User Manual (ver.1.0)
Table Of Contents
- key features of your memory camcorder
- safety warnings
- important safety instructions
- precautions
- important information on use
- precautions on use
- contents
- quick start guide
- getting to know your memory camcorder
- preparation
- USING THE ACCESSORIES
- CONNECTING A POWER SOURCE
- BUTTON TYPE BATTERY INSTALLATION
- BASIC OPERATION OF YOUR MEMORY CAMCORDER
- LCD SCREEN INDICATORS
- TURNING THE SCREEN INDICATORS ON/OFF
- USING THE LCD ENHANCER
- ADJUSTING THE LCD SCREEN
- USING THE MENU BUTTON
- USING THE CONTROL BUTTONS
- SHORTCUT MENU (OK GUIDE)
- INITIAL SETTING : OSD LANGUAGE & DATE AND TIME
- about the storage media
- recording
- playback
- recording options
- playback options
- setting options
- USB interface
- connection
- maintenance & additional information
- troubleshooting
- specifications
- Warranty
- contact SAMSUNG world wide
English_25
TURNING THE SCREEN INDICATORS ON/OFF (
)
Switching the information display mode
You can switch the display mode of on-screen information:
Press the button.
The full and minimum display modes will alternate.
Full display mode: All types of information will appear.
Minimum display mode: Only operating status indicator will appear.
Checking the remained battery and memory capacity
When the camcorder is turned off (battery is installed) press and release the
button to display the remaining capacity of the battery capacity.
When the camcorder is turned on (battery is installed) press and hold the
button for more than 2-3 seconds to display the remaining
battery capacity.
The approximate recordable time in the selected storage (Internal Memory or
Memory Card) and battery information appear for about 10 seconds.
•
•
•
•
•
•
154 Min
Battery
60 Min
Memory (Super Fine)
120 Min
0% 50% 100%
Remaining battery(approx.)
Recording capacity (approx.)