User Manual (ver.1.0)
Table Of Contents
- key features of your memory camcorder
- safety warnings
- important safety instructions
- precautions
- important information on use
- precautions on use
- contents
- quick start guide
- getting to know your memory camcorder
- preparation
- USING THE ACCESSORIES
- CONNECTING A POWER SOURCE
- BUTTON TYPE BATTERY INSTALLATION
- BASIC OPERATION OF YOUR MEMORY CAMCORDER
- LCD SCREEN INDICATORS
- TURNING THE SCREEN INDICATORS ON/OFF
- USING THE LCD ENHANCER
- ADJUSTING THE LCD SCREEN
- USING THE MENU BUTTON
- USING THE CONTROL BUTTONS
- SHORTCUT MENU (OK GUIDE)
- INITIAL SETTING : OSD LANGUAGE & DATE AND TIME
- about the storage media
- recording
- playback
- recording options
- playback options
- setting options
- USB interface
- connection
- maintenance & additional information
- troubleshooting
- specifications
- Warranty
- contact SAMSUNG world wide
English_35
Handling a memory card
It is recommended that you power off before inserting or removing the memory card to avoid data loss.
It is not guaranteed that you can use a memory card formatted by other devices.
Be sure to format your memory card using this camcorder.
You have to format newly-purchased memory cards or memory cards with data that your camcorder cannot
recognize or are saved by other devices. Note that formatting erases all data on the memory card.
If you cannot use a memory card that has been used with another device, format it with your memory camcorder.
Note that formatting erases all information on the memory card.
A memory card has a certain life span. If you cannot record new data, you have to purchase a new memory card.
Do not bend, drop, or cause a strong impact to your memory card.
Do not use or store in a place that has high temperature and humidity or dusty environment.
Do not place foreign substances on the memory card terminals. Use a soft dry cloth to clean the terminals if required.
Do not paste anything other than exclusive label on label pasting portion.
Be careful to keep memory card out of the reach of children, who might swallow it.
•
•
•
•
•
•
•
•
The memory camcorder supports SDHC and MMCplus memory cards for data storage.
The data storage speed may differ, according to the manufacturer and production system.
- SLC(single level cell) system: faster write speed enabled.
- MLC(multi level cell) system: only lower write speed supported.
The user using a lower write speed memory card for recording a movie may have diffi culties storing the
movie on the memory card. You can even lose your movie data during the recording.
In an attempt to preserve any bit of the recorded movie, the memory camcorder forcibly stores the movie
on the memory card and displays a warning: "Low speed card. Please record at lower quality."
To facilitate movie recording, you are recommended to use a memory card that supports faster write
speed.
If you are unavoidably using a low speed memory card, lower the recording quality by one level
"Fine"
→
"Normal" or decrease the movie size to 352P to reduce the data size.
You can have three quality options to record a movie with the memory camcorder :
"Super Fine", "Fine", "Normal"
You can record the same scene in three quality levels of "Super Fine
"
,
"
Fine
"
,
"
Normal".
However, the better the quality is, the bigger the data size is.
For optimal performance of the memory camcorder, ensure that you purchase a fast speed memory card.
•
•
•
•
•
•
•