Memory Camcorder user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
key features of your memory camcorder MPEG4 Encoding Records enhanced quality video in MPEG4 ASP(Advanced Simple Profile) format (720 x 480) onto memory cards at 30 fps for high resolution, life-like images. High-capacity embedded Flash Memory (4GB) (SC-MX10A/MX10AU only) The camcorder has built-in high capacity flash memory that allows you to record movie images.
Enjoying Various Playback Features Unlike tape operation, playback is simple and easy in this memory camcorder since no time is needed for rewinding or fast forward operations. Various functions are available for enjoying many different types of playback. ➥page 58 ~ 61 Play back on your PC USB 2.0 enables the smooth transfer of movies you've recorded to a computer. With the bundled software, you can easily transfer and play back movies on your PC.
safety warnings What the icons and signs in this user manual mean : Means that death or serious personal injury is a risk. WARNING Means that there is a potential risk for personal injury or material damage. CAUTION CAUTION To reduce the risk of fire, explosion, electric shock, or personal injury when using your memory camcorder, follow these basic safety precautions: Means hints or referential pages that may be helpful when operating the memory camcorder.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug.
important safety instructions 17. POWER SOURCES: The CAMCORDER should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company. A CAMCORDER is intended to be operated from battery power, or other sources, refer to the operating instructions. 18.
22. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 23. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 24.
important safety instructions 29. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 30. If this power supply is used at 240V ac, a suitable plug adapter should be used. 31. This product is covered by one or more of the following U.S.
precautions Warning! This camcorder should always be connected to an AC outlet with a protective grounding connection. Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. If this power supply is used at 240V ac, a suitable plug adaptor should be used.
important information on use BEFORE USING THIS CAMCORDER • This memory camcorder records video in MPEG4 format and at Standard Resolution (SD-VIDEO). • Please note that this memory camcorder is not compatible with other digital video formats. • Before recording important video, make a trial recording. - Play back your trial recording to make sure the video and audio have been recorded properly.
precautions on use IMPORTANT NOTE • Handle the liquid crystal display (LCD) with care: - The LCD is a very delicate display device: Do not press its surface with excessive force, hit it or prick it with a sharp object. - If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn the camcorder off, wait for a few moments, and then turn it on again. - Do not place the camcorder with the open LCD screen down.
precautions on use • No water or oil! - Water or oil entering the memory camcorder or AC power adaptor could cause electric shock, malfunctions or defects. • Heat on surface of product: - The surface of the memory camcorder will be slightly warm when in use, but this does not indicate a fault. • Be careful of unusual ambient temperature: -U sing the memory camcorder in a place where the temperature is over 140°F (40°C) or lower than 32°F (0°C) may result in abnormal recording/playback.
• Do not expose the memory camcorder to soot or steam: - Thick soot or steam could damage the memory camcorder case or cause a malfunction.
precautions on use ABOUT THIS USER MANUAL • T his User Manual covers models SC-MX10, SC-MX10P, SC-MX10A and SC-MX10AU. The SC-MX10A and SC-MX10AU have a built-in 4 GB flash memory, but also use Memory cards. The SC-MX10, SC-MX10P does not have built-in flash memory and uses Memory cards exclusively. Although some features of SC-MX10, SC-MX10P, SC-MX10A and SC-MX10AU are different, they operate in the same way. • Illustrations of model SC-MX10A are used in this user manual.
contents GeTTING TO KNOW YOUR memory camcorder 06 07 08 09 Quick Start Guide What's included with your memory camcorder Front & left view Side & bottom view PREPARATION 10 12 20 21 22 25 26 27 27 28 29 30 Using the accessories Connecting a power source Button type battery installation Basic operation of your memory camcorder LCD screen indicators Turning the screen indicators on/off ( Using the LCD enhancer Adjusting the LCD screen Using the MENU button Using the Control buttons Shortcut menu (OK Guide
contents recording options 45 47 48 48 49 50 51 52 53 54 55 55 56 56 Changing the menu settings Menu items Recording menu items Scene Mode (AE) White Balance Exposure Anti-shake(EIS) Digital Effects Focus Back Light 16:9 Wide Quality Resolution Digital Zoom play back options 57 58 59 60 61 61 Setting the play option Deleting movie images Protecting movie images Copying movie images (SC-MX10A/MX10AU only) 16:9 Wide File Information SETTING OPTIONS 62 63 64 64 64 64 65 65 65 66 Changing the menu sett
66 66 67 67 68 68 68 68 68 File no.
quick start guide • This chapter introduces you to the basic features of your memory camcorder. • See the reference pages for more information.
getting to know your memory camcorder WHAT'S INCLUDED with YOUR Memory Camcorder Your new memory camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung’s Customer Care Center. ✪ The exact shape of each item may vary by model.
getting to know your memory camcorder FRONT & LEFT VIEW 11 1 2 3 4 5 6 8 7 1 2 3 4 5 6 Lens Internal microphone MENU button OK button Control button ( Recording start/stop button 08_English 7 8 9 10 ) 11 LCD screen Built-in speaker button LCD ENHANCER ( Zoom lever (W/T) 9 10 ) button
Side & Bottom View 10 1 2 9 3 8 4 11 12 7 6 5 1 2 3 4 5 6 7 8 MODE indicator (record( Multi cable jack (AV/ S ) USB jack (USB) DC IN jack (DC IN) EASY.
preparation This section provides information on using this memory camcorder : such as how to use the provided accessories, how to charge the battery, how to setup the operation mode and initial setup. USING THE ACCESSORIES Attaching a Grip Belt • Insert your right hand from the bottom of memory camcorder up to the base of your thumb. • Put your hand in a position where you can easily operate the Recording start/stop button and the Zoom lever.
Attaching a Lens Cap Pass the provided string through the hole in the grip belt attachment part and pass it through the hole in the lens cap. 1. Attach the lens cap string to lens cap. Shorter side is for the lens cap. 2. Attach the string to the attachment hole of memory camcorder. Detaching the grip belt makes things easier. 3. Push both sides of cap inward and attach it over the lens.
preparation CONNECTING A POWER SOURCE • There are two types of power source that can be connected to your memory camcorder. • Do not use provided power supply units with other equipment. - The battery pack: used for outdoor recording. - The AC power adapter : used for indoor recording. ➥page 19 Insert To Charge the Battery Pack • Be sure to charge the battery pack before you start using your memory camcorder.
About battery packs • T he battery pack should be recharged in an environment that is between 32°F (0°C) and 104°F (40°C). However, when it is exposed to cold temperatures (below 32°F (0°C)), its usage time becomes reduced and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then reattach it to the memory camcorder. • The recording time shortens dramatically in a cold environment.
preparation • The recording time is affected by temperature and environmental conditions. • We recommend only using the original battery pack that is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste. • Clean the terminals to remove any foreign substances before inserting the battery. • Do not put the battery pack near any heat source (i.e. fire or a heater).
Charging, recording and playback times with fully charged battery pack (with no zoom operation, etc.) • For your reference, the approximate time with fully charged battery pack: Battery type IA-BP85ST Charging time approx. 2 hr. Media Built-in memory SDHC/ MMCplus Mode Super Fine Fine Normal Continuous recording time approx. 115min. approx. 120min. approx. 125min. Playback time approx. 230min. approx. 230min. approx. 230min. Continuous recording time approx. 120min. approx. 125min.
preparation To check the remaining battery charge • When the camcorder is turned off (battery is installed) press and release the button to display the remaining capacity of the battery capacity. • When the camcorder is turned on (battery is installed) press and hold the button for more than 2-3 seconds to display the remaining battery capacity. Press the button again or any other button to return to the initial OSD while the battery information is displayed.
Battery Level Display The Battery Level Display shows the amount of battery power remaining in the battery pack. Battery Level Indicator State Message Fully charged - 20~40% used - 40~60% used - 60~80% used - 80~95% used - Exhausted(flickers): The device will soon turn off. Change the Battery Pack as soon as possible. - (flickers): The device will be forced to turn off after 5 seconds.
preparation Charging the Battery Pack 1 The IA-BP85ST battery pack provided with this memory camcorder may be charged a little at purchase time: Charge it fully before using the memory camcorder. • Use IA-BP85ST battery pack only. 1. 2. 3. 4. Slide the POWER switch downward to turn off the power. Insert the battery pack. Open the LCD screen and jack cover. Connect the AC power adapter to the DC IN jack of your memory camcorder. 5. Connect the AC power adapter to a wall socket.
Charging indicator Tips for battery identification • The color of the LED indicates charging status. - If the battery has been fully charged, the charge indicator is green. If you are charging the battery, the color of the charge indicator is orange. The charge indicator flickers if the battery is abnormal.
preparation BUTTON TYPE BATTERY INSTALLATION • The button type battery maintains the clock function and preset contents of the memory : even if the battery pack or AC power adapter is removed. 1. Insert the button type battery in the battery slot on the bottom of the memory camcorder. 2. Position the button type battery with the positive ( + ) terminal face down in the button type battery slot.
BASIC OPERATION OF YOUR MEMORY CAMCORDER This section explains the basic techniques of recording movies, and also basic settings on your memory camcorder. Set the appropriate operation mode according to your preference using POWER switch and MODE button. Turning memory camcorder on or off You can turn the power on or off by sliding the POWER switch down. • Slide the POWER switch repeatedly to toggle the power on or off.
preparation LCD SCREEN INDICATORS 1 2 3 Movie Record mode 4 1 2 120 MIN STBY 00:00:00/00:58:00 5 17 6 16 7 15 8 3 4 9 14 10 EASY.Q 2007/01/01 12:00AM 11 5 6 7 8 13 15 12 9 12 10 11 • • • • The above screen is an example for explanation: The displays in this user manual may not be exactly the same as those you see on the LCD screen. The OSD indicators are based on memory capacity of 2GB(MMC plus). Functions marked with * won’t be kept when the memory camcorder is shut down.
LCD SCREEN INDICATORS Movie Record mode: Shortcut menu (OK Guide) 120 MIN STBY 00:00:00/00:58:00 1 2 3 5 4 4 WB 5 3 2 1 1 2 Movie Play mode 3 4 5 6 1 2 Delete 3 120 MIN 100-0001 7 4 5 10 8 6 7 9 Move Screen size (16:9 Wide/4:3) Focus (Auto Focus/Manual Focus) * Shortcut menu (OK Guide) / Return White balance * Exposure (Auto Exposure/Manual Exposure) OK Play MENU Exit 8 9 10 Movie Play mode Menu name (Delete, Protect, Copy) Protect File Name Storage media (Built-in memory (SC-
preparation LCD SCREEN INDICATORS 1 2 3 Movie Play mode 4 1 00:00:00/00:23:00 120 MIN 12 5 6 11 2 3 4 7 5 10 6 7 9 2007/01/01 12:00AM 100-0001 8 8 9 10 00:00:00/00:23:00 120 MIN 11 12 Movie Play mode Play Status Time code (Elapsed time / Recorded time) Storage media (Built-in memory (SC-MX10A/MX10AU only) or memory card) Battery info.
TURNING THE SCREEN INDICATORS ON/OFF ( ) Switching the information display mode • You can switch the display mode of on-screen information: Press the button. The full and minimum display modes will alternate. • Full display mode: All types of information will appear. • Minimum display mode: Only operating status indicator will appear.
preparation USING THE LCD ENHANCER • Contrast is enhanced for a clear and bright image on the LCD screen. This effect is also implemented outdoors in bright daylight. 1. Press the LCD ENHANCER ( ) button. The selected function icon is displayed. 2. To exit LCD ENHANCER, press the LCD ENHANCER ( ) button again. LCD ENHANCER function does not affect the quality of the image being recorded.
ADJUSTING THE LCD SCREEN 1. Open up the LCD screen 90 degrees with your finger. 2. Rotate it to the best angle to record or play. • If you rotate the LCD screen 180 degrees to the lens side, you can close the LCD screen with it facing out. This is convenient during playback. • • WARNING See page 65 to adjust brightness and color of the LCD screen. Over-rotation may cause damage to the inside of the hinge that connects the LCD screen to the memory camcorder.
preparation USING THE CONTROL BUTTONS Used for playback, pausing, fast forwarding, and rewinding. Also used as directional buttons (up, down, left, right) and to make a selection when selecting movie images or menus. 1. Press the Control button ( / ) to move left / right. 2. Press the Control button ( / ) to move up / down. • Confirm your selection by pressing the OK button. • • Control button (OK / ( / )) does not operate in the EASY.Q mode. Using the OK button, you may directly access the shortcut menu.
SHORTCUT MENU (OK GUIDE) Shortcut menu (OK guide) represents the most frequently accessed functions according to the selected mode. 1. Press the OK button. • Shortcut menu (OK guide) is displayed. 2. Press the Control button ( / / / ) to control the setting. 3. Press the OK button to confirm your selection. OK • Press the OK button to exit the shortcut menu.
preparation INITIAL SETTING : OSD LANGUAGE & DATE AND TIME • Initial setting is available in all operating modes. • To read the menus or messages in your desired language, set the OSD language. To store the date and time during recording, set the date/time. How to set the settings mode 1. 2. 3. 4. Slide the POWER switch downward to turn on the memory camcorder. Press the MENU button. Press the Control button ( / ) to select "Settings". Press the OK button. • The settings menu screen appears.
Setting Date and Time Set the current date and time so that the date and time at which you make a recording can be recorded correctly. The following procedure can also be used to correct the date and time you have already set. 1. Set the "Settings" mode. • The settings menu screen appears. • Refer to "How to set the settings mode" for accessing to " Settings " mode. ➥page 30. 2. Press the Control button ( / ) to select "Date/Time Set" and then press the OK button. 3.
about the storage media SELECTING THE STORAGE MEDIA (SC-MX10A/MX10AU ONLY) You can record moving on the built-in memory or a memory card, so you should select the desired storage media before starting recording or playback. Selecting the storage media (SC-MX10A/MX10AU only) • Selecting the recording medium is available in the Movie record / Movie Play modes. Movie images can be stored and played back using the built-in memory or a memory card. Set the memory type before recording and playing back images.
Using the built-in memory (SC-MX10A/MX10AU only) • This memory camcorder has an embedded 4GB memory which can be recorded on. Using a memory card (not supplied) • This memory camcorder has multi card slot for access to SDHC (Secure Digital High Capacity) and MMCplus. - Some cards are not compatible depending on the memory card manufacturer and memory card type. • • If you insert a memory card when the memory camcorder is on, the pop-up message will prompt you automatically to select the storage type.
about the storage media SELECTING A SUITABLE MEMORY CARD A memory card is a compact portable storage media. Usable Memory Cards • You can use SDHC and MMC plus cards. (128MB ~8GB) - You can also use a SD memory card, but it must be less than 4GB. • On this memory camcorder, you can use memory cards of the following capacity: 128MB ~ 8GB • Compatible recording media Terminals -The following recording media have been guaranteed to work with this memory camcorder.
Handling a memory card It is recommended that you power off before inserting or removing the memory card to avoid data loss. It is not guaranteed that you can use a memory card formatted by other devices. Be sure to format your memory card using this camcorder. • You have to format newly-purchased memory cards or memory cards with data that your camcorder cannot recognize or are saved by other devices. Note that formatting erases all data on the memory card.
about the storage media Recordable time and capacity Recordable time for movie images Super Fine Media built-in memory SDHC/ MMCplus Fine Capacity 352X240P 720X480i(480i)/ 352X240P (240p) 720x480p(480p) (240p) 720X480i(480i)/ 720x480p(480p) Normal 352X240P 720X480i(480i)/ 720x480p(480p) (240p) 4GB approx. 170min. approx. 112min. approx. 256min. approx. 170min. approx. 512min. approx. 256min. 1GB approx. 43min. approx. 28min. approx. 64min. approx. 43min. approx. 128min. approx. 64min.
To facilitate the movie recording, it is recommended to use a memory card that supports faster write speed. (Write speed: 1.25 MB / sec or higher) If you use a low write-speed memory card, recording may stop with a message of "Low speed card. Please record at lower quality". If you inevitably use a low speed card, select a lower quality ("Fine" → "Normal") or set the movie size to 352p. • Memory cards of bigger than 8GB in capacity may not work properly.
recording Basic procedures to record movie images described below. RECORDING MOVIE IMAGES • Memory camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and the other one is on the LCD panel. Select the Recording start/ stop button that works best for you. 1. Turn the memory camcorder on. • Connect a power source to the memory camcorder. ➥pages 12,18 (A battery pack or an AC power adapter) • Slide the POWER switch downward to turn on the power.
• • • • • • • • • • • • ject the battery pack when you have finished recording to prevent unnecessary battery power consumption. E For on-screen information display. ➥page 22 For approximate recording time. ➥page 36 For various functions available when you record movie images. ➥page 45~56 If focusing is difficult, use the manual focus function. ➥page 53 During recording, some button operations are unavailable. (MENU button, etc.
recording RECORDING WITH EASE FOR BEGINNERS (EASY.Q MODE) • 1. 2. 3. 4. With the EASY.Q function, most of the memory camcorder settings are automatically adjusted, which frees you from detailed adjustments. Slide the POWER switch downward to turn on the memory camcorder. Press the MODE button to set Movie Record mode ( ). ➥page 21 Press the EASY.Q button. • When you press the EASY.
ZOOMING Use the zoom function for close-up or wide-angle recording. This memory camcorder allows you to record using optical 34x power zoom and 1200x digital zoom. • You can zoom with the Zoom lever or the zoom(W/T) button on the LCD panel. • The further you slide the Zoom lever, the quicker the zoom action. To zoom in • Slide the Zoom lever towards T (telephoto). To zoom out • Slide the Zoom lever towards W (wide-angle).
playback MOVIE IMAGES PLAYBACK You can find a desired movie image quickly using thumbnail index view. 1. Turn the memory camcorder on. • Slide the POWER switch downward to turn on the power.➥page 21 • Set the appropriate storage media :Internal Memory or Memory Card ➥page 32 (SC-MX10A/MX10AU only) (If you want to record on a memory card, insert the memory card.) 2. Open the LCD screen. • Adjust brightness or contrast of the LCD screen.➥page 65 3. Press the MODE button. • Switches to Movie Play mode.
• • • • • • • • • During playback, pressing the Recording start/stop button will move to Movie Record mode. If there is no file stored to view, the message "Empty" appears. When the multi-AV cable is connected to the memory camcorder, the built-in speaker will automatically turn off. Depending on the amount of data to be played back, it may take some time for the playback images to appear. Image data edited on PC or certain types of image data may not be displayed on this memory camcorder.
playback Various Playback Operations Still playback (pause) • Press the OK button during playback. - To resume normal playback, press the OK button again. Search playback or movie • During normal playback, press and hold the Control button ( ) for forward search, or to the left for reverse search. • Moving the Control button to ( / ) repeatedly increases the search speed for each direction.
recording options CHANGING THE MENU SETTINGS You can change the menu settings to customize your memory camcorder. Access the desired menu screen by following the steps below, then change the various settings. 1. Slide POWER switch downward to turn the memory camcorder on. 2. Select the operation mode. • For Movie Record Menus: Press MODE button to set Record ( ). • For Movie Play Menus: Press MODE button to set Play ( ). 3. Press MENU button. • The menu screen appears. 4.
recording options ✪ Follow the instructions below to use each of the menu items listed after this page. For example: setting the White Balance in Movie Record mode. 1. Slide the POWER switch downward to turn the memory camcorder on. 2. Select the operation mode. • For Movie Record Menus: Press MODE button to set Record ( ). 3. Press MENU button. • The menu screen appears. 4. Press the Control button ( / ) to select "White Balance". 5.
MENU ITEMS • Accessible items in menu can vary depending on the operation mode. • For operation details, see the corresponding page.
recording options RECORDING MENU ITEMS You can setup the menu items for movie images recording. Scene Mode (AE) This memory camcorder automatically sets the shutter speed and aperture according to the subject brightness for optimum recording: You can also specify one of five modes depending on subject conditions, recording environment or purpose of filming. item "Auto" contents - Auto balance between the subject and the background. - To be used in normal conditions.
White Balance This memory camcorder automatically adjusts the color of subject. Change the white balance setting depending on the recording conditions. item "Auto" "Daylight" "Cloudy" "Fluorescent " "Tungsten" "Custom WB" on-screen display contents This option is generally used to control the white balance automatically. None This controls the white balance according to the outdoor ambience, especially for close up and when the subject is of one dominant color.
recording options • • • • • • • A subject can be recorded under various types of lighting conditions indoors (natural, fluorescent, candlelight, etc.). Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result. The white balance also can be set in the shortcut menu. ➥page 29. The white balance can not be set use while EASY.Q is in use.
Manual exposure is recommended in situations listed below : • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing. • When the background is overly dark or the subject is bright. • • • The exposure also can be set in the shortcut menu. ➥page 29 EASY.Q mode automatically sets the "Exposure" to "Auto".
recording options Digital Effect • T he digital effect enables you to give a creative look to your recording. • Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. • There are 6 different digital effect options. item "Off" "Black&White" "Sepia " "Negative" "Art" on-screen display contents Disables the function. None Changes the images into Black and White. This mode gives the images a reddish brown pigment.
Focus • The memory camcorder usually focuses on a subject automatically (auto-focus). • You can also manually focus a subject depending on the recording conditions. item "Auto" "Manual" on-screen display contents This memory camcorder automatically focuses a subject at the center of screen (autofocus). When the memory camcorder is turned on, auto-focus will always be set. Manual focusing may be necessary under certain conditions that make automatic focusing difficult or unreliable.
recording options Back Light When subject is lit from behind, this function will compensate for lighting so that the subject is not too dark. item on-screen display contents "Off Disables the function. "On" - Backlight compensation is executed. - Backlight compensation brightens the subject quickly. None Back lighting influences recording when the subject is darker than the background: • The subject is in front of a window. • The subject is against a snowy background.
Digital Zoom is not available in the 16:9 Wide mode. 16:9 Wide You can select the desired LCD display aspect ratio for recording or playback (16:9 Wide/4:3 aspect ratio). item contents on-screen display "Off" Disables the function. Displays the image in 4:3 aspect ratio. Select to use the standard display aspect ratio of 4:3 on the screen. None "On" Select to view movies of 4:3 aspect ratio by enlarging and fitting into 16:9 aspect ratio.
recording options Resolution • You can select the resolution of a movie to be recorded. item contents "720x480i" Resolution of the movie played on a TV screen. "720x480p" Higher resolution of the movie played on a PC screen. "352x240p" Lower resolution of the movie played on a PC screen. • • • on-screen display High resolution images use more memory than lower resolution images. Therefore the higher the resolution selected, the less recording time available.
playback options • You can manage recorded movie images in various ways. • Each thumbnail image shown in the display represents the first frame of a separately recorded movie. SETTING THE PLAY OPTION • You can play all movies continuously or play the selected movie only. • You can also set the repeat option for all movies. 1. Slide the POWER switch downward to turn on the memory camcorder. • Set the appropriate storage media.
playback options DELETING MOVIE IMAGES • You can delete saved movie images. 1. Slide the POWER switch downward to turn on the memory camcorder. • Set the appropriate storage media. (SC-MX10A/MX10AU only) (If you want to record on a memory card, insert the memory card.) 2. Press the MODE button. ➥page 21 • Switches to Movie Play mode. • Select the desired movie thumbnail images, using the Control button. 3. Press the MENU button. 4. Press the Control button ( / ) to select "Delete". 5.
PROTECTING MOVIE IMAGES • You can protect saved important movies from accidental deletion. • Protected movies will not be deleted unless you release the protection or format the memory. 1. Slide the POWER switch downward to turn on the memory camcorder. • Set the appropriate storage media. (SC-MX10A/MX10AU only) (If you want to record on a memory card, insert the memory card.) 2. Press the MODE button. ➥page 21 • Switches to Movie Play mode.
playback options COPYING MOVIE IMAGES (SC-MX10A/MX10AU ONLY) • Movie images are copied to the destination storage while leaving original movie images in the source storage. • It copies from the currently-used memory to another. For example, if the built-in memory was used, it copies to a memory card. 1. Slide the POWER switch downward to turn on the memory camcorder. • Set the appropriate storage media. (SC-MX10A/MX10AU only) 100-0003 (If you want to record on a memory card, insert the memory card.
16:9 WIDE You can select the desired LCD display aspect ratio for recording or playback (16:9 Wide/4:3 aspect ratio). item "Off" "On" contents 120 MIN 100-0004 on-screen display Disables the function. Displays the image in 4:3 aspect ratio. Select to use the standard display aspect ratio of 4:3 on the screen. None Select to view movies of 4:3 aspect ratio by enlarging and fitting into 16:9 aspect ratio.
setting options CHANGING THE MENU SETTINGS IN "SETTINGS" You can change the menu settings to customize your memory camcorder. Access the desired menu screen by following the steps below and change the various settings. 1. Slide POWER switch downward to turn the memory camcorder on. 2. Press MENU button. • The menu screen appears. 3. Select "Settings" with the Control button ( / ), and then press the OK button. • The menus in "Settings" mode will appear. 4.
You can setup the date/time, OSD language and display settings of the memory camcorder. Setting menu items Items Default value Page Date/Time Set 2007/01/01 12:00 AM 64 Date Format YY/MM/DD 64 Time Format 12 Hr 64 Date/Time Off 64 LCD Brightness 40% 65 LCD Color 50% 65 Auto Power Off Off 65 Beep Sound On 66 File No.
setting options Date/Time Set Set the date and time so they can be recorded correctly. ➥page 31 Date Format You can select the date format to display. settings contents "YY/MM/DD" T he date is displayed in the order of year / month / date. "DD/MM/YY" The date is displayed in the order of date / month / year. "MM/DD/YY" The date is displayed in the order of month / date / year. on-screen display - Time Format You can select the time format to display.
LCD Brightness • You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions. • Moving the Control button up will brighten the screen whereas moving it down will darken the screen. • • • • A brighter LCD screen setting consumes more battery power. Adjust the LCD brightness when the ambient lighting is too bright and the monitor is hard to see. LCD Brightness does not affect the brightness of images to be stored. You can adjust the LCD Brightness from 0% to 100%.
setting options Beep Sound You can set the beep sound to on/off. When on, the beep sounds when any operation is performed. settings "Off" "On" contents Disables the function The beep sounds when operate the menu settings, the power is turned on. on-screen display None None File No. File numbers are assigned to movie images in the order they were recorded.
Memory Info It shows you the storage information. You can view the storage media, used memory space and available memory space, and the recordable time according to the quality. settings on-screen display contents It shows you the memory information of built-in "Memory" storage media. (SC-MX10A/MX10AU only ) It shows you the memory information of the inserted "Card" memory card.
setting options Default Set You can initialize the memory camcorder settings to the factory defaults (initial settings at the factory). Initializing the memory camcorder settings to factory defaults does not affect recorded images. After resetting the memory camcorder, set "Date/Time Set". ➥page 31 Version You can see the firmware version information. Language You can select a desired language to display the menu and messages. ➥page 30 USB Connect Connect the memory camcorder to a PC via a USB 2.
USB interface This chapter explains how to connect the camcorder to a PC using the USB cable for various functions. - When connecting a USB cable to a PC, refer to the software installation instructions and PC specifications below. System Requirements Transferring a Digital Image through a USB Connection • The memory camcorder supports USB 2.0 High speed. (Depends on the PC specification) • You can transfer a recorded file in storage media to a PC via a USB connection.
USB interface • O n a slower PC than recommended, movie playback may not be smooth or video editing may take a long time. • On a slower PC than recommended, movie playback may skip frames or operate unexpectedly. • If your OS is Windows 2000/XP/Vista, log in as the Administrator(administrator of the PC) (or a user with the equivalent privileges) to install the software. • Check out the storage media of the memory camcorder before connecting USB cable.
INSTALLING THE SOFTWARE Installing DV Media Pro Program You need to install DV Media Pro to play back recorded movie files or the transferred data from memory camcorder with the USB cable on your PC. When you install the DV Media Pro software on your Windows computer, you can enjoy the following operations by connecting your memory camcorder to your computer via a USB cable. - View movie recordings on PC: DV Driver - DirectX9.0 - Video Codec - PC camera/USB streaming function: DV Driver - DirectX9.
USB interface Application Installation – Quick Time 1. Click "Quick Time" on the setup screen. • QuickTime is Apple's technology for handling movie, sound, animation, graphics, text, music, and even 360-degree virtual reality (VR) scenes. CyberLink Power Director • CyberLink Power Director is software for easily editing MPEG, AVI, and other video files, still images, and other contents for creating a movie.
CONNECTING THE USB CABLE Connect the USB cable to copy movie images from the camcorder to the PC and vice versa. You can use various other functions with USB connection. (as a PC-camera, data storage, etc.) 1. Set the "USB Connect" to "Mass Storage." ➥page 68 2. Connect the memory camcorder to the PC with a USB cable. PC Memory camcorder USB cable • • • Don’t apply excessive force when inserting or extracting a USB cable into/from a USB jack.
USB interface VIEWING THE CONTENTS OF STORAGE MEDIA 1. Slide the POWER switch downward to turn on the memory camcorder. - Select the desired recording medium. ➥page 32 (SC-MX10A/MX10AU only) - Make sure that there is a memory card in the memory camcorder (SC-MX10/MX10P only). 2. Connect the memory camcorder to the PC with a USB cable. ➥page 73 - Check out the USB connection on the LCD monitor. 3. When using Windows® XP,Vista version : - The "Removable Disk" window appears on the PC’s screen after a moment.
• When • 999 folders and 9,999 files are recorded, you cannot record any more. In this case, format your storage media. (memory card, etc.) You may modify the name of a file/folder stored in the memory card using a PC. This memory camcorder may not recognize modified files. TRANSFERRING FILES FROM THE MEMORY CAMCORDER TO YOUR PC You can copy the movie images to your PC. 1. Execute the procedure in "Viewing the contents of storage media." ➥page 74 The folders in the storage media appear. 2.
USB interface USING THE PC CAM FUNCTION You can use your memory camcorder as a PC camera for video chatting, video conference and other PC camera applications. Before you start! For PC Cam use, you must install the DV Driver. ➥page 71 1. Slide the POWER switch downward to turn on the memory camcorder. • The Movie Record mode screen appears. 2. Press the MENU button and select the " Settings". ➥page 62 • The Settings screen appears. 3. Press the Control button ( / ) to select "USB Connect". 4.
connection You can view the recorded movies on a large screen by connecting the memory camcorder to a TV. VIEWING ON TV SCREEN To playback your recordings, the television must be NTSC compatible. ➥ page 80 Connecting to a TV Use the provided multi-AV cable to connect the memory camcorder to a TV as follows: 1. Connect the end of the Multi AV cable with the single plug to the AV jack of the camcorder. 2.
connection RECORDING (DUBBING) IMAGES ON OTHER VIDEO DEVICES You can record (dub) images played back on this memory camcorder, onto other video devices. Use the multi-AV cable(provided) to connect the memory camcorder to another video device as shown in the following figure: 1. Press the MODE button to set Player( ). ➥page 21 2. Choose the recorded (dubbed) movie on the thumbnail view and then press the OK button. 3. Press the record button on the connected device.
maintenance & additional information MAINTENANCE Your memory camcorder is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. ✪ For safekeeping of the memory camcorder, turn off the memory camcorder. - Remove the battery pack and AC power adaptor. ➥page 13 - Remove the memory card.
maintenance & additional information • To clean the LCD monitor Wipe gently with a soft dry cloth. Be careful not to damage the monitor. • To clean the lens Use an optional air blower to blow out dirt and other small object. Do not wipe the lens with cloth or your fingers. If necessary, wipe gently with lens cleaning paper. - Mold may form if the lens is left dirty. - If the lens looks dimmer, turn off the memory camcorder and leave it for about 1 hour.
troubleshooting TROUBLESHOOTING ✪ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Warning indicators and messages Power source Message Low Battery Auto Power Off Informs that... The battery pack is almost discharged. If no button is pressed for about 5 minutes, the memory camcorder is automatically turned off . ("Auto Power Off"). Action Change to a charged one or use AC adaptor.
troubleshooting Storage media Message Informs that... Action Memory Full There is not enough space to record on built-in memory. Delete unnecessary files on the built-in memory. (SC-MX10A/MX10AU) Use a memory card. Insert Card There is no memory card inserted in the card slot. Insert a memory card. Use the built-in memory. (SC-MX10A/MX10AU) Card Full There is not enough space to record on memory card. Delete unnecessary files on the memory card. Use the built-in memory.
CAUTION When there is dew condensation, do not use the camcorder for a while • What is dew condensation? Dew condensation happens when a memory camcorder is moved to a place where there is a significant temperature difference from the previous place. In other words, the water vapor in the air turns into dew because of the temperature difference, and it condensates like dew on the external or internal lenses of the memory camcorder and on the reflection lens.
troubleshooting ✪ If you encounter any problem using your camcorder, check the following before requesting service. If these instructions do not solve your problem, contact the nearest Samsung authorized service center. Symptoms and solutions Power Symptom The power does not turn on. Explanation/Solution • The battery pack may not be installed on your memory camcorder. Insert a battery pack to the memory camcorder. • The inserted battery pack may be discharged.
Displays Symptom Explanation/Solution • All movies recorded with this memory camcorder have 4:3 aspect ratio. - It can occur when recording or viewing a 16:9-ratio image on the LCD The screen of TV or LCD screen screen. For more details, see the display specifications. ➥page 55, 61 displays distorted images. - If you want to display properly on your TV, check out your TV type and set the proper screen mode (4:3 aspect ratio). Unknown image appears on the LCD screen.
troubleshooting Recording Media (Memory card, etc) Symptom Explanation/Solution Memory card functions are not operable. • Insert a memory card into your camcorder properly. ➥page 33 • If you use a memory card formatted on a computer, format it again directly on your camcorder. ➥page 67 Image cannot be deleted. • The recorded images are protected. Remove protection from the files and delete them. ➥page 59 • You cannot delete images protected by another device.
Recording Symptom Pressing the Recording start/stop button does not start recording. Explanation/Solution • Press the MODE button to set Movie Record mode ( ). • There is not enough free space to record on the built-in memory or memory card. • Check if the memory card is write-protected or if SDHC memory card is inserted. • The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a while in a cool place.
troubleshooting Symptom Explanation/Solution When the screen is exposed to direct sunlight during recording, the screen becomes red or black for an instant. • This is not a malfunction. During recording, the date/time does not display. • "Date/Time" is set to "Off". Set the "Date/Time" to "On". ➥page 64 There is a time difference between the point where you press Recording start/stop button and the point where the recorded movie starts/stops.
Adjusting the image during recording Symptom Explanation/Solution Focus does not adjust automatically. • Set "Focus" to "Auto". ➥page 53 • The recording conditions are not suitable for auto focus. Adjust the focus manually. ➥page 53 • The lens is dusty on the surface. Clear the lens and check the focus. • Recording is being made in a dark place. Light up to brighten the place. The image appears too bright or flickering, or changes in color.
troubleshooting Playback on your camcorder Symptom Explanation/Solution Pressing the Play/Pause button does not start playback. • Press the MODE button to set Movie Play mode. ( ) • Image files recorded using other device may not be played on your memory camcorder. • Select a proper recording medium. The Skip or Search function does not work properly. • If the temperature inside the camcorder is too high, it can not function properly.
Connecting/Dubbing with other devices (TV, DVD player, etc) Symptom Explanation/Solution You cannot dub correctly using the multi-AV cable. • The multi-AV cable is not connected properly. Make sure that the multi-AV cable is connected to the proper jack, i.e. to the input jack of the device used for dubbing an image from your camcorder. ➥page 78 Connecting to a computer Symptom The computer does not recognize your camcorder. Cannot play a movie file properly on a PC.
troubleshooting Symptom Explanation/Solution "DV Media Pro" does not function properly. • Exit the "DV Media Pro" program, and restart the Windows computer. The image or sound on your camcorder is not played on your computer properly. • Movie playback or sound may stop temporarily depending on your computer. The movie or sound copied to your computer is not affected. • If your camcorder is connected to a computer that does not support Hi-speed USB(USB2.
specifications Model Name: SC-MX10/SC-MX10p/SC-MX10a/SC-MX10AU Video signal Picture compression format Audio compression format Recording quality Image device Lens Focal Length Minimum Illumination Filter diameter Size/dot number LCD screen method S-Video output Composite video out Audio output USB output System NTSC MPEG4 ASP Format ADPCM Super Fine (about 12Mbps), Fine (about 10Mbps), Normal (about 8Mbps) CCD (Charge Coupled Device) (Max/Effective : 680K/350K pixels) F1.6 to 4.
Warranty SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option. All warranty repairs must be performed by a SEA authorized service center.
contact SAMSUNG world wide If you have any questions or comments relating to Samsung products, please contact the samsung customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center Samsung Electronics America, inc. 1-800-SAMSUNG (726-7864) www.samsung.
