Operation Manual

English_11
● INTRODUCTION


❶

Used to x the camera on a bracket.
The screw sizes for this hole are as follows.
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard), or 0.197"
(ASA standard)
2
 It acquires margins for lens adjustments.
3
IInstall this if you use the lens.
4
Used to connect Auto Iris Lens plug.
Auto shutter adaptor, c-mount adaptor and supporting board are not provided with the camera.
Please check the installed documentation of tripod for the installation of cameras.

M

1
4
3
2