold to Start). 4.
Operations ATC (Auto Temperature Control) ATC enables the washer to control water temperatures in each washing cycle using the internal thermistor. It is designed to maintain certain washing temperatures for best results. NOTE • • If you select NORMAL or HEAVY DUTY, you may notice the washer supplying cold water. This is normal because the machine is designed to reduce power consumption.
Deactivating the Child Lock function Press and hold both Temp. and Rinse simultaneously for approximately 3 seconds. • • When you deactivate the Child Lock function, the Child Lock indicator is turned off. The Child Lock function prevents children or the infirm from accidently operating the washer and injuring themselves. WARNING If a child enters the washer, the child may become trapped and suffocate.
Maintenance Keep the washer clean for best performance and to lengthen its life cycle. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve, heater, and pump. Self Clean Certain usage and environmental conditions may result in some residue build-up or odor in the washer tub.
Cleaning the exterior 1. Turn off the water taps after finishing the day’s washing. This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the lid open to allow the inside of your washer to dry out. 2. Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur. Clean the following as recommended below: - Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads.
Maintenance Cleaning the mesh filter Clean the mesh filters in the water inlets once or twice a year. 1. Turn off the washer, and then unplug the power cord. 2. Close the water taps. 3. Loosen and disconnect the water hoses from the back of the washer. Cover the each hose with a cloth or towel to prevent water from gushing out. 4. Use pliers to pull out the mesh filter from the inlet valves. 5. Thoroughly clean the mesh filters in water. 6. Completely dry the mesh filters. Do not dry in direct sunlight. 7.
Cleaning the detergent drawer 1. Fully pull out the detergent drawer. 2. To remove, pull the detergent drawer while pushing the ends of each side in. English 47 Untitled-1 47 6/20/2019 2:24:59 PM Maintenance 3. Remove the inserts from the compartments. Rinse the inserts and the drawer in warm water and clean with a soft brush.
Maintenance 4. Clean the drawer opening thoroughly with a small, non-metallic brush. A B 5. Return the inserts to the proper compartments. Replace the drawer by placing the drawer rail (A) on the compartment rail (B) while tilting the drawer downward. 6. Fully push the drawer back to close.
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Action • Does not turn on. • • • • • • • • Does not start. • • Make sure the door is closed. Make sure the water taps are open. Make sure to press or tap Start/Pause (Hold to Start) to start the washing machine. Make sure Child Lock is not activated.
Troubleshooting Problem Action • • • • Water is not supplied. • • • • • After a cycle, detergent remains in the automatic • dispenser. • • • Troubleshooting Vibrates excessively or makes noise. • • • • • Make sure you press or tap Start/Pause (Hold to Start) after selecting the cycle and options. Make sure the water taps are open. Are the mesh filters in the water inlets clogged? Clean the mesh filters by brushing with a toothbrush. See page 46.
Problem Action • • • • Stops. • • • • • • • • • • Door (Lid) locked or will not open. • Fully open both water taps. Make sure the temperature selection is correct. Make sure the hoses are connected to the correct water taps. Flush the water lines. Disconnect the hoses and clean the mesh filters. The water inlet mesh filters may be clogged. See page 46. While the washing machine fills, the water temperature may change as the automatic temperature control feature checks incoming water temperature.
Troubleshooting Problem Action • • • • Does not drain and/or spin. • • • • • Load is wet at the end of • the cycle. • • • • Troubleshooting Leaks water. • • • • • Excessive suds. • • • Check the fuse or reset the circuit breaker. Make sure the electrical voltage is normal. Make sure the washing machine is plugged in. Make sure the drain hose is pointed downward. (Natural drain models only) Make sure the drain hose is not clogged. Make sure the drain hose is not kinked. Straighten the drain hose.
Problem Action • The spin basket or drain/supply hose is frozen. • • • • Water drains out immediately. • • • Stains on clothes. • • Make sure the drain hose is not clogged, and is hung over the drain hose hook. Fill the spin basket halfway with water, and try spinning again. Lift the end of the drain hose to prevent water from draining. Fill the spin basket halfway with water, and then run the Spin cycle after releasing the drain hose. Make sure the drain hose is installed correctly.
Troubleshooting Information codes The washer may display information codes to help you understand what is occurring with your washer better. Code Meaning The Water Level sensor is not working properly. • 1C Turn off the washer, unplug it, wait 30 seconds, and then plug the washer in again. If the information code remains, contact a Samsung customer service center. NOTE If the washer displays “1C”, the washer will automatically drain for 3 minutes. During this time, the Power button is inoperative.
Code Meaning Water is not draining. • • 5C • • • Make sure the drain hose is not frozen or clogged. Make sure the drain hose is positioned correctly, depending on the connection type. Clean the mesh debris filter as it may be clogged. Make sure the drain hose is straight all the way to the drain system. Turn off the washer, unplug it, wait one minute, and then plug the washer in again. If the information code remains, contact a Samsung customer service center.
Troubleshooting Code Meaning Check the drain hose. • • • LC Make sure the end of the drain hose is positioned correctly. Make sure the drain hose is not clogged. Turn off the washer, unplug it, wait one minute, and then plug the washer in again. If the information code remains, contact a Samsung customer service center. NOTE When the washer displays “LC”, the washer drains for 3 minutes. During this time, the Power button is inoperative. Water overflowed. OC • • Restart after spinning.
Code Meaning Check the MEMS sensor. 8C • • Power the washer off. Wait 2-3 minutes, power the washer on, and then try again. If the problem continues, call for service. For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG).
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Heat setting Warning symbols for laundering High Do not wash Medium Do not wring Low Do not bleach Any heat Do not tumble dry No heat / Air No steam (added to iron) Do not iron Iron dry or steam temperatures High Dry-clean Medium Dry-clean Low Do not dry-clean Line dry / Hang to dry Drip dry Dry flat Helping the environment • • • Save water and electricity by only washing full loads (the exact amount depends upon the program used).
Specification Declaration of conformity This appliance complies with UL2157.
LIMITED WARRANTY (U.S.A.) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL CONSUMER PURCHASER WITH PROOF OF PURCHASE This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
LIMITED WARRANTY (U.S.A.
LIMITATION OF REMEDIES YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY.
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.
Lavadora Manual del usuario WA50R5400A* Untitled-2 1 6/20/2019 2:26:40 PM
Contenido Información sobre seguridad 4 Contenido Lo que necesita saber sobre las instrucciones de seguridad Símbolos de seguridad importantes Precauciones de seguridad importantes PROPOSICIÓN 65 DE CALIFORNIA: ADVERTENCIA Advertencias fundamentales para la instalación Precauciones para la instalación Advertencias fundamentales para el uso Precauciones de uso Advertencias fundamentales para la limpieza 4 4 5 6 6 7 8 9 12 Instalación 13 Desempaque de la lavadora Componentes Requisitos de instalación I
44 Lavado eco de tambor Limpieza del exterior Limpieza del interior Mantenimiento luego de un período prolongado sin utilizar la lavadora Limpieza del filtro de malla Limpieza del cajón del detergente 44 45 45 45 46 47 Solución de problemas 49 Verificaciones Códigos de información 49 54 Especificaciones 58 Tabla de indicaciones sobre telas Ayuda al medioambiente Declaración de conformidad Hoja de especificaciones 58 59 60 60 Español 3 Untitled-2 3 6/20/2019 2:26:40 PM Contenido Mantenimiento
Información sobre seguridad Felicitaciones por la compra de la nueva lavadora Samsung. Este manual contiene información importante acerca de la instalación, el uso y el cuidado del electrodoméstico. Lea detenidamente estas instrucciones a fin de aprovechar al máximo los múltiples beneficios y funciones de la lavadora.
Precauciones de seguridad importantes ADVERTENCIA Para reducir el riesgo de incendio, descarga eléctrica o lesiones físicas cuando usa este electrodoméstico, siga las instrucciones de seguridad básicas que figuran a continuación: 2. No lave ni seque prendas que se han limpiado, lavado, remojado o salpicado previamente con gasolina, solventes de limpieza en seco u otras sustancias inflamables o explosivas, ya que emiten vapores que pueden encenderse o explotar. 3.
Información sobre seguridad PROPOSICIÓN 65 DE CALIFORNIA: ADVERTENCIA ADVERTENCIA Cáncer y afecciones reproductivas - www.P65Warnings.ca.gov. Información sobre seguridad Advertencias fundamentales para la instalación ADVERTENCIA Enchufe el cable de alimentación en un tomacorriente de pared de 120 V CA / 60 Hz categorizado en 15 A o más. Utilice el tomacorriente solo con este electrodoméstico. No use un cable prolongador.
No instale este electrodoméstico cerca de un calefactor o materiales inflamables. No instale este electrodoméstico en un lugar húmedo, grasiento o cubierto de polvo, ni lo exponga a la luz directa del sol o al agua (gotas de lluvia). No instale este electrodoméstico en un lugar donde pueda haber fugas de gas. Puede provocar una descarga eléctrica o un incendio. Enchufe el cable de alimentación firmemente en el tomacorriente de pared.
Información sobre seguridad Advertencias fundamentales para el uso ADVERTENCIA Si el electrodoméstico se inunda, desconéctelo inmediatamente y comuníquese con el centro de servicio Samsung más cercano. Información sobre seguridad Si el electrodoméstico genera ruidos extraños, olor a quemado o humo, desconéctelo de inmediato y llame al centro de servicio Samsung más cercano. • De lo contrario, se puede provocar una descarga eléctrica o un incendio. En caso de fugas de gas (tales como propano, LP, etc.
No introduzca la mano ni objetos de metal bajo la lavadora mientras esté en funcionamiento. • Puede provocar lesiones. No trate de reparar, desensamblar ni modificar el electrodoméstico usted mismo. • No utilice un fusible (de cobre, cable de acero, etc.) que no sea el estándar. Si necesita reparar o volver a instalar el electrodoméstico, comuníquese con el centro de servicio Samsung más cercano.
Información sobre seguridad Tras una falla del suministro de agua o cuando se vuelve a conectar la manguera de suministro, abra lentamente la llave de agua. Abra lentamente la llave de agua tras un período prolongado de falta de uso. • Información sobre seguridad La presión del aire de la manguera de suministro o de la conducción de agua puede dañar alguna pieza o provocar fugas de agua. Si durante el funcionamiento hay una falla en el drenaje, verifique el drenaje.
No haga funcionar la lavadora sin el dosificador de detergente. • Se puede provocar una descarga eléctrica o lesiones debido a fugas de agua. No introduzca las manos en el dosificador de detergente después de abrirlo. • La mano podría quedar apretada y sufrir lesiones. • Esto puede causar vibraciones anormales que pueden dañar la lavadora y, en el caso de las mascotas, puede provocar lesiones graves, o incluso la muerte.
Información sobre seguridad • Si lava alfombras o felpudos, se acumulará arena en el interior de la lavadora. Puede provocar fallas como la falta de drenaje. Advertencias fundamentales para la limpieza Información sobre seguridad ADVERTENCIA No limpie el electrodoméstico rociando directamente agua dentro de él. No utilice un agente limpiador muy ácido. No utilice benceno, disolventes de pinturas ni alcohol para limpiar el electrodoméstico.
Instalación Siga detenidamente estas instrucciones para asegurar una adecuada instalación de la lavadora y evitar accidentes al usarla. ADVERTENCIA Algunas piezas internas no están conectadas a tierra intencionalmente y pueden presentar riesgo de descarga eléctrica únicamente durante el servicio técnico. Personal del servicio técnico - No toque las siguientes piezas mientras el electrodoméstico está recibiendo electricidad: Panel de control, disipador térmico, motor, válvula de entrada, calentador y bomba.
Instalación Componentes Asegúrese de que todos los componentes estén incluidos en el paquete. Si tiene algún problema con la lavadora o las piezas, comuníquese con el centro de atención al cliente de Samsung o con el vendedor.
Partes suministradas Guía de la manguera Manual del usuario Sujetacables Tapón de la entrada de agua Partes no suministradas Instalación Mangueras de agua Herramientas necesarias para la instalación Llave inglesa Destornillador Phillips Nivelador Pinzas ajustables Cinta de medir NOTA • • Si pierde algún accesorio y desea adquirir un repuesto, comuníquese con el Centro de atención al cliente de Samsung (1-800-726-7864 (1-800-SAMSUNG)).
Instalación Requisitos de instalación Suministro eléctrico y conexión a tierra • • Fusible o interruptor de 120 V CA / 60 Hz / 15 A requerido. Utilice un circuito derivado individual. Conecte solo la lavadora al circuito. Para asegurar una conexión a tierra adecuada, la lavadora está equipada con un cable de alimentación que cuenta con un enchufe de tres pines con conexión a tierra para utilizar en un tomacorriente con conexión a tierra correctamente instalado.
Drenaje Samsung recomienda una toma de agua de 39 in (990 mm) de altura. La manguera de drenaje debe conectarse a la toma de agua a través del gancho, y la toma de agua debe cubrir totalmente la manguera de drenaje. Piso Para un mejor desempeño, la lavadora debe estar instalada sobre un piso sólido. Posiblemente los pisos de madera necesiten reforzarse para minimizar la vibración y/o el desequilibrio de la carga.
Instalación Requisito de espacio libre Este requisito de espacio libre solo se aplica a las lavadoras. NOTA • • Para el requisito de espacio libre para secadoras, consulte el manual del usuario de la secadora. Si la lavadora y la secadora tienen distintos requisitos de espacio libre, utilice el valor mayor. Instalaciones del electrodoméstico en un gabinete o en un hueco Espacio libre mínimo para un funcionamiento estable: Laterales Arriba Posterior Frente 1 in / 25 mm 21 in / 533 mm 5.
Instalación paso a paso PASO 1 Seleccionar una ubicación Requisitos de la ubicación: • • • • • Una superficie sólida y nivelada sin alfombras ni revestimientos para pisos que puedan obstruir la ventilación No expuesta a la luz directa del sol Espacio suficiente para la ventilación y el cableado La temperatura ambiente debe ser siempre superior al punto de congelación (32 °F / 0 °C) Alejada de fuentes de calor PRECAUCIÓN • • B A • • Asegúrese de usar mangueras de agua nuevas, y de que las juntas de go
Instalación 1. Ajuste las mangueras de agua a las llaves de agua fría y caliente con la mano hasta que estén bien apretadas. Luego, utilice pinzas para ajustar dos tercios de un giro más. No ajuste los accesorios de más para evitar dañarlos. 2. Jale las mangueras de agua para verificar que estén bien conectadas. Instalación 3. Coloque los otros extremos de las mangueras en una cubeta y abra las llaves de agua durante 10 a 15 segundos para eliminar las impurezas.
5. Abra las llaves de agua y verifique que no haya pérdidas. 1. Verifique la altura (A) de su sistema de drenaje y asegúrese de que se cumplan las alturas mínimas y máximas. Mínimo 39 in (99 cm) Máximo 96 in (245 cm) NOTA • • • Asegúrese de medir la altura desde el piso donde se apoya la lavadora. Es posible que la eficacia del drenaje sea menor si el sistema está a la altura máxima.
Instalación 3. Direccione la manguera de drenaje hacia el sistema de drenaje. PRECAUCIÓN A * (*): Mín. 6 in (152 mm), Máx. 8 in (203 mm) • • Instalación En caso de utilizar una toma de agua, asegúrese de que la conexión de la toma de agua y la manguera de drenaje no esté hermetizada. Si se utiliza una toma de agua, asegúrese de que la manguera de drenaje esté entre 6 in (152 mm) y 8 in (203 mm) dentro de la toma de agua. 4. Fije la manguera de drenaje con uniones de cable.
3. Si la lavadora no está nivelada, gire las patas niveladoras hacia la derecha (B) para bajar la lavadora y hacia la izquierda (C) para subirla.
Instalación PASO 5 Encendido Enchufe el cable de alimentación a un tomacorriente de 120 V CA / 60 Hz / 15 A aprobado y protegido por un disyuntor o fusible de 15 A. Luego, presione Encender/Apagar para encender la lavadora. PASO 6 Ejecutar un ciclo de prueba Ejecute el ciclo de prueba como se explica a continuación para verificar si la lavadora está correctamente instalada. 1. Cargue aproximadamente 6 lb de ropa en el tambor. 2. Presione Encender/Apagar para poner en funcionamiento la lavadora. 3.
Antes de comenzar Configuración inicial Ejecutar la calibración (recomendado) La Calibración asegura que la lavadora detecte el peso con precisión. Asegúrese de que el tambor esté vacío antes de ejecutar la calibración. 1. Presione Encender/Apagar para poner en funcionamiento la lavadora. 2. Mantenga presionados simultáneamente Temp. (Temperatura) y Delay End (Final Diferido) durante 3 segundos. 3.
Antes de comenzar PASO 3 Utilizar una red para ropa • • • Los sostenes (lavables con agua) se deben colocar dentro de una red para ropa. Las partes metálicas de los sostenes pueden atravesar la tela y dañar otras prendas. Es posible que las prendas de cashmilon y las prendas de gran tamaño y poco peso (p. ej. prendas con encaje, lencería, medias de nailon, telas sintéticas, etc.) floten en el agua durante el lavado y causen problemas a la lavadora.
PASO 4 Prelavar (si es necesario) • • • Para quitar las manchas y suciedades en cuellos, mangas, dobladillos y bolsillos, aplique detergente y cepille. Utilice detergentes en polvo o líquidos. No utilice jabón ya que este podría permanecer en el tambor después del lavado. Lave previamente calcetines, mangas y cuellos de color blanco con un poco de detergente y un cepillo. PRECAUCIÓN Asegúrese de que la ropa esté completamente dentro.
Antes de comenzar PASO 6 Agregar el tipo de detergente adecuado El tipo de detergente adecuado depende del tipo de tejido (algodón, sintético, prendas delicadas, lana), color, temperatura de lavado y grado de suciedad. Use siempre detergente de alta eficacia (HE) y "baja espuma", diseñado para las lavadoras automáticas. NOTA • • Siga las recomendaciones del fabricante del detergente en función del peso de la ropa, el grado de suciedad y la dureza del agua en su zona.
Pautas para el cajón para detergente La lavadora está equipada con un dosificador de dos compartimientos para detergente y suavizante. El compartimiento para el blanqueador está del lado izquierdo del tambor. A. Compartimiento para el suavizante: Vierta la cantidad recomendada de suavizante en el compartimiento para el suavizante. A B C. Compartimiento para el blanqueador: Agregue el blanqueador según las instrucciones del fabricante.
Antes de comenzar Para agregar productos de lavado en el cajón para detergente 1. Abra la tapa. 2. Abra el cajón para detergente. 3. Agregue detergente líquido en el compartimiento para el detergente. Asegúrese de que el contenedor para detergente esté insertado. NOTA • • Antes de comenzar No agregue detergente en polvo ni otros productos de lavado en polvo al contenedor para detergente líquido. Para utilizar detergentes en polvo, consulte la sección Para utilizar detergente en polvo en la página 31. 4.
Para utilizar detergente en polvo Primero retire el contenedor para detergente líquido provisto del compartimiento para el detergente. Luego, agregue detergente en polvo en el compartimiento para el detergente siguiendo las instrucciones del fabricante de detergente. PRECAUCIÓN No agregue detergente en polvo en el contenedor para detergente líquido.
Funcionamiento ADVERTENCIA Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, lea Información sobre seguridad antes de poner en funcionamiento el electrodoméstico. Panel de control 02 07 10 08 11 09 12 13 01 03 04 05 14 06 Funcionamiento 01 Selector de ciclos Gire el disco para seleccionar un ciclo. (Para obtener más información sobre los ciclos de lavado, consulte la página 38).
Presione para cambiar la velocidad de centrifugado del ciclo que se está ejecutando. • 05 Spin (Centrifugar) • • • • High (Alta) (Nivel 5): Extiende el proceso de centrifugado para eliminar con eficacia la humedad de la carga. Este nivel utiliza un proceso de centrifugado más fuerte que elimina la humedad, por lo que no es adecuado para telas sin arrugas y que no necesitan planchado ni para sobrecargas. (Nivel 4): Ropa interior, camisetas, jeans y algodones resistentes.
Funcionamiento 11 Deep Fill (Llenado profundo) Use esta opción cuando se necesita más agua. NOTA Con esta función, puede extender la duración del ciclo. 12 Smart Care Esta función permite verificar el estado de la lavadora con un teléfono inteligente. 13 Encender/Apagar Presione para encender o apagar la lavadora. 14 Inicio/Pausa (Hold to Start (Mantenga presionado para iniciar)) Mantenga presionado para iniciar el funcionamiento o presione para detenerlo temporalmente.
Sencillos pasos para comenzar 2 1 5 4 3 1. Presione Encender/Apagar para poner en funcionamiento la lavadora. 2. Gire el selector de ciclos para seleccionar el ciclo deseado. 3. Cambie los ajustes del ciclo (Temp. (Temperatura), Rinse (Enjuagar), Spin (Centrifugar) y Soil (Suciedad)) según sea necesario. 4. Seleccione las opciones deseadas según sea necesario. 5. Mantenga presionado Inicio/Pausa (Hold to Start (Mantenga presionado para iniciar)). 1.
Funcionamiento Descripción de los ciclos NOTA La lavadora detecta el peso de las prendas y regula automáticamente el nivel del agua, tiempo de lavado, cantidad de enjuagues y tiempo de centrifugado óptimo. (Puede no aplicar para algunos ciclos). Ciclo Descripción • Para ropa de algodón, de cama y de mesa, ropa interior, toallas o camisas. La duración del lavado y el número de enjuagues se ajustan automáticamente de acuerdo con la carga.
Ciclo Descripción • • Para cargas que solo requieren enjuague y centrifugado. También puede seleccionar este ciclo para un proceso adicional de enjuague y centrifugado luego de ejecutar otro ciclo. • • Para cargas que solo requieren centrifugado. También puede seleccionar este ciclo para un proceso adicional de centrifugado luego de ejecutar otro ciclo. • SELF CLEAN (LAVADO ECO DE • TAMBOR) • Limpia el tambor al eliminar la suciedad y las bacterias presentes. Ejecútelo una vez cada 20 lavados.
Funcionamiento Tabla de ciclos Use esta tabla para configurar el mejor ciclo y las mejores opciones para su ropa. NOTA Ajuste Temp.
Ciclo Spin (Centrifugar) Soil (Suciedad) 5 4 3 2 1 5 4 3 2 1 NORMAL – HEAVY DUTY (CARGA PESADA) WHITES (ROPA BLANCA) DELICATES (DELICADOS) – – – – – – PERM PRESS (PLANCHA PERMANENTE) BEDDING/WATERPROOF (ROPA DE CAMA/ PRENDAS IMPERMEABLES) – QUICK WASH (LAVADO RÁPIDO) ACTIVEWEAR (ROPA DEPORTIVA) –
Funcionamiento Funciones especiales Chorro de agua (para prelavado) Puede usar la función Active Waterjet (Chorro de agua) para lavar sus prendas a mano antes de colocarlas en la lavadora. 1. Presione Encender/Apagar para poner en funcionamiento la lavadora. 2. Abra la tapa. 3. Presione Active Waterjet (Chorro de agua) para suministrar agua. 4. Lave las prendas a mano. 5. Cuando haya terminado, presione Active Waterjet (Chorro de agua) nuevamente para detener el agua.
• • Debido a las diferencias de presión del aire, el agua de Active Waterjet (chorro de agua) puede salpicar cuando se activa por primera vez. Asegúrese de que la tapa esté bien cerrada antes de comenzar una carga de ropa. Final Diferido Puede hacer que la lavadora finalice automáticamente el lavado más tarde al seleccionar un tiempo de retardo de entre 1 y 24 horas (en incrementos de 1 hora). La pantalla indica la hora a la que finalizará el lavado. 1. Seleccione un ciclo.
Funcionamiento ATC (control automático de la temperatura) La función ATC permite a la lavadora controlar la temperatura del agua en cada ciclo de lavado mediante el termistor interno. Está diseñada para mantener ciertas temperaturas de lavado a fin de obtener los mejores resultados. NOTA • • Si selecciona NORMAL o HEAVY DUTY (CARGA PESADA), es posible que advierta que la lavadora suministra agua fría. Esto es normal, ya que la máquina está diseñada para reducir el consumo energético.
Desactivación de la función Seguro para niños Mantenga presionados simultáneamente Temp. (Temperatura) y Rinse (Enjuagar) durante aproximadamente 3 segundos. • • Si se desactiva la función Child Lock (Seguro para niños), el indicador de Child Lock (Seguro para niños) se apaga. La función Child Lock (Seguro para niños) impide que los niños o las personas discapacitadas pongan en funcionamiento la lavadora accidentalmente y se lesionen.
Mantenimiento Mantenga la lavadora limpia para lograr un mejor rendimiento y prolongar su vida útil. ADVERTENCIA Algunas piezas internas no están conectadas a tierra intencionalmente y pueden presentar riesgo de descarga eléctrica únicamente durante el servicio técnico. Personal del servicio técnico - No toque las siguientes piezas mientras el electrodoméstico está recibiendo electricidad: Panel de control, disipador térmico, motor, válvula de entrada, calentador y bomba.
Limpieza del exterior 1. Cierre las llaves del agua después de finalizar el lavado del día. Esto cerrará el suministro de agua a la lavadora y evitará la improbable posibilidad de que se produzcan daños a causa de un derrame de agua. Deje la tapa abierta para que el interior de la lavadora pueda secarse. 2. Use un paño suave para limpiar todo el detergente, el blanqueador u otros derrames a medida que ocurran.
Mantenimiento Limpieza del filtro de malla Limpie los filtros de malla de las entradas de agua una o dos veces por año. 1. Apague la lavadora y, luego, desenchufe el cable de alimentación. 2. Cierre las llaves de agua. 3. Afloje y desconecte la manguera de agua de la parte trasera de la lavadora. Cubra la mangueras con un paño o toalla para evitar la fuga de agua. 4. Use unas pinzas para sacar el filtro de malla de la válvula de entrada. 5. Limpie exhaustivamente el filtro de malla con agua. 6.
Limpieza del cajón del detergente 1. Abra por completo el cajón para detergente. 2. Para retirarlo, tire del cajón para detergente por los extremos laterales. Español 47 Untitled-2 47 6/20/2019 2:26:50 PM Mantenimiento 3. Retire los insertos de los compartimentos. Enjuague los insertos y el cajón con agua tibia y límpielos con un cepillo blando.
Mantenimiento 4. Limpie la abertura del cajón cuidadosamente con un cepillo pequeño y no metálico. A B 5. Coloque el inserto nuevamente en los compartimientos correspondientes. Reemplace el cajón al colocar el riel del cajón (A) en el riel del compartimiento (B) mientras inclina el cajón hacia abajo. 6. Empuje completamente el cajón para cerrarlo.
Solución de problemas Verificaciones Si tiene algún problema con la lavadora, primero consulte la tabla siguiente y pruebe las sugerencias. Problema Acción • • No enciende. • • • • • • • No se inicia. • • Asegúrese de que la puerta esté cerrada. Asegúrese de que las llaves de agua estén abiertas. Asegúrese de presionar o tocar Inicio/Pausa (Hold to Start (Mantenga presionado para iniciar)) para iniciar el funcionamiento de la lavadora. Asegúrese de que Child Lock (Seguro para niños) no esté activado.
Solución de problemas Problema Acción • • • No se suministra agua. • • • • • • Después de un ciclo, queda detergente en el dosificador automático. • • • Solución de problemas • Vibra de manera excesiva o hace ruido. • • • • • Asegúrese de presionar o tocar Inicio/Pausa (Hold to Start (Mantenga presionado para iniciar)) después de seleccionar el ciclo y las opciones. Asegúrese de que las llaves de agua estén abiertas.
Problema Acción • • • • Se detiene. • • • • • • • • • • La puerta (tapa) está trabada o no se abre. • Abra por completo ambas llaves de agua. Asegúrese de que la selección de temperatura sea la correcta. Asegúrese de que las mangueras estén conectadas a las llaves correctas. Purgue las cañerías. Desconecte las mangueras y limpie los filtros de malla. Los filtros de malla de la entrada de agua pueden estar obstruidos. Consulte la página 46.
Solución de problemas Problema Acción • • • • No drena y/o no centrifuga. • • • • • La carga está húmeda al finalizar el ciclo. • • • • Solución de problemas • Pierde agua. • • • • • Revise el fusible o reinicie el disyuntor. Asegúrese de que el voltaje eléctrico sea normal. Asegúrese de que la lavadora esté enchufada. Asegúrese de que la manguera de drenaje esté dirigida hacia abajo. (Modelos de drenaje natural solamente) Asegúrese de que la manguera de drenaje no esté obstruida.
Problema Acción • Exceso de espuma. • • • La cesta de centrifugado o la manguera de drenaje/ suministro está congelada. • • • • • El agua se drena inmediatamente. • Hay manchas en la ropa. • • • Tiene olor. • • Utilice agua tibia para desconectar la manguera de suministro o la manguera de drenaje. Remójelas en agua tibia. Llene la cesta de centrifugado con agua tibia y, luego, espere aproximadamente 10 minutos. Coloque una toalla caliente sobre el conector de la manguera de drenaje.
Solución de problemas Códigos de información La lavadora puede mostrar códigos de información para ayudarle a comprender mejor cuál es el problema. Código Significado El sensor de nivel de agua no está funcionando bien. • 1C Apague la lavadora, desenchúfela, aguarde 30 segundos y vuelva a enchufarla. Si el código de información permanece, comuníquese con un centro de servicio al cliente de Samsung. NOTA Si en la pantalla se muestra “1C”, la lavadora drenará automáticamente durante 3 minutos.
Código Significado El agua no drena. • • 5C • • • Asegúrese de que la manguera de drenaje no esté congelada ni obstruida. Asegúrese de que la manguera de drenaje esté correctamente posicionada, según el tipo de conexión. Limpie el filtro de residuos de malla ya que puede estar obstruido. Asegúrese de que la manguera de drenaje esté completamente enderezada hasta el sistema de drenaje. Apague la lavadora, desenchúfela, aguarde un minuto y vuelva a enchufarla.
Solución de problemas Código Significado Verifique la manguera de drenaje. • LC • • Asegúrese de que el extremo de la manguera de drenaje esté correctamente posicionado. Asegúrese de que la manguera de drenaje no esté obstruida. Apague la lavadora, desenchúfela, aguarde un minuto y vuelva a enchufarla. Si el código de información permanece, comuníquese con un centro de servicio al cliente de Samsung. NOTA Cuando en la pantalla se muestra “LC”, la lavadora se drena durante 3 minutos.
Código Significado Revise el sensor MEMS. 8C • • Apague la lavadora. Espere 2-3 minutos, ponga la lavadora en marcha y vuelva a intentarlo. Si el problema continúa, llame al servicio técnico. Para los códigos que no figuran más arriba, llame al 1-800-726-7864 (1-800-SAMSUNG).
Especificaciones Tabla de indicaciones sobre telas Los siguientes símbolos ofrecen indicaciones acerca de las prendas. La etiqueta de indicaciones de la prenda incluye símbolos para secado, blanqueado, secado y planchado, o limpieza en seco cuando son necesarios. El uso de símbolos garantiza la consistencia entre los fabricantes textiles de artículos nacionales e importados. Siga las indicaciones de la etiqueta para optimizar la vida útil de la prenda y reducir los problemas del lavado.
Ajuste del calor Símbolos de advertencia para el lavado Alto No lavar Medio No retorcer Bajo No usar blanqueador Cualquier calor No secar en secadora Sin calor/aire Sin vapor (agregado a la plancha) No planchar Temperaturas de secado con plancha o vapor Alta Limpiar en seco Media Limpiar en seco Baja No limpiar en seco Secar colgado/tender Colgar para que escurra Secar en posición horizontal Ayuda al medioambiente • • • Ahorre agua y electricidad utilizando solo la capacidad total de la
Especificacione Declaración de conformidad Este electrodoméstico cumple con la norma UL2157.
Garantía limitada (Estados Unidos) LAVADORA SAMSUNG GARANTÍA LIMITADA AL COMPRADOR CONSUMIDOR ORIGINAL CON PRUEBA DE COMPRA El presente producto de la marca SAMSUNG, tal como lo provee y distribuye SAMSUNG ELECTRONICS AMERICA, INC.
Garantía limitada (Estados Unidos) La presente garantía limitada cubre defectos de fabricación de los materiales o la mano de obra que ocurran durante el uso normal y doméstico de este producto y no cubrirá lo siguiente: daños que ocurran durante el envío, entrega e instalación y usos para los cuales el presente producto no fue destinado; daños causados por modificación o alteración no autorizada del producto; producto cuyos números de serie originales de fábrica fueron eliminados, desfigurados, alterados e
LIMITACIÓN DE RECURSOS EL ÚNICO Y EXCLUSIVO RECURSO ES LA REPARACIÓN DEL PRODUCTO, EL REEMPLAZO DEL PRODUCTO O LA DEVOLUCIÓN DEL IMPORTE DE COMPRA, A DISCRECIÓN DE SAMSUNG, CONFORME A ESTA GARANTÍA LIMITADA.
Scan this with your smartphone ¿PREGUNTAS O COMENTARIOS? PAÍS LLAME AL O VISÍTENOS EN LÍNEA EN U.S.A 1-800-SAMSUNG (726-7864) www.samsung.