Operation Manual

English_13
● INTRODUCTION

The lens is not supplied with this camera. Purchase a lens suitable for your environment.
This camera accepts the auto iris lens and both C-and CS-mount lens.
To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used.
Keep the lens surface clean, if it becomes contaminated with dirt or ngerprints the picture quality suffers.

Strip the insulation of the auto iris lens cable 8mm from the end.
approx. 8mm
Strip the insulation of the core of the auto iris lens cable to expose a 2mm
length.
approx. 2mm
Remove the cover of the auto iris lens connector plug and solder the lens cable
to the connector pin of the plug.
LENS
Pin No. DC VIDEO
No.1 Pin Damping - Red (power)
No.2 Pin Damping + NC
No.3 Pin Drive + White (video signal)
No.4 Pin Drive - Black (GND)
M


1.
2.
3.
No.3 Pin
No.1 Pin
Connector
Lens cable
No.4 Pin
No.2 Pin