SC8800 series Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register DJ68-00597G (EN)-0.0.indd 1 2011.4.
safety information SAFETY INFORMATION WARNING WARNING • Before operating the appliance, please read this manual thoroughly and retain it for your reference. • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. CAUTION/WARNING SYMBOLS USED WARNING CAUTION Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists.
safety information IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING : D o not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water. 3. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy.
contents assembling the cleaner 05 Assembling the Cleaner operating the cleaner 06 06 06 Power cord On/Off switch Power control maintain tools and filter 08 09 11 12 14 Using accessory Maintain floor tools Emptying the dust bin Cleaning the dust pack Cleaning the outlet filter 14 Change the battery (optional) 05 06 08 troubleshooting 15 4_ contents DJ68-00597G (EN)-0.0.indd 4 2011.4.
assembling the cleaner OPTION 01 ASSEMBLING THE CLEANER • Please do not push the button of dust bin handle when carrying machine. • For storage, park the floor nozzle. assembling the cleaner _5 DJ68-00597G (EN)-0.0.indd 5 2011.4.
operating the cleaner POWER CORD CAUTION • When removing the plug from the electrical outlet, grasp the plug, not the cord. on/off switch power control REMOTE-CONTROL TYPE (INFRARED CONTROL) (OPTIONAL) - HOSE 1. Vacuum cleaner ON/OFF( ) Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner. 2. Vacuum cleaner (+, -) Press the (+) button to operate the vacuum to high suction power. Press the (-) button to operate the vacuum to low suction power.
- BODY Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner. (OFF → ON → OFF) 1 3 2 1 The ON/OFF button operates the vacuum cleanner or stops it. 2 The INFRARED light indicates the part that receives the infra-red signal from the handle control. 3 The filter light is illuminated when the dust pack requires checking or emptying. An audio signal will also sound.
maintain tools and filter using accessory PIPE • A djust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. • T o check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube. ACCESSORY (OPTIONAL) • P ush the accessory on to the end of the hose handle. • P ull out and turn the dusting brush for cleaning delicate areas.
MAINTAIN FLOOR TOOLS 2-STEP BRUSH (OPTION) 03 MAINTAIN TOOLS AND FILTER Carpet Cleaning Floor Cleaning • Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked. POWER PET PLUS BRUSH (OPTION) For improved pickup of pet hair and fibre on carpets. 1 2 3 4 5 6 Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. 1.
maintain tools and filter PET BRUSH (OPTION) For improved pick-up of pet hair and fibre on carpets. Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. BLANKET BRUSH (OPTION) Clogs on turbine keep brush from turning, thus need to be unclogged as follows. For picking up pet hair and fibre on upholstery and bed linen. Remove waste matter completely when inlet is blocked.
emptying the dust bin 1 2 3 Separate the dust bin cover. 4 5 6 Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the “click” sound. Throw the dust away in the bin. 03 MAINTAIN TOOLS AND FILTER Once dust reaches the dust Take the dust bin out by full mark, empty the dust bin. pushing the button. - Empty into a plastic bag. (recommended for asthma/allergy sufferers) You may rinse the dust bin with cold water only.
maintain tools and filter CLEANING THE DUST PACK WHEN TO CLEAN THE DUST PACK • The lamp will turn red when suction is reduced. If the light comes on, please clean the dust pack. • Turn the vacuum power to ‘MAX’. ON(MAX) � OFF Body Control Handle Control • I f the filter check indicator turns red with the inlet floating 10cm above flat floor, clean the dust pack. When suction is noticeably reduced continuously or vacuum cleaner abnormally overheats, please clean the dust pack.
CLEANING THE DUST PACK 2 3 Remove the dust bin. Separate the dust bin cover. Remove the fixed frame of the dust pack cover. 4 5 6 Separate the dust pack. Remove the sponge and filter from the dust pack. Wash the sponge and the filter of the dust pack with water. 7 8 9 Let the sponge and filter dry in the shade for more than 12 hours. Put the sponge and filter into the dust pack. Put the assembled dust pack into the cover.
maintain tools and filter CLEANING THE OUTLET FILTER 1 2 Press the fixed frame part at the back of the main body to remove. Remove the dust bin and HEPA Filter as shown. • When suction is noticeably reduced continuously or vacuum cleaner abnormally overheats, please clean the outlet filter. Note. Do not wash HEPA filter. If cleaning does not resolve the problem Please replace blocked out filter. • Replacement filters are available at your local Samsung distributor.
troubleshooting PROBLEM Motor does not start SOLUTION • Check cable, pulg and socket. • Leave to cool. Cord does not rewind fully • Pull the cord out 2-3m and push down the cord rewind button. Vacuum cleaner does not • Check hose and replace if required. pick up dirt Low or decreasing suction • Please check filter and, if required, clean as illustrated in the instructions. if filters are out of condition change them to new ones.
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site AUSTRALIA 1300 362 603 www.samsung.com/au HONG KONG 3698 4698 www.samsung.com/hk MALAYSIA 1800-88-9999 www.samsung.com/my SINGAPORE 1800-SAMSUNG (7267864) www.samsung.com/sg Code No. DJ68-00597G REV(0.0) DJ68-00597G (EN)-0.0.indd 16 2011.4.
