User Manual

ENGLISH

[▲ ]

[▼ ]

◆

✤

The button and switch you use when playing the video file

[OK] Button: Play or pause the video file

[▲ ] Switch: In <Video Play> mode: Press it to move to previous

file. Press and hold it to use RPS function.

(RPS rate: -x2, -x4, -x8, -x16, -x32, -x64, -x128)

[▼ ] Switch: In <Video Play> mode: Press it to move to next file.

Press and hold it to use FPS function.

(FPS rate: x2, x4, x8, x16, x32, x64, x128)

In <Video Play> mode:Press it and hold it to play

slowly when paused. Press it to move to the next

frame when paused.

Adjusting the Sound

1. Press the [ OK ] button to play the video file.

2. Press the [+] button to increase the volume.

◆ Each time you press the [+] button, the

volume bar increases and the sound level will

get louder.

◆ The volume bar disappears after 1~2 seconds.

3. Press the [-] button to decrease the volume.

◆ Each time you press the [-] button, the

volume bar decreases and the sound level

will get quieter.

◆ The volume bar disappears after 1~2 seconds.

Notes

✤ You can adjust the volume up to 10 steps.

✤ You can also play the video file on a TV screen by connecting the

CAM to a TV. (Refer to page 106)

✤ You must install the ImageMixer software (see page 110) to

playback video files recorded on the CAM on your PC.

Video Mode : Playing

ENGLISH

3939

00:01 / 00:16

Video Play 100-0056

00:01 / 00:16

Video Play 100-0056