Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.
safety information SAFETY INFORMATION • B efore operating the appliance, please read this manual thoroughly and retain it for your reference. • B ecause these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. WARNING WARNING CAUTION/WARNING SYMBOLS USED WARNING CAUTION Indicates that a danger of death or serious injury exists.
safety information IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING : Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water. 3. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy.
contents assembling the cleaner 05 Assembling the Cleaner operating the cleaner 06 06 Power cord Power control maintain tools and filter 08 09 11 12 14 14 Using accessory Maintain floor tools Emptying the dust bin Cleaning the dust pack Cleaning the motor protection filter Cleaning the outlet filter 15 Change the battery 05 06 08 troubleshooting 16 4_ contents
assembling the cleaner • P lease do not press the button of dust bin handle when carrying machine. • F or storage, park the floor nozzle.
operating the cleaner POWER CORD CAUTION • When removing the plug from the electrical outlet, grasp the plug, not the cord. power control Remote-control type (Infrared control) - HOSE sender 1. Vacuum cleaner ON/OFF( ) Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner. 2. Vacuum cleaner (+, -) Press the (+) button to operate the vacuum to high suction power. Press the (-) button to operate the vacuum to low suction power.
- BODY Press the power control button repeatedly to select the correct mode. (ON(MAX) ➞ OFF) The ON/OFF button operates the vacuum cleanner or stops it. The IR light indicates the part that receives the infra-red signal from the handle control. The filter light is illuminated when the dust pack requires checking or emptying. An audio signal will also sound. Body-control type - HOSE To reduce suction for cleaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open.
maintain tools and filter using accessory Accessory • Push the accessory on to the end of the hose handle. • To use the dusting tool, push the accessory on to the end of the hose handle. • To use the upholstery tool, push the accessory on to the end of the hose handle. Pipe • Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. • To check for blockages, separate the telescopic pipe and adjust to shorten.
maintain tools and filter MAINTAIN FLOOR TOOLS Elbow Extending Tube (Option) 1 2 3 4 5 3 Way Brush (Option) Carpet Cleaning Floor Cleaning • Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked. 2-Step Brush (Option) Carpet Cleaning Floor Cleaning • Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked. Parquet Master Brush (Option) • Vacuum dust in wide area at once.
maintain tools and filter Parquet Brush (Option) • Vacuum dust in wide area at once. • R emove waste matter completely if the inlet is blocked. Blanket Brush(Option) 1 2 Turbine For picking up pet hair and fibre on upholstery and bed linen. 3 Brush 1. Remove waste matter completely when inlet is blocked. 2. Turn the lock button to ( ), and remove. 3. To reassemble, align the cover to the front of the main body and close.
Power Pet Plus Brush (Option) 2 3 4 5 6 Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. 1. Push the Open button of the transparent screen cover to separate the cover. 2. Remove the brushbar from the transparent screen. 3. Remove waste matter such as dust and hair tangled around the brushbar using scissors. 4. Remove dust inside the brush housing using a dry duster or crevice tool. 5.
maintain tools and filter - Empty into a plastic bag. (recommended for asthma/allergy sufferers) You may rinse the dust bin with cold water. When emptying any vacuum cleaner it is difficult to avoid exposure to dust. To minimize this risk, Please ensure that you encase the dust pot in a large bag to empty it and close the bag as tightly as possible round the pot. Remove the pot and close the bag as tightly and quickly as possible and dispose of this immediately.
CLEANING THE DUST PACK 2 3 Remove the dust bin and dust pack as shown. Remove the fixed frame of the dust pack cover. Remove the sponge and filter from the dust pack. 4 5 6 Wash the sponge and the filter of the dust pack with water. Let the sponge and filter dry in the shade for more than 12 hours. Put the sponge and filter into the dust pack. 7 8 Before reassembly, align the dust pack cover and dust pack correctly. Put the assembled dust pack into the main body.
maintain tools and filter CLEANING THE MOTOR PROTECTION FILTER • Take out both the dust bin and the dust pack. • R emove the motor protection filter from the main body. Shake and tap the dust from it and put back in machine. CLEANING THE OUTLET FILTER 1 2 3 Remove the dust bin and HEPA Filter as shown. Clean the HEPA Filter. Let the HEPA Filter dry in the shade for more than12 hours. 4 Put assemble HEPA Filter into the main body.
maintain tools and filter chANGE ThE bATTERY (OPTION) CAUTION 1. Never disassemble or recharge the batteries. 2. Never heat up the batteries or throw them into fire. 3. Do not reverse (+), (-) poles. 4. Dispose of the batteries property. BATTERY TYPE : AAA Size maintain tools and filter _15 03 maintain tools and filter 1. W hen the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer. 2. Use 2 batteries of size AAA.
troubleshooting PROBLEM SOLUTION Motor does not start • Check cable, pulg and socket. • Leave to cool. Suction force is gradually decreasing • Check for blockage and remove. Cord does not rewind fully • Pull the cord out 2-3m and push down the cord rewind button. Vacuum cleaner does not pick up dirt • Check hose and replace if required. Low or decreasing suction • Please check filter and, if required, clean as illustrated in the instructions.