00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 44 Super WDR & Low Light Digital Color Camera SCC-833(P) SCC-835(P) SCC-803P/805P Operating Instructions Part No.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 1 Operating Instructions Contents 1. Introduction ..................................................... 2 2. Features ........................................................... 3 3. Installation ...................................................... 5 Precautions in Installation and Use ...................... 5 Connecting Auto Iris Lens Connector ................. 6 Mounting lens .........................................................
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 2 Operating Instructions 1. Overview Operating Instructions 2. Features Adopting the latest Super-HAD CCD (Charge Coupled Device), the CCTV COLOR CAMERA SCC-833(P)/835(P)/803P/805P are monitoring camera which can provide the best monitoring function when connected to the CCTV system equipment by realizing SWDR (Super Wide Dynamic Range) and low illumination function.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 4 Operating Instructions Digital Line-lock The control and reliability has been enhanced due to the Full Digital Line Lock, which allows users to adjust the Line Sync Phase. Resolution High resolution is realized due to the Full Digital Image Processing utilizing the best Digital Signal Technology. Output Signal Selection Video output signal reverse function and frame setting (horizontal, vertical) function are incorporated.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 6 Operating Instructions Connecting Auto Iris Lens Connector Prepare the Auto Iris Lens Connector, which is supplied along with the camera. Rib Pin3 Pin1 Operating Instructions Mounting the Lens Loosen a screw fixing the Flange Back Adjustment Ring by turning it counterclockwise and turn the Adjustment Ring to the “C” direction (counterclockwise) until it stops.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 8 Operating Instructions Setting Lens Selection Switch When lens mounting is completed, set the Lens Selection Switch on the lateral side of the camera according to the type of lens mounted. When the mounted lens is an Auto Iris Lens of DC control type, set the Lens Selection Switch to “DC”. When the mounted lens is an Auto Iris Lens of video control type, set the Lens Selection Switch to “VIDEO”.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 10 Operating Instructions The following describes how to adjust the Back Focus when using a Zoom Lens. 1) Lightly loosen up the screw fixing the Back Focus Adjustment Ring using a screwdriver. 2) Image a vivid subject (with check patterns) at a distance of 3 to 5 meters away and adjust the zoom of the lens to TELE as far as it goes. Then adjust the Focus Ring of the lens to obtain the clearest image of the subject.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 12 Operating Instructions 4) Connect the power input cord to the AC 230V power source. (SCC-803P/805P) 220 110 3) Then connect the power adapter. As for SCC-833/P, 835/P, connect one end of two lines of the power adapter using a screwdriver to the Power In Terminal of the camera as shown below. * Connect to the AC 24V or DC 12V power source, without the distinction of the polarity.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 14 Operating Instructions 4. Names and Functions of Parts Operating Instructions Note: When the surface of the camera lens is contaminated, wipe the surface gently with a tissue for lens or a cotton cloth applied with ethanol.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 16 Operating Instructions Operating Instructions 1) Power Indication LED While the power is properly supplied to the camera, the LED is turned on. • Rear Panel SCC-803P/805P 5 6 2) VIDEO Output Terminal This is a terminal to be connected to the Input Terminal of the monitor and others. Through this terminal, video signal is output.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 18 Operating Instructions 5) Camera Control Switch Operating Instructions Camera Setup Setup menu is configured as follows: 1 2 4 3 CAMERA ID OFF/ON--- ON--Write an ID/Select the position SENSE UP OFF/FIX X2~32/ AUTO X2~32 ALC--WDR OFF/AUTO/ON--(Adjust Level) SHUTTER OFF~100K Adjust Iris ALC/ELC ALC---/ELC--- ELC--Adjust LEVEL S E T U P BLC OFF/ON--- ON--AREA POSITION--(Adjust Position) PRESET OFF/ON M E N U WHITE BAL.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 20 Operating Instructions Operation of the Setup Menu Press the Setup Switch for two to three seconds to switch from the general mode to the Setup Mode. Then the Setup Menu pops up on the screen.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 22 Operating Instructions (SET UP) CAMERA ID SENSE UP ALC/ELC BLC AGC WHITE BAL SYNC VIDEO CON MOTION DET EXIT ON--OFF ALC--OFF ON ATW INT FIX OFF QUIT? Operating Instructions A total of 12 characters can be entered. Move the character cursor to the position you want using the up/down/right/left direction switch and then press the Setup Switch. Repeat this until you have the text you want.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 24 Operating Instructions (SET UP) CAMERA ID SENSE UP ALC/ELC BLC AGC WHITE BAL SYNC VIDEO CON MOTION DET EXIT OFF AUTO X12 ALC--OFF ON ATW INT FIX OFF QUIT? Functions are as follows: First, sense up mode is not operated when it is “Off”. Off means 1/60 for NTSC and 1/50 for PAL. In Fix Mode, designated scale mode is not operated in any condition.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 26 Operating Instructions (ALC) WDR LEVEL (0) SHUTTER IRIS (0) ON----- ---------- ---- Operating Instructions – Setting the Shutter Speed First, move the cursor to the “SHUTTER” and select the Shutter Speed (16phases “OFF ~ 100K”) using the right/left direction switch.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 28 Operating Instructions – IRIS Setting Move the cursor to “IRIS” and adjust the relevant data using right/left direction switch. Iris value of the DC lens is determined by the selected data. (For Video lens, the iris value is determined by the data value only when the BLC motion is set “ON”.) (2) Setting ELC Menu First, select ELC on ALC/ELC Menu and select the LEVEL. Target level can be adjusted using the right/left direction switch.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 30 Operating Instructions 5) AGC MODE Move the cursor to “AGC” and select “ON/OFF” using the right/left direction switch. (SET UP) CAMERA ID SENSE UP ALC/ELC BLC AGC WHITE BAL SYNC VIDEO CON MOTION DET EXIT OFF OFF ALC--OFF ON ATW INT FIX OFF QUIT? When it is set “OFF”, the camera set the AGC gain DATA to “0”. When it is set “ON”, AGC is operated.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 32 Operating Instructions - When “PRESET 3200K” is set, each Red and Blue comes out in 3200°K. - When “PRESET 5600K” is set, each RED and Blue comes out in 5600°K. Operating Instructions 7) SYNC MODE Move the cursor to “SYNC” and select the “Power Sync (LINE---)/Internal Sync (INT)” using right/left direction switch.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 34 Operating Instructions - Move the selection cursor of the LINE LOCK MENU to “V-PHASE” and adjust the line lock of the camera by using right/left direction switch. (LINE LOCK) V-PHASE (00) RET ---- ---- 8) VIDEO CON MODE Move the cursor to “VIDEO CON” and select the “FIX/MANU---” using right/left direction switch. When “FIX” is selected, the conditions at the time of shipment are set.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 36 Operating Instructions – Setting H-REV (refer to the diagram below) Move the cursor to “H-REV” and select “ON/ OFF” using the right/left selection switch. When “OFF” is selected, video signal is output normally. When “ON” is selected, video signal is output in right/left reverse. – Setting V-REV (refer to the diagram below) Move the cursor to “V-REV” and select “ON/ OFF” using the right/left selection switch.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 38 Operating Instructions – Setting the LEVEL Move the cursor to “LEVEL” and choose MOTION DETECTION LEVEL within the selected range using the right/left selection switch. (MOTION DETECT) AREA SET--PRESET LEVEL (0) OFF Operating Instructions 5. Product Specifications SCC-833 / 835 Item Details Product Type Monitoring Camera Broadcasting System NTSC STANDARD SYSTEM CCD 833: 1/3 " IT type S-HAD CCD 835: 1/2 " IT type S-HAD CCD No.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 40 Operating Instructions Operating Instructions SCC-833P/835P/803P/805P Details Item Details Shutter Setting OFF ~ 1/100K seconds (16 steps) Product Type Monitoring Camera Motion Det.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 42 Operating Instructions Operating Instructions RS-485 Remote Control This is RS-485 Protocol about keys of SCC-833. Target Address is able to change in sub menu of OFF ~ 1/100K seconds (16 steps) Motion Det. Motion detection (Alarm Out) ID Setting Up to 12 characters (location setting) Color Temperature Setting ATW/AWC/MANUAL MODE (3200°K, 5600°K, R/B Gain adjustment) Signal Output COMPOSITE VIDEO OUT: 1.
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 44 Super WDR & Low Light Digital Color Camera SCC-833(P) SCC-835(P) SCC-803P/805P Operating Instructions Part No.