Operation Manual

English_31
● CAMERA OPERATION
SENSITIVITY : Set the sensitivity to tampering detection.
ALARM OUT : Outputting of detection signals can be set.
EXTERNAL : Send signals through external terminals.
OSD : Display signals on the screen.
RETURN : Return to the TAMPERING menu.
RETURN : Return to the VIDEO ANALYTICS menu.
In the following cases, the initially set tampering detection function can malfunction.
- In a monitoring environment with a simple background or an environment with low light level or at
night, the detection performance can deteriorate.
-
Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
- If camera tampering is detected, after some time(five sec), stabilization will be done before
restarting. During stabilization, there is no detection.
MOTION : This product
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
DET. SIZE : Selects an object
size to detect on
the screen.
DET. AREA : Set the areas of
motion detection.
SEL AREA : Select from four
areas that users
want.
MODE : Determine whether to
use the selected area.
SENSITIVITY : Set the sensitivity of the motion detection. When you adjust
the higher level, the more sensitive.
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
RETURN : Return to the MOTION DET menu.






M

-







MOTION DET
▶ 1. DET. SIZE
2. DET. AREA
3.
NON DET. AREA
4. INDICATOR OFF
5. ALARM OUT
6. RETURN
MOTION DETECT AREA
▶ 1. SEL AREA AREA1
2. MODE ON
3. SENSITIVITY
----

----
5
4. TOP

--------
1
5. BOTTOM
--------

100
6. LEFT

--------
1
7. RIGHT
--------

100
8. RETURN