Use & care guide

2. Replacing Refrigerator Door
I_ Right Door
• Lower the door onto the middle hinge pin (6).
• Make sure the door is aligned with the
cabinet.
• Replace the top hinge (5) by rotating the lever
hinge (4) counter clockwise to secure it.
• Make sure the gasket on the door is flush
against the cabinet and is not folded.
• Support the door on the handle side while
securing. Make sure the door is straight and
the gap between the doors is even across the
front.
• Install the ground screw (3) and connect the
wire harness (2).
• Tighten the cover screw (1).
Jl
I_ Left Door
• To replace the left door, follow the same
directions discribed above.
• When replacing the top hinge (5), rotate the
lever hinge (4) clockwise.
NOTE: Make sure that the washers [part (7)] is
in place on the middle hinges before installing
the doors.
14