00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 1 ANTI-VANDAL DOME CAMERA SCC-931T(P) User’s Manual GB Bedienungsanleitung D Guide de l’utilisateur F Guía del Usuario Manuale d’uso Es I
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 2 Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 4 Table of Contents Chapter 1 Chapter 2 Chapter 3 SCC-931T(P) Overview 5 SCC-931T(P) Introduction SCC-931T(P) Part Names and Functions 6 7 Installing SCC-931T(P) 9 Checking the Contents of the Package Precautions for Installation and Use Preparing Cables Installing SCC-931T(P) Connecting Cables and Checking Operations 10 12 14 15 22 Setup Menu Overview 24 Structure of the Setup Menu CAMERA MENU Organization CAMERA ID IRIS AUTO FOCUS SHUTTER AGC/MO
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 6 SCC-931T(P) Introduction The SCC-931T(P) Anti-Vandal Dome Camera is a dome-typed surveillance device that offers the best features of surveillance for banks, retail stores, commercial buildings, industrial settings, and etc. It is designed to withstand intentional or accidental impact or vandalism, and is waterproof, dustproof, and shockproof.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 8 SCC-931T(P) Part Names and Functions ❶ Camera Operation Switches (Setup Switches) The functions of the camera operation switches change depending on whether the SCC-931T(P) is currently in the usual operation mode (i.e., the setup menu is not showing on the screen) or the setup menu mode. ➻ In the usual operation mode - [UP/DOWN] Directional keys: The [UP] key is used as the ZOOM TELE switch, and the [DOWN] key is used as the ZOOM WIDE switch.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 10 Before Installation Checking the Contents of the Package Be sure to check that the following items are included in the package. ✔ PLASTIC ANCHOR 2 ea. ❙ for ceiling installation ✔ ASSY SCREW TAPPING 2 ea. ❙ for ceiling installation (TH M4 X L30 BLK + 0 RING) Us er’s SCC-931T(P) Gu ide User’s Guide ✔ ASSY SCREW MACHINE 2 ea.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 12 Before Installation Precautions for Installation and Use SCC-931T(P) - Installation Examples ✔ Please check whether the installation site can sufficiently support the weight of the SCC-931T(P) before installation. ✔ It can be directly installed on ceilings. ✔ It can be directly installed on pipes coming down from the ceiling. ✔ Make sure that the cable is not caught on anything or its insulation sheath is not removed.
9/25/02 12:30 PM Page 14 Installing SCC-931T(P) Power Adapter Cable The power adapter that plugs into the SCC-931T(P)’s power input receptacle has the rated voltage of DC 12V 600mA or AC 24V 300mA. Video Cable The cable that connects the video output terminal of the SCC-931T(P) to the monitor is a BNC cable. For installing directly on a ceiling 1. Choose an installation site that can sufficiently support the weight of the equipments to be installed. 2.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 16 Installing SCC-931T(P) For installing on a pipe 6. Adjust the LENS direction. 1) Turn the STOPPER RING counter-clockwise as shown in the illustration to move the LENS body and COVER LENS. 2) Move the LENS body to adjust the vertical direction and turn the LENS body together with the COVER LENS to adjust the horizontal direction. (There is a stopping mechanism on the COVER LENS so that the LENS cannot be turned more than 180° degrees to either left or right.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 18 Installing SCC-931T(P) 5) Remove the CAMERA body from the CASE. (Completely separate the power cable from the video cable.) 6) Disconnect the power and video cables from the PCB and arrange them so that they can be passed through the PIPE assembly hole on the side of the CASE as shown in the illustration. 18 ➠ ➠ ➠ SAM SUNG 3) ➜ 1.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 20 Installing SCC-931T(P) 7) Route the cables through the PIPE assembly hole on the side of the PIPE, align the INDEX KEY arrow mark ( ) of the CAMERA body to the groove on the CAMERA, mount the CAMERA body and turn it clockwise all the way tight, and then fasten the two SCREWS.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 22 Connecting Cables and Checking Operations 1. First connect one end of the BNC cable to the VIDEO OUT. 2. Next, connect the other end of the BNC cable to the video input terminal of the monitor. 4. Decide on the type of power source you want to use and then adjust the power selection switch located at the bottom of the power adapter. Then, plug the power adapter into the power receptacle. 5.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 24 Structure of the Setup Menu CAMERA ID SETUP CAMERA ID ON.../OFF Chapter 3 IRIS ALC.../MANU... Setup Menu Overview ON... CAMERA ID POSITION SETUP ALC... AUTOFOCUS AF/ONEAF/MF AREA SETUP BLC SETUP LEVEL SETUP LEVEL SETUP MENU... SHUTTER OFF/1/100~1/10K OFF/AUTO X2~X128 OFF/FIX X2~X128 This chapter looks into the overall organization of the setup menus and explains their functions. AGC ON/OFF SETUP MOTION S.SLOW~F.FAST WHITE BAL ATW/AWC/MENU...
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 26 CAMERA MENU Organization ➼ CAMERA ID If you set the IRIS to ALC and press the [ENTER] key, a submenu screen where you can set the video output level and BLC will be displayed. In the LEVEL item, you can use the [LEFT/RIGHT] keys to set the video output level. If you set the BLC menu to ON, the BLC function will be applied to the screen area specified in the AREA menu.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 28 CAMERA MENU Organization SIZE SIZE Using the [LEFT, RIGHT, TOP, BOTTOM] keys POSITION AUTO FOCUS In the AUTO FOCUS menu, you can specify the Focus method. You can set the Focus to ONEAF, AF, or MF. ➼ POSITION While the area is not flashing, you can specify the size of the area by pressing the [LEFT, RIGHT, TOP, BOTTOM] keys.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 30 CAMERA MENU Organization SHUTTER AGC/MOTION In the SHUTTER menu, you can specify the speeds of the high-speed electronic shutter, AUTO low-speed shutter, and FIX low-speed shutter. The high-speed electronic shutter supports 7 shutter speeds from 1/100 seconds to 1/10K seconds, and the AUTO low-speed shutter and the FIX low-speed shutter support 12 shutter speeds from 2x to 128x respectively.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 32 CAMERA MENU Organization When the SHUTTER is set to the low illumination mode in the setup MEUN, use the UP/DOWN keys to position the cursor to the MOTION and use the [LEFT/RIGHT] keys to execute the MOTION function. Use the LEFT key move toward the SLOW, the RIGHT key to move toward the FAST. CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT OFF... ALC... AF AUTO X8 NORM ATW INT ...
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 34 CAMERA MENU Organization ➼ SYNC Select INT when using the interal synchronization. LINE... is necessary when synchronizing the camera phases to operate multiple cameras by using the external signal (AC signal -60Hz(NTSC), AC signal -50Hz(PAL)). You can adjust the PHASE to eliminate any phase deviation between each CAMERA set. CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT OFF... ALC... AF AUTO X8 F.FAST ATW INT ...
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 36 CAMERA MENU Organization CAMERA ID IRIS AUTO FOCUS SHUTTER MOTION WHITE BAL SYNC SPECIAL MOTION DET EXIT OFF... ALC... AF AUTO X8 F.FAST ATW INT ... OFF QUIT When you press the [ENTER] key CTRL TYPE RS485 PRESET D-ZOOM PIP MIRROR POSI/NEGA ZOOM SPEED DETAIL (0) ----|-RET --... ... OFF --OFF + 3 To activate each function, use the [LEFT], [RIGHT] keys to set the desired item. You can store up to 10 Zoom and Focus positions with the PRESET.
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 38 CAMERA MENU Organization MOTION DET You can set the MOTION detection sensitivity and the MOTION detection area. The MOTION DET fuction detects moving objects and can be used to detect intruders’ movements during off-hours. You can move the cursor to the SENSITIVITY position and use the [LEFT/RIGHT] keys to set the sensitivity for MOTION detection (LOW, MEDIUM, HIGH).
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 40 External Connector Pin Specifications SCC-931T(P) - Product Specifications CN 753 : Camera Power Input and Video Signal Output ITEM Pin No Pin Specifications 5 5 4 3 2 1 4 3 2 1 Video Signal Output GND Camera Power Input Camera Power Input CN 654 : RS485 Control and Alarm Output 4 Gray 3 2 1 Yellow 3 2 1 40 Power Consumption Broadcast System Imaging Device Effective Pixel Scanning Method Pin No Pin Specifications 4 3 2 1 RS485-A(CAM) RS485-B
00326A SCC-931T(P)-eng 9/25/02 12:30 PM Page 42 SCC-931T(P) - Product Specifications ITEM Back Light Compensation Sense Up Digital Zoom Motion Detection Video Control Signal Output Lens Remote Control DESCRIPTION Off/On (Area Setting) Off/Auto 2x~28x/Fix 2x~128x Off/On(x10), PIP Off/On (Area/Sensitivity Setting) POSI/NEGA, MIRROR, Detail Setting Composite Video Out : 1.0 Vp-p 75 ohms/BNC Focal length : 3.6 ~ 43.2 mm Aperture : F1.8(Wide), F2.