Super High ResolutionCamera User Manual SCB-2002 SCB-2002PH
B T ■ ■ Super High ResolutionCamera User Manual Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
safety information 6 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
e e 7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric shock. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way.
safety information im FCC STATEMENT 1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 2 3 4 5 6 7 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
o e 1. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
contents i INTRODUCTION 9 CONNECTION 18 9 10 11 15 Features What’s included Component names and functions Lens 18 18 20 20 Connecting to a monitor Connecting to power Control via RS-485 Interface Using coaxial communications 22 22 Menu Configuration Menu Setup F y y y CAMERA OPERATION 22 TROUBLESHOOTING y 38 Troubleshooting 39 Specifications y 38 SPECIFICATIONS 39 y y y y y 8_ contents
s introduction FEATURES y Excellent Sensitivity The built-in high sensitivity COLOR CCD produces a clear image. - SCB-2002 COLOR : 0.1 Lux(50IRE,@F1.2), B/W : 0.01 Lux(50IRE,@F1.2) - SCB-2002H COLOR : 0.1 Lux(50IRE,@F1.2), B/W : 0.01 Lux(50IRE,@F1.2) y Motion Detection Without assistance from an external sensor, this camera independently detects and traces objects while examining movement to activate the alarm.
introduction y Miscellaneous Functions HLC(High Light Compensation), SENS-UP, REVERSE , D-ZOOM, SHARPNESS and PRIVACY functions are provided. y Communication Coaxial and RS-485 communication methods are supported. - Coaxial Communications : Pelco Coaxitron - RS-485 Communications : Samsung-T, Samsung-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD y OSD The camera’s OSD is complimented by 18 languages.
FRONT VIEW ● INTRODUCTION D COMPONENT NAMES AND FUNCTIONS ❶ Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. ➋ C-Mount Lens Adapter Install this adapter to use a C-Mount Lens. ➌ Back Focus Control Lever Adjust focus by this Back Focus Lever. SIDE VIEW ➍ Auto Iris Lens Connector Used to connect Auto Iris Lens plug.
introduction BOTTOM VIEW ※ Cannot fasten screws here. ※ When fastening the screw, make the screw fastening part head to the camera module. ➎ Tripod Mounting Bracket Screw Hole Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows: L 1/4”-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197” (ASA standard) * You can separate the Tripod Mounting Bracket and install it on the top or bottom of the camera.
REAR VIEW ⓫ ⓬ ➏ ⓮ ➐ ⓯ ➑ ➒ ❿ ⓰ ● INTRODUCTION ⓭ * High Voltage Type (SCB-2002PH) ➏ Function Setup Button: • SET button : Displays the menu on the screen and uses enter sub menu. • Up&Down button : Used to move the cursor up or down in the menu screen. • Left&Right button :Used to move the cursor left or right in the menu screen. ➐ RS-485 Control Port : You can control SETUP MENU through this port by using external controllers like a Remote controller that RS-485 Communication is supported.
introduction ⓫ D & N Input Port : You can switch to Day & Night Mode by connecting an external signal to this port. ⓬ MD Output Port : Motion detection signals are output through this port. ⓭ Ground Terminal ⓮ Video OUT Terminal : Sends video signal and connects to the video input terminal of the monitor. ⓯ Power LED : This lamp is lit when the camera is receiving power normally. ⓰ Power input terminal : Connects to the power appropriate to each model.
LENS The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used. Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers. WHEN USING AUTO IRIS LENS 1. Strip the insulation of the auto iris lens cable 8mm from the end. approx. 8mm 2.
introduction 4. Fit the cover of the auto iris lens connector plug, remove the protective glass cover from the front of the camera, and fasten the auto iris lens by turning it clockwise. 5. Set focus of camera using Back Focus Control Lever of camera side after combining Auto Iris lens. Back Focus Control Lever WHEN USING A C/CS-MOUNT LENS Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount. This camera is set for a CS-Mount Lens by default.
2. Turn the C-Mount lens clockwise to install it. 3. Set focus of camera using Back Focus Control Lever of camera side after combining C-Mount lens. M Use the lens connector shown in the following figure. If the dimensions of the connector are not correct, it may damage the camera, or the lens may not be installed firmly. If the lens is too heavy, the camera becomes unbalanced and there may be problems. Use a lens that weighs less than 450g.
connection CONNECTING TO A MONITOR Connect the Video OUT port on the rear panel of the camera to a monitor. y W CCD Camera Monitor C y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off. y CONNECTING TO POWER Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power.
High Voltage Type (AC230V, 50Hz) y Use AC230V, 50Hz power source For SCB-2002PH. ● CONNECTION When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm2) #22 (0.33mm2) #20 (0.52mm2) #18 (0.83mm2) Resistance value( /m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer.
connection CONTROL VIA RS-485 INTERFACE The camera can be controlled by using external controllers like a Remote controller. (RS-485 Communication) (1) To control by PC Connect the RS-485 control port of the camera and the serial cable through an RS-485 converter. Example) PC Serial Port (COM1) Serial Cable RS-485 Converter Camera RS-485Control Port.
DVR ALARM HDD NETWORK BACKUP REC REC 1 DVD RECORDER 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 OPEN/CLOSE ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW MODE AUDIO ALRAM PRESET MENU USB RETURN MENU PRESET MON 2 7 GROUP PTZ 3 8 DVR 4 9 MTX 5 SETUP ESC TRACK FUNC ENTER CLOSE OPEN 0 NEAR WIDE FAR TELE : BNC • • ---- : RS-485 - Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and
camera operation MENU CONFIGURATION MAIN SETUP LENS ● DC ● VIDEO ● MANUAL EXPOSURE ● BRIGHTNESS ● SENS-UP ● SHUTTER ● RETURN ● AGC SSDR ● ON ● OFF WHITE BAL ● ATW ● MANUAL ● OUTDOOR ● AWC→SET ● INDOOR BACKLIGHT ● OFF ● USER BLC ● HLC SSNR3 ● ON ● OFF DAY/NIGHT ● AUTO ● B/W ● EXTERN ● COLOR SPECIAL ● IMAGE ADJ ● MOTION DET ● PROFILE ● CAM TITLE ● PRIVACY ● COMM ADJ ● SYNC ● DIS ● RETURN EXIT ● SAVE ● NOT SAVE ● RESET MENU SETUP Use the Function Setup button within the camera
MAIN SETUP 䯝 1. LENS 2. EXPOSURE 3. SSDR 4. WHITE BAL 5. BACKLIGHT 6. SSNR3 7. DAY/NIGHT 8. SPECIAL 9. EXIT DC Change the status by moving the setup switch left or right. OFF ATW OFF ON AUTO SAVE 2. Select a desired function using the Function Setup button. y Place the cursor over a desired item. 3. Set up a selected item by using The Function Setup button. 4. To finish the setting, select ‘EXIT’ and press The set button. M An item with the icon also has sub menus.
camera operation - FOCUS ADJ (DC, VIDEO) : To adjust the DC and VIDEO lens focus correctly, you must activate the Focus Settings mode under each lens menu. To activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode. (The VIDEO lens requires an extra step: go to the sub menu of the Focus Settings mode and change the shutter speed to adjust the lens brightness.) - IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens.
s d g 1/60(1/50) 1/120(1/100) 1/250 1/500 1/700 1/1000 1/1600 1/2500 AV he ss SHUTTER 1 OFF ON OFF ON OFF ON OFF ON SHUTTER 2 OFF OFF ON ON OFF OFF ON ON SHUTTER 3 OFF OFF OFF OFF ON ON ON ON [ Interlace Mode] - --- : Shutter speed is fixed at 1/60 sec (1/50 sec). M When you use a DC lens, set the shutter mode to --- if color rolling occurs.
camera operation y SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated. - OFF : Deactivates the SENS-UP function. - AUTO : Activates the SENS-UP function. M If you set the Function Setup switch to ‘AUTO’ mode, You can adjust the brightness by increasing or decreasing the limit value.
an he o Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup button so that the arrow indicates ‘White Bal’. 2. Select a desired mode using the Function Setup button. MAIN SETUP 1. LENS 2. EXPOSURE 3. SSDR 䯝 4. WHITE BAL 5. BACKLIGHT DC OFF ATW OFF ※ Select one of the following 5 modes, as appropriate for your purpose. y ATW : Select this when the color temperature is between 1,700°K and 11,000°K.
camera operation 2. Select a desired mode using the Function Setup button depending on the camera purpose. y OFF : Not being used. y USER BLC : Enables a user to select a desired area on a picture and view that area more clearly. - LEVEL : Adjusts the brightness level of a monitoring area. - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. y HlC (High light Compensation) : This function masks the strong light to HLC SETUP minimize white out due to over exposure 䯝 1.
You can display pictures in color or in black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup button so that the arrow indicates ‘DAY/NIGHT’. 2. Select a desired mode using the Function Setup button according to the picture display you want. MAIN SETUP 1. LENS 2. EXPOSURE 3. SSDR 4. WHITE BAL 5. BACKLIGHT 6. SSNR3 䯝 7. DAY/NIGHT 8. SPECIAL 9.
camera operation M When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. If the GAIN of EXPOSURE menu is set to OFF, AUTO mode is not available to select. When using an external input, Connect the D & N Input Port to the Ground Terminal. SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2.
LCD MONITOR ▶ GAMMA 0.55 IIIIIÂIIIIIIIIIIIIIIII 14 PED LEVEL IIIIIIIIIIIIIIIÂIIIIII COLOR GAIN 5 RESET Press SET to Return y Reverse :You can reverse the picture. - OFF : You don’t reverse the picture. - H-REV : You can flip the picture horizontally on the screen. - V-REV : You can flip the picture vertically on the screen. - HV-REV : You can flip the picture horizontally and vertically on the screen.
camera operation y CAM TITLE : If you enter a title, the title will appear on the monitor. ➊ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’. ➋ Set it to ‘ON’ by using the Function Setup switch. ➌ Press the Function Setup switch. ➍ Use the Function Setup switch to move to a desired letter and select the letter by pressing the switch. Repeat this to enter multiple letters. You can enter up to 15 letters.
➋ You can select a desired phase from 0 to 359 when select ‘phase’. - EXTERN : The camera can use the external power source frequency for the synchronization. Regardless of the input voltage the EXTERN MODE is available only when an external trigger signal input into camera. M When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the LL type synchronization. When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
camera operation ► AREA : You can select up to 4 areas. ► MODE : Determines whether to use the area selected in the AREA. ► TOP / BOTTOM / LEFT / RIGHT : Adjust the size and position of the selected area. ► RETURN : Select this to save the MASK AREA menu settings and return to the MOTION DET menu. MASK AREA 䯝 1.AREA 2.MODE 3.TOP 4.BOTTOM 5.LEFT 6.RIGHT 7.
M As the DIS function uses the digital zoom the camera’s resolution will decrease. DIS doesn’t operate when background illumination is too low. DIS doesn’t operate when object pattern is monotonic as like sky or white wall. y PROFILE : ➊ When the SETUP menu screen is displayed, select ‘PROFILE’ by using the Functfon Setup button so that the arrow fndicates ‘PROFILE’. ➋ Select a desired mode using the Function Setup button according to the picture display you want. SPECIAL 1. IMAGE ADJ 2.
camera operation y COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device. ➊ When the SPECIAL menu screen is displayed, press the set button so that the arrow indicates ‘COMM ADJ’. ➋ Set up the mode using the Function Setup button. - CAM ID : Determines the camera’s identification number (between 0 and 255). - BAUD RATE : You can select 2400/4800/ 9600/19200/38400/57600 bps.
EXIT . Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. y NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. y RESET: Resets the camera settings to the factory defaults. Language and Monitor settings are not initialized. e D) y English_37 ● CAMERA OPERATION y SAVE : Save the current settings and exit the MAIN SETUP menu.
troubleshooting s TROUBLESHOOTING S If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from. Problems Nothing appears on the screen. V Troubleshooting y Check that the power cord and line connection between the camera and monitor are properly connected. y Check that you have properly connected BNC cable to the camera. y Check the type of lens. The image on the screen is dim.
specifications SPECIFICATIONS Item SCB-2002N SCB-2002P SCB-2002PH 1/3” Super HAD CCD II Total Pixels 1020(H) x 508(V) 1020(H) X 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Scanning System 2:1 Interlace / Progressive Synchronization Internal / Line lock / Extern Frequency H:15.734KHz / V:59.94Hz Horizontal Resolution Color : 650 TV lines. B/W : 700 TV lines Min. Illumination ● SPECIFICATIONS Video Imaging Device H : 15.625KHz / V : 50Hz Color : 0.1Lux @ F1.2, 0.
Item SCB-2002N SCB-2002P SCB-2002PH Motion Detection Built-in Privacy Masking Off / On (12 programmable zones) Sens-up (Frame Integration) 2x ~ 512x Gain Control Off / Low / High White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K) Electronic Shutter Speed 1/60 ~ 1/120,000 sec Digital Zoom Off / On (1x ~ 16x) Reverse Off / H-Rev / V-Rev / HV-Rev Profile Basic, Day & Night, Backlight, ITS, Indoor, User PIP Off / On Alarm NONE Communication Coaxial Control ( SPC-
t.
MEMO
MEMO
MEMO
MEMO
MEMO
MEMO
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.