DJ68-00273A(EN)-0.1 10/27/04 11:45 AM Page 1 Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully. ❈ For indoor use only.
DJ68-00273A(EN)-0.1 10/27/04 11:45 AM Page 2 1 ASSEMBLING THE CLEANER ▼ OPTION Features may vary according to model. For storage, park the floor nozzle.
DJ68-00273A(EN)-0.1 10/27/04 11:45 AM Page 3 2 OPERATING YOUR CLEANER 2-1 POWER CORD NOTE When removing the plug from the socket, please take care to grasp the plug, not the cord in order to avoid undue stress. 2-2 ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : ON/OFF switch is combined with POWER CONTROLLER - To start or stop the unit just lightly press it downward.
DJ68-00273A(EN)-0.1 10/27/04 11:45 AM Page 4 2-4 USING FLOOR TOOLS CREVICE Carpets DUSTING Bare floors UPHOLSTERY OPTION - Cut off pet hairs or threads surrounding brush by using scissors. - Transparent tube OPTION 3 CHECK FILTER INDICATOR When the light is illuminated, check the Cassette Filter and clean it. OPTIONAL (Dust Bag type) Check the Dust bag and change it.
DJ68-00273A(EN)-0.1 10/27/04 11:45 AM Page 5 4 MAINTAINING THE CASSETTE FILTER 4-1 EMPTYING THE CASSETTE FILTER(Optional) 1 2 3 6 5 4 • Ensure completely dry before replacing. • Allow 12 hours for it to dry. 7 • Brush the Filter media with water until the stuck fine dust is removed.
DJ68-00273A(EN)-0.1 10/27/04 11:46 AM Page 6 4-2 CHANGING THE DUST BAG (Optional) 1 2 3 VP-95B TYPE OPTIONAL ● FOR CLOTH FILTER BAG After using, if the cloth bag is full of dust, clean the cloth filter bag and use it again. 5 CLEANING THE CYCLONE FILTER (Optional) 1 2 3 4 5 6 7 8 NOTE It is necessary to use Cyclone Filter while cleaning.
DJ68-00273A(EN)-0.1 10/27/04 11:46 AM Page 7 6 CLEANING THE INLET FILTER 1 2 3 NOTE : Do not allow the filter to become clogged as this may cause power reduction or may damage the motor. 7 OUTLET FILTER 1 2 - IF YOU HAVE A PROBLEM PROBLEM Motor does not start. CAUSE REMEDY 0 No power supply. Thermal cut-out. Nozzle, suction hose or tube is blocked. Check cable, plug and socket. Leave to cool. Remove the object and empty/wash cassette filter as required. Cord does not rewind fully.
DJ68-00273A(EN)-0.1 10/27/04 11:46 AM Page 8 IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water. 3. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy.