Supreme Resolution WDR Camera SCB-3000/3001 User Guide Before installing and operating this product, please read this manual thoroughly.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.
r el The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Contents Contents • Features ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ • Precautions ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ • Components and Accessories ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ • Overview ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Front View ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Side View ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Bottom View ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Rear View ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ • Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Lens ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Features SSDR (Samsung Super Dynamic Range) High Resolution By adopting a diagonal 6mm(1/3") 520K pixel(NTSC), 610K pixel(PAL) Color Double Density CCD (SCB-3001), 410K pixel(NTSC), 470K pixel(PAL) Color Double Density CCD (SCB-3000), the camera produces clear picture quality with a horizontal resolution of 650 TV lines(SCB-3001), 600TV lines(SCB-3000) in color and 700TV lines in B/W.
Features Video/DC Drive Lens Support Communication Coaxial and RS-485 communication methods are supported. - Coaxial Communications : Pelco Coaxitron - RS-485 Communications : Samsung-T, Samsung-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD You can select Video or DC Drive Lens from the menu. DIS (Digital Image Stabilizer) The DIS function compensates for any camera movement, to produce more stable pictures. OSD The camera’s OSD is complimented by 19 languages.
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Warnings & Cautions This information is provided to ensure your safety and to prevent any losses, financial or otherwise.
Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment. Use only under temperature conditions between -10ºC and +50ºC. Provide good ventilation when using in high temperature conditions. May lower image quality. ➊ ➌ Do not install under unstable lighting conditions. Avoid touching the camera lens. Severe lighting changes or flickering may hinder normal camera operation. The lens is the most important component of the camera.
Components and Accessories ➊ ➋ ➌ ➍ ➊ Supreme Resolution WDR Camera SCB-3000/3001 ➌ Auto Iris Lens Connector Plug ➋ Instruction Manual ➍ C-Mount Adapter Overview e h Front View ❶ ➋ ➌ ➊ Tripod Mounting Bracket Screw Hole Used to fix the Tripod Mounting Bracket to the top of the camera. ➋ C-Mount Lens Adapter Install this adapter to use a C-Mount Lens. ➌ Back Focus Control Lever Adjust focus by this Back Focus Lever.
Overview ➎ Side View ➍ *Y t ➍ Auto Iris Lens Connector Used to connect Auto Iris Lens plug.
➎ Tripod Mounting Bracket Screw Hole Used to fix the camera on a bracket or tripod. The screw sizes for this hole are as follows: 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) *You can separate the Tripod Mounting Bracket and install it on the top or bottom of the camera. Make sure to use the Tripod Mounting Bracket when fixing the camera to a bracket or tripod. Otherwise the camera may not be secure, or the internal circuitry of the camera may be damaged.
Overview ⓫ Rear View ⓬ ⓭ ⓮ ⓫⓬⓭ ⓮ ➏ ⓯ ⓰ ⓯ ➐ ➑ ➒ ❿ ö ⓰ *High Voltage Type (SCB-3000/30001PH) ➏ Function Setup Button • SET button : Displays the menu on the screen and uses enter sub menu. • Up & Down button : Used to move the cursor up or down in the menu screen. • Left & Right button : Used to move the cursor left or right in the menu screen.
⓫ D & N Input Port : You can switch to Day & Night Mode by connecting an external signal to this port. ⓬ MD Output Port : Motion detection signals are output through this port. ⓭ Ground Terminal ⓮ Video OUT Terminal : Sends video signal and connects to the video input terminal of the monitor. ⓯ Power LED : This lamp is lit when the camera is receiving power normally. ⓰ Power input terminal : Connects to the power appropriate to each model.
Installation Lens 4 The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. Notes • To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used. • Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers. 5 When Using Auto Iris Lens 1. Strip the insulation of the auto iris lens cable 8mm from the end. 2.
4. Fit the cover of the auto iris lens connector plug, remove the protective glass cover from the front of the camera, and fasten the auto iris lens by turning it clockwise. 5. Set focus of camera using Back Focus Control Lever of camera side after combining Auto Iris lens. Back Focus Control Lever When Using a C/CS-Mount lens Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount. This camera is set for a CS-Mount Lens by default.
Installation • When Using a C Mount Lens 1. Remove the protective glass cover at the front of this product and turn the C-Mount Adapter clockwise to install it. C-mount adapter C CCD protection cap 2. Turn the C-Mount lens clockwise to install it. CS-mount adapter • • 3. Set focus of camera using Back Focus Control Lever of camera side after combining C-Mount lens. Notes • Use the lens connector shown in the following figure.
ap Connecting to Monitor Connect the Video OUT port on the rear panel of the camera to a monitor. CCD Camera Monitor er • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. • Only connect the cable when the power is turned off. Connecting to Power Since power specifications differ depending on the model, make sure to check your model name and specifications before connecting power. You can connect power as shown in the following figure.
Installation When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) 2 2 * 2 2 #24(0.22mm ) #22(0.33mm ) #20(0.52mm ) #18(0.83mm ) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 • As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
* RS-485 Communication establishment initial value Item Initial value Camera ID 1 BAUD RATE 9600 UART MODE 8-NONE-1 RET PKT ENABLE Notes • To control the camera by constructing an additional controller, use the SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE and AD protocol.
Installation Notes • It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable. U Operating Your Camera 1.
Menu Setup Use the Function Setup button within the camera. UP button SET button LEFT button DOWN button RIGHT button 1. Press the Function Setup button. • Main SETUP menu is displayed on the monitor screen. Select the function using the Function Setup button. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR3 ON 6.DAY/NIGHT AUTO 7.PROFILE BASIC 8.SPECIAL 9.EXIT SAVE Change the status using the Function Setup button. 2. Select a desired function using the Function Setup button.
Operating Your Camera Notes • An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the Function Setup button. • An item with the --- icon is unavailable due to function settings. LENS Using this function, you can control the screen brightness. 1. When the SETUP menu screen is displayed, selectÌLENSÍby using the Function Setup button so that the arrow indicates ÌLENSÍ . 2. Select the connected lens type by using the Function Setup button. MAIN SETUP 1.
Notes p • When using VIDEO lens, adjust the lens VR explained below first and set the focus using 'FOCUS ADJ' menu. • If color rolling occurs when using a DC lens, set Shutter to ---. • Some lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL. • When Using a Video-Type Auto Iris Lens ❶ Adjust the ALC adjustment terminal on the lens appropriately. In general, set it to AV (Average). ➋ It may not work properly depending on the installed lens.
Operating Your Camera - MANUAL : You can control shutter speed manually. (NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL - 1/50sec~1/ 120,000sec) - A.FLK : Select this when you experience picture flicker, this happen when there is a clash with the installed lighting frequency. - EXTERN : Use the Shutter Speed Select Terminal on the back of the camera to control the shutter speed via an external input.
s d - LOW : Allows automatic gain control from 5.3dB to 32dB. - HIGH : Allows automatic gain control from 5.3dB to 37dB. SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated. - OFF : Deactivates the SENS-UP function. - AUTO : Activates the SENS-UP function. Notes • If you set the Function Setup button to ‘AUTO’ mode, You can adjust the brightness by increasing or decreasing the shutter speed.
Operating Your Camera INDOOR MANUAL : Select this when the color temperature is between 4,500˚K and 8,500˚K. : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode. After that button to MANUAL mode, fine-tune the White Balance and the Function Setup button. AWC ĄSET : To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup button.
HLC (High Light Compensation) : If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. - LEVEL : Adjusts the brightness level of a monitoring area. - LIMIT : Enable to change the operating condition. - MASK COLOR/TONE : Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta) - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
Operating Your Camera - LEVEL : Adjust the WDR Brightness by controlling the bar from 1 to 100. - MODE : Indoor and outdoor backlight conditions are appropriately selected. - ANTI ROLLING : Rolling caused around a fluorescent lamp is improved. 3. Select a desired mode using the Function Setup button. BLC : Adjust the area to be enhanced HLC : Enable the user to change the level, then adjust the level. limit, mask color/tone and area. S SDR : Enable the user to change the level.
SSNR3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup button so that the arrow indicates ‘SSNR3’. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR3 DC ATW OFF ON e 2. Select a desired mode using the Function Setup button. ON : Activates SSNR3 so that noise is reduced. OFF : Deactivates SSNR3. Noise is not reduced. 3.
Operating Your Camera DAY/NIGHT You can display pictures in color or in black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup button so that the arrow indicates ‘DAY/NIGHT’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.BACKLIGHT OFF 5.SSNR3 ON 6.DAY/NIGHT AUTO 1 2. Select a desired mode using the Function Setup button according to the picture display you want.
mode ress COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. Notes • When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching between Color and Black & White may not occur. • When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as selecting 'COLOR' mode and 'AUTO' mode cannot be selected.
Operating Your Camera INDOOR : It will be set automatically to help you take a picture in a regular indoor lighting condition. USER : Automatically configures the camera to your custom settings. ˙ Select Custom for Simple Setup mode. ˚ Configure the menu options to your custom settings. ˛ The settings are automatically saved as Custom mode. ˜ Profile user mode don't initialize when menu resets. 2 3. In the PROFILE menu, you can confi gure the following camera settings at once.
or 2. Select a desired mode using the Function Setup button. 1. 2. 3. 4. 5. 6. 7. 8. 9. SPECIAL IMAGE ADJ CAM TITLE OFF SYNC INT INTELLIGENCE OFF PRIVACY OFF DIS OFF COMM ADJ LANGUAGE ENGLISH RETURN IMAGE ADJ : 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup button so that the arrow indicates ‘IMAGE ADJ’. 2) Select a desired mode using the Function Setup button. IMAGE SETUP 1.MONITOR LCD 2.VPS OFF 3.REVERSE OFF 4.PIP OFF OFF 5.D-ZOOM 6.
Operating Your Camera ÂCRT : Please select this menu item when using a CRT monitor. You can change the PED level, color gain in the sub menus. ÂUSER : Please use this menu item when using a monitor other than standard ones. You can change the gamma, PED level and color gain in the sub menus. ú VPS(Virtual Progressive Scan) : This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet.
Notes • When the V-REV or H-REV mode is enabled, the text on the screen does not flip. • If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear. CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Function Setup button so that the arrow indicates ‘CAM TITLE’. CAMERA TITLE SETUP 2) Set it to ‘ON’ by using the Function Setup ABCDEFGHIJKLM button.
Operating Your Camera SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL) frequency, you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator. ÂINT : Internal Synchronization Type ÂL/L : Power Synchronization Type, Line-lock ˙ Press the Function Setup button. ˚ You can select a desired phase from 0 to 359 when select 'phase'.
úMOTION : Select motion types to detect. ÂOFF : Not being used. ÂDETECTION : Since the camera detects motion without any additional external sensor, you can monitor activity more efficient. ÂTRACKING : Commands the camera to detect and trace a moving object. ĶFENCE : You can select up to 4 FENCE. ĶMODE : Determines whether to use the fence selected in the FENCE. ĶTYPE : Two types, line and area, of fences are available.
Operating Your Camera ÂFIXED/MOVED : Detects an object that emerges or disappears from the screen, or stays onscreen without movement. Notes •A detection (FIXED/MOVED) error may occur if : · multiple motions occur continuously in random directions · a fi xed object moves in one position continuously · a second object screens the fi rst moving object ú DETECT BOX : Outlines an object on the screen in a box when its movement matches a custom Motion Type.
or Ķ RETURN : Select this to save the MASK AREA menu settings and return to the INTELLIGENCE menu. ú SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the lower level, the more sensitive. ú DETECT SIZE : Selects an object size to detect on the screen. When you adjust higher levels, the more larger size. ú RETURN : Select this to save the INTELLIGENCE menu settings and return to the SPECIAL menu. PRIVACY : Mask an area you want to hide on the screen. PRIVACY AREA SETUP 1.
Operating Your Camera Notes • As the DIS function uses the digital zoom, the camera's resolution will decrease. • DIS doesn’t operate when background illumination is too low. • DIS doesn’t operate when object pattern is monotonic as like sky or white wall. COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device.
* Initial value of communication adjustment Item Initial value Camera ID 1 BAUD RATE 9600 UART MODE 8-NONE-1 PET PKT ENABLE LANGUAGE : You can select the menu language according to your requirements. RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu. EXIT Select a desired EXIT mode using the Function Setup button depending on the camera purpose. SAVE : Save the current settings and exit the MAIN SETUP menu.
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. úNothing appears on the screen. Ķ Check that the power cord and line connection between the camera and monitor are properly connected. Ķ Check that you have properly connected BNC cable to the camera. Ķ Check the type of lens. úThe image on the screen is dim.
Specifications SCB-3001N SCB-3001P SCB-3001PH SCB-3000N SCB-3000P SCB-3000PH Video Imaging Device 1/3” Double Scan CCD Total Pixels 1,028(H) x 508(V) 1,028(H) x 596(V) 1,028(H) x 508(V) 1,028(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) 976(H) x 494(V) 976(H) x 582(V) Scanning System 2 : 1 Interlace Synchronization Internal / Line-Lock / Extern Frequency H : 15.734KHz H : 15.625KHz V : 59.94Hz V : 50Hz Horizontal Resolution H : 15.734KHz H : 15.625KHz V : 59.
Specifications SCB-3001N SCB-3001P SCB-3001PH SCB-3000N SCB-3000P SCB-3000PH Digital Noise Reduction SSNRⅢ (Off / On) Digital Image Stabilization Off / On M C D (W Motion Detection Built-in W Privacy Masking Off / On (12 programmable zones) Sens-up (Frame 2x ~ 512x Integration) Gain Control ö Off / Low / High White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°) Electronic Shutter Speed 1/60 ~ 1/50 ~ 1/120,000 sec 1/120,000 sec Digital Zoom Off / On (1x ~ 16x) 1/60 ~ 1/5
SCB-3001N SCB-3001P SCB-3001PH SCB-3000N SCB-3000P SCB-3000PH H Mechanical Color / Material Black, Silver / Aluminum, Steel Dimension (WxHxD) 66 x 61 x 102mm 66 x 61 x 115mm 66 x 61 x 102mm 66 x 61 x 115mm Weight 310g 540g 310g 540g ö The specification for this product may change without prior notice for product improvement.
DECLARATION OF CONFORMITY Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SCB-3000/3001P Beginning Serial NO.
MEMO s COLOR CCD CAMERA 47 User Guide
SALES NETWORK • SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL: +82-70-7147-8740~60 FAX: +82-31-8018-3745 • SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com • SAMSUNG TECHWIN EUROPE LTD.