Operation Manual
English_13
● INTRODUCTION
❺
You can switch to Day & Night Mode by connecting an external
signal to this port.
❻
Motion detection signals are output through this port.
❼
❽
Sends video signal and connects to the video input terminal of the monitor.
❾
This lamp is lit when the camera is receiving power normally.
❿
Connect the power as specied.
⓫
※
External I / O port configuration
Num Name I/O Direction
1 RS-485+ I/O
2 RS-485- I/O
3 Freeze I
4 NC -
5-7 Shutter I
8 DN I
9 MD O
10 GND -
When using the FREEZE Mode Setting Terminal, the Shutter Speed Select Terminal and the D & N
Input Port, Connect each of the terminals to the GND.
M