User Manual
Table of Contents In the Box 3 Quick Start Instructions 3 Getting Started iDevices Connected App Battery Replacement Powering On & Off Connecting Mounting Probe Use Probe Wrap Use 4 Using the iGrillmini Smart LED Proximity Sensor Custom & Preset Alarms Renaming Probes Timer Tool Globe Tool Graph Tool 9 4 4 5 5 6 7 8 9 9 10 11 11 12 12 Problem Solving 13 Frequently Asked Questions 15 Disclaimer 15 Regulations 15
In the Box Inside your iGrillmini box, you will find: • 1 iGrillmini • 1 Coin Cell Battery (Installed) • 1 Meat Probe • 1 Colored Probe Indicator • 1 Probe Wrap • 1 Optional Magnetic Disc • Quick Start Guide Quick Start Instructions 3 • Download the iDevices Connected app from the App StoreSM and launch it from your iPhone® (4S and later), iPad® (3rd generation and later), iPad mini™ (all generations), or iPod touch® (5th generation and later).
• Open the iDevices Connected app to connect to your iGrillmini. Tap on the iDevices logo in the gray toolbar at the top of the app. Select your iGrillmini from the device manager. • You are ready to use your iGrillmini! Getting Started iDevices Connected App The iDevices Connected app provides all of the functionality and customization you’ll need to get the most out of your iGrillmini.
• Ensure the battery is in place and replace the battery door. Powering On & Off To turn on the iGrillmini, follow these steps: • Press the power button located at the center of the faceplate. • The Smart LED will blink blue while waiting for pairing. To turn off the iGrillmini, follow these steps: • Press and hold down the power button located in the center of the faceplate for three seconds. • The Smart LED will illuminate solid white and will then turn off.
• Select your iGrillmini from the device manager. You will then be sent a pairing request. Once you accept, your smart device will pair with the iGrillmini and you are ready to configure your settings and start cooking! To connect an additional iGrillmini (or other iDevices product) to your iPhone, iPad or iPod touch follow these steps: • While turned on, place your iGrillmini (or other iDevices product) next to your smart device and open the iDevices Connected app.
The magnetic base is not designed to withstand high heat and it must be placed on a cool surface. If the surface is too hot to touch, it is too hot for the iGrillmini base! Probe Use • Meat Probe Acceptable Temperature Range: -22°F to 572°F (-30ºC to 300ºC) • Pro Meat Probe and Pro Ambient Temperature Probe Acceptable Temperature Range (sold on iDevicesinc.
Be sure to avoid water exposure to the probes’ wiring as well as the area where the probes’ wiring meets the probe. The probe is not waterproof and damage may result from water exposure. The probe should never be submersed in water. Temperatures below -22°F or above 572°F (-30ºC or above 300ºC) will not display in the iDevices Connected app and will cause the probe to disappear from connection.
Using the iGrillmini Smart LED The Smart LED allows the iGrillmini to display the connected probe temperature reading through the use of color.
Custom & Preset Alarms Manage iPhone, iPad or iPod touch alarms: If you are having issues hearing the alarms from the iDevices Connected app, try these steps. • Open Settings on your smart device • Tap “Notification Center” • Choose the iDevices Connected app and make sure to enable notifications, including “Sounds” and “Alerts”. Make sure the volume setting for your phone is properly set. If your sounds are off or set at a low setting, you may not hear the alarm properly.
• Name your preset • Set temperature(s) • Tap “Save” Your custom preset will be saved in the “My Peak Presets” and “My Range Presets” sections of the alarm screen. The iDevices Connected app will not display temperatures below -22° (-30ºC) or above 572°F (300ºC). When your target temperature has been reached, the iGrillmini will blink red and the iDevices Connected app alarm will alert you with a notification.
• Add a timer title • Set desired time length using scroll wheels • Tap “Save” in the top right corner of the app. Start the timer by sliding it on in the Timers menu. Globe Tool The globe tool will show other users of the iDevices Connected app. Tapping on a pin will display a user-posted message and picture*. Take a look at what other cooks around the world have made to ignite ideas for your next cooking adventure! * You will only show up on the Globe if you share via Facebook.
Problem Solving The following information covers some of the most common troubleshooting issues with the iGrillmini. If you need further assistance, please review the iGrillmini FAQ page at idevicesinc.com/support or contact a member of our Customer Support Team at support@idevicesinc.com. My iGrillmini won’t turn on. If your iGrillmini is brand new, please be sure to remove the plastic tab located in the battery compartment so that the battery can come into contact with the power terminals.
• Replace the battery cover, ensuring the battery is in place. • Power up your smart device and turn Bluetooth back on. • Tap on the iDevices logo in the gray toolbar at the top of the app. Select your iGrillmini from the device manager. Your smart device will pair with the iGrillmini and you are ready to configure your settings and start cooking! If you do not see the iGrillmini in your Bluetooth® settings, please ensure that you are using the iDevices Connected app.
Frequently Asked Questions I don’t have a device with which to pair my iGrillmini, can I still use it? No, the iGrillmini does not have a screen to display its temperature readings and requires the use of the iDevices Connected app and a compatible Bluetooth Smart device. I’m frozen on my home screen when I attempt to enter the iDevices Connected app. Go to your iPhone, iPad or iPod touch home screen and double-click your home button.
must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
