Operation Manual

24_ camera operation
camera operation
FOCUS ADJ (DC, VIDEO) : To adjust the DC and VIDEO lens focus correctly,
you must activate the Focus Settings mode under each lens menu. To activate
the Focus Settings mode, adjust the lens focus, and then deactivate the settings
mode. (The VIDEO lens requires an extra step: go to the sub menu of the Focus
Settings mode and change the shutter speed to adjust the lens brightness.)
IRIS SPEED (DC) : Adjusts the Iris control speed of the DC lens. If the control speed
is too slow or fast, please use this menu to adjust the speed.
When using VIDEO lens, adjust the lens VR explained below fi rst and set the focus using
‘FOCUS ADJ’ menu.
If color rolling occurs when using a DC lens, set Shutter to ---.
Some lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL.
When Using a Video-Type Auto Iris Lens
➊ Adjust the ALC adjustment terminal on the lens appropriately. In general, set it to AV
(Average).
➋ It may not work properly depending on the installed lens. Set the Level VR of the lens to the
optimal value.
➌ Set AGC to OFF and adjust the Lens VR to an appropriate brightness.
➍ Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen brightness
changes properly. Otherwise, adjust the Lens VR again.
EXPOSURE
When the SETUP menu screen is displayed,
select ‘EXPOSURE’ by using the Function
Setup button so that the arrow indicates
‘EXPOSURE’.
Select a desired mode using the Function
Setup button.
BRIGHTNESS : Adjusts the video
brightness.
SHUTTER : You can select the shutter.
ESC : Select this to control the shutter
speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
-
-
M




1.
2.
y
y
-
MAIN SETUP
1. LENS DC
䯝 2. EXPOSURE
3. SSDR OFF
EXPOSURE SETUP
䯝 1.
BRIGHTNESS
IIIII
Â
IIIIIIIIIIIIIIII
25
2.SHUTTER
---
3.AGC HIGH
4.SENS-UP OFF
5.RETURN