SC06H70*0H Series Vacuum Cleaner user manual ✻ Please read the User Manual thoroughly before operating the vacuum. ✻ For indoor use only. English Thank you for purchasing a Samsung product. DJ68-00721J (EN)-00.indd 1 14. 10. 23.
Contents YOUR VACUUM CLEANER 06 BEFORE USING THE VACUUM CLEANER 07 OPERATING CLEANER 10 MAINTENANCE 13 07 Assembly 08 Installing the Dust Sensor (Option) 08 Using accessory 10 10 10 11 12 Power cord Check filter ON/OFF Power control Dust Sensor (Option) 13 Cleaning the dust bin and grille 16 Cleaning the outlet filter 17 Maintain floor tools TROUBLESHOOTING 18 DJ68-00721J (EN)-00.indd 2 14. 10. 23.
Safety information SAFETY INFORMATION WARNING WARNING • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because the following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. CAUTION/WARNING SYMBOLS USED WARNING CAUTION Indicates that a risk of death or serious injury exists. Indicates that a risk of personal injury or material damage exists.
IMPORTANT SAFEGUARDS GENERAL • Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. • WARNING : D o not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water. • Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy.
• • • • • • • Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision. Children should be supervised to ensure that they do not play with the appliance. The plug must be removed from the socket outlet before cleaning or maintaining the appliance. The use of an extension cord is not recommended. If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent.
Your vacuum cleaner Handle Hose Combination accessory Pipe 2-Step brush Cyclone OPTION (Depending on model) * Power Turo Plus * ECO carpet * ECO Hard floor * Parquet master * Cover battery * Dust sensor * 06_ Your vacuum cleaner DJ68-00721J (EN)-00.indd 6 14. 10. 23.
Before using the vacuum cleaner ASSEMBLY Connecting the Hose 02 Before using the vacuum cleaner Connecting the handle and pipe Connecting the brush Before using the vacuum cleaner _07 DJ68-00721J (EN)-00.indd 7 14. 10. 23.
INSTALLING THE DUST SENSOR (OPTION) Assemble the dust sensor between the brush and the pipe between the pipe and the hose USING ACCESSORY Combination accessory (Option) 2 1 Dusting brush Crevice tool 08_ Before using the vacuum cleaner DJ68-00721J (EN)-00.indd 8 14. 10. 23.
Pipe Adjust the length of the pipe by sliding the length control button located in the center of the telescopic pipe. 02 Before using the vacuum cleaner For storage, park the floor nozzle CAUTION Do not pick up a machine while the floor nozzle parked. Before using the vacuum cleaner _09 DJ68-00721J (EN)-00.indd 9 14. 10. 23.
Operating cleaner POWER CORD CAUTION When removing the plug from the electrical outlet, grasp the plug, not the cord. CHECK FILTER ON/OFF The filter light is illuminated when the dust bin or filter requires emptying or cleaning. 10_ Operating cleaner DJ68-00721J (EN)-00.indd 10 14. 10. 23.
POWER CONTROL Hose (controlled by radio frequency signals) Select a higher power 03 Operating cleaner ON/OFF Transmitter Select a lower power • Don’t cover the handle transmitter when you use a handle control. • If no button is pressed for 30 minutes while cleaning, the power will shut off as a precaution. If this happens, press the button on the main unit or replug the power cord in again. Operating cleaner _11 DJ68-00721J (EN)-00.indd 11 14. 10. 23.
DUST SENSOR (OPTION) Dust Sensor Operations • Indicates if dust is being picked up and passing by the sensor which assist the user to clean more efficiently. • The dust sensor is activated automatically when the cleaner runs and is turned off when the cleaner is stopped. Green : Amount of dust passing sensor is small. Red : Amount of dust passing sensor is large. If the red light does not light up when cleaning a dusty location -- Clean the sensors (2EA) with a dry cloth.
Maintenance CLEANING THE DUST BIN AND GRILLE Empty the dust bin, if dust reaches 'MAX' or Check filter ( ) light is illuminating. Push the button aside. Turn the grille and take out it. 04 Maintenance Take the dust bin out by lifting the handle. 1 2 3 4 Maintenance _13 DJ68-00721J (EN)-00.indd 13 14. 10. 23.
Push the button. Separate the dust bin from body. Clean the dust bin and body with water. Leave the dust bin and body in the shade until completely dry. 5 6 7 Install the grille and turn to clockwise. CAUTION 1 2 14_ Maintenance DJ68-00721J (EN)-00.indd 14 14. 10. 23.
CLEANING THE DUST FILTER 1 3 Shake the filter to remove dust, then wash the filter. 04 Maintenance Pull the dust bin cover to open. 2 Remove the filter from the dust bin. 4 Let the filter dry for more than 12 hours. 5 Put the filter into the dust bin. Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. Do not use wet filter. Replace the dust filter if it becomes damaged or deformed.
CLEANING THE OUTLET FILTER 1 2 Take the dust bin out by lifting the handle. 3 Pull out the HEPA Filter. 4 Shake the HEPA Filter to clean. Install the filter and holder in main body. • The filter can be replaced and separated from holder by pulling. • Clean the outlet filter when suction is noticeably reduced continuously or the vacuum cleaner abnormal overheats. Note: HEPA Filters are not washable. Replace filter if cleaning does not resolve the problem.
MAINTAIN FLOOR TOOLS 2-Step Brush 04 Maintenance • Adjust the inlet lever according to the floor surface. Floor Carpet • Remove waste matter completely if the inlet is blocked. Power Turo Plus (Option) 1 2 3 4 1 2 Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matted or tangled hair. Maintenance _17 DJ68-00721J (EN)-00.indd 17 14. 10. 23.
Troubleshooting PROBLEM SOLUTION Motor does not start. • Check cable, plug and socket. • Leave to cool. Suction force is gradually decreasing. • Check for blockage and remove. In operation, the vacuum cleaner stops • Please unclog the intake. after repeating runs and stops three times. Cord does not rewind fully. • Pull the cord out 2-3 m and push down the cord rewind button. Vacuum cleaner does not pick up dirt. • Check hose and replace if required. Low or decreasing suction.
Product fiche [English] According to Commission Regulation (EU) No 665/2013 and No 666/2013 A Supplier B Model Samsung Electronics., Co.
DJ68-00721J-00 DJ68-00721J (EN)-00.indd 20 14. 10. 23.