SCD-1080_ENG.indd High Resolution Day & Night Dome Camera User Manual SCD-1080P/1080PD Please read the operation manual carefullly before use..
SCD-1080_ENG.indd High Resolution Day & Night Dome Camera User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
SCD-1080_ENG.indd Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
SCD-1080_ENG.indd safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
● safety information SCD-1080_ENG.indd 3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire. 4. Securely plug the power cord into the power receptacle. insecure connection may cause fire. 5. When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury. 6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera.
SCD-1080_ENG.indd safety information 9. The Mains plug is used as a disconnect device and shall stay readily operable at any time. 10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
SCD-1080_ENG.
Features yy High Resolution By adopting a diagonal 6mm(1/3”) 470,000 pixel SONY CCD, the camera produces clear picture quality with a horizontal resolution of 600TV lines in color mode and 650TV lines for BW. yy Excellent Sensitivity The built-in high sensitivity COLOR CCD produces a clear image. 0.15Lux(50IRE, @F1.2) ● INTRODUCTION SCD-1080_ENG.
SCD-1080_ENG.indd introduction Communication Coaxial communication methods are supported. - Protocol : Pelco Coaxitron OSD The camera control is convenient by using 14 different foreign language O.S.D. English, French, German, Spanish, Italian, Czech, Danish, Polish, Portuguese, Russian, Romanian, Serbian, Swedish, Turkish WHAT’S INCLUDED Check if the following items are included in the product package. )JHI 3FTPMVUJPO %BZ /JHIU %PNF $BNFSB 6TFS .
● INTROdUCTION fRONT 2 1 3 M BOTTO SCD-1080_ENG.indd COmpONeNT NAmes ANd fUNCTIONs ➏ 5 4 ➑ ➐ 1 Dome Cover 2 Pan Base : Control panning angle of camera. 3 3.6x Lens Module : 2.8~10mm(F1.2) 4 Video Output Terminal to Monitor 5 Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item. ➏ Rotate Base : Control rotating angle of camera.
SCD-1080_ENG.indd installation Before installation Before installing your camera, you have to read the following cautions： • You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. • Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. • Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
Figure-1 Figure-2 ● installation SCD-1080_ENG.indd 3) Place the separated ceiling bracket so that the “Front” side faces the area to be monitored and install it with the M4 tapping screws(see Figure-1). Figure-3 4) If a hole has been drilled on the bracket installation surface for cable access, press down to remove the Cable Stopper and attach the provided dustproof plate to it (Figure-2), and arrange the cables through the plate.
SCD-1080_ENG.indd installation Adjust the panning and tilting while watching the monitor 116˚ 98˚ 234˚ 90˚ Rotate Base Tilt Base Pan Base 257˚ 1) You can adjust the camera to point in any direction by using the pan, Tilt, Rotate mechanism.
CONNeCTING TO mONITOR ● CONNeCTION SCD-1080_ENG.indd connection Connect the Video Output jack to the VIDEO-IN jack of monitor. Monitor CCTV Camera As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. CONNeCTING TO pOWeR Connect the adaptor to the power input connector as shown in the figure below.
SCD-1080_ENG.indd connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm2) #22 (0.33mm2) #20 (0.52mm2) #18 (0.83mm2) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 yy As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
ALARM 1 5 DVD RECORDER HDD NETWORK 2 6 BACKUP 3 7 REC ● CONNeCTION SCD-1080_ENG.
SCD-1080_ENG.indd setup Menu Configuration MAIN SETUP LENS ● DC EXPOSURE ● BRIGHTNESS ● SHUTTER ● AGC DEFOG ● AUTO ● OFF ● MANUAL WHITE BAL ● ATW ● AWC→SET ● OUTDOOR ● INDOOR BACKLIGHT ● OFF ● HLC ● USER BLC SSNR ● ON ● OFF DAY/NIGHT ● AUTO ● COLOR ● B/W SPECIAL ● MONITOR ● REVERSE ● LANGUAGE ● CAM TITLE ● SHARPNESS ● RETURN ● PRIVACY ● COAX EXIT ● SAVE ● NOT SAVE ● RESET ● RETURN ● MANUAL ● SYNC ● SSDR Menu Setup Use the Function Setup switch within the camera.
Select the function using the Function Setup switch up/ down. MAIN SETUP ▶ 1. LENS 2.EXPOSURE 3.DEFOG 4.WHITE BAL 5.BACKLIGHT 6.SSNR 7.DAY/NIGHT 8.SPECIAL 9.EXIT DC OFF ATW OFF ON AUTO ● setup SCD-1080_ENG.indd 1. Press the Function Setup switch. yy Main setup menu is displayed on the monitor screen. Change the status using the Function Setup switch left/right. SAVE 2. Select a desired function using the Function Setup switch. yy Place the cursor over a desired item. 3.
SCD-1080_ENG.indd setup EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. 2. Select a desired mode using the Function Setup switch. EXPOSURE SETUP 1. BRIGHTNESS IIIIIIIII*IIIIIIII 10 yy BRIGHTNESS : Adjusts the video brightness. 2. SHUTTER MANUAL yy SHUTTER : You can select shutter mode. 3.AGC MIDDLE - MANUAL : You can control shutter speed manually. 4. RETURN (1/50~1/120,000) - A.
1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’. 2. Select a desired mode using the Function Setup switch. ※ Select one of the following 5 modes, as appropriate for your purpose. yy ATW: Select this when the color temperature is between 1,700°K and 11,000°K. ● setup SCD-1080_ENG.indd White bal(white balance) Use the White Balance function to adjust the screen color.
SCD-1080_ENG.indd setup backlight The SCD-1080 is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary B2 DSP chip. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so that the arrow indicates BACKLIGHT. 2. Select a desired mode using the Function Setup switch depending on the camera purpose.
3. Set the SSNR mode to 'ON' and press the Function Setup switch. SSNR ▶ LEVEL RETURN IIII*IIIIIIIIIIIIIIIIIIIIII 4 ● setup SCD-1080_ENG.indd yy OFF : Deactivates SSNR. Noise is not reduced. yy ON : Activates SSNR so that noise is reduced. 4. Then you can adjust the noise reduction level. M ` You cannot set the SSNR to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.
SCD-1080_ENG.indd setup SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup switch. yy Monitor : Please change the settings value of video LCD MONITOR appropriate to your monitor. -- LCD: Please select this menu item when using an LCD monitor. You can change the gamma, PED level and color gain in the sub menus. ▶ GAMMA PED LEVEL COLOR GAIN RESET 0.
● setup SCD-1080_ENG.indd yy PRIVACY : Mask an area you want to hide on the screen. 1 When the SPECIAL menu screen is displayed, press PRIVACY AREA SETUP the Function Setup switch so that the arrow indicates ▶ 1.AREA AREA1 ‘PRIVACY’. 2.MODE OFF 2 Set up the mode using the Function Setup switch. 3.MASK COLOR GREEN -- AREA : You can select up to 4 PRIVACY areas. 4.SEL POS LEFT -- MODE: Determines whether to use the area selected. *IIIIIIIIIIIIIIIIIIIIIIIIII 42 5.
SCD-1080_ENG.indd setup SSDR(samsung super dynamic Range) SSDR illuminates darker areas of an image while retaining SSDR SETUP the same light level for brighter areas to even out the overall IIIIIIIIII*IIIIIIIIIII 8 ▶ LEVEL brightness of images with high contrast between bright and dark areas. Press SET to Return 1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup switch so that the arrow indicates ‘SSDR’. 2.
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. C heck that the power cord and line connection between the camera and monitor are fixed properly. Check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim.
SCD-1080_ENG.indd specifications Specifications SCD-1080P SCD-1080PD Video Imaging Device 1/3’’ Super HAD CCD II (Double Scan) Total Pixels 795(H) x 596(V) Effective Pixels 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization Internal / Line-Lock Frequency H: 15.625KHz, V: 50Hz Horizontal Resolution COLOR : 600TVL, B/W: 650TVL Min. Illumination 0.15 Lux (50IRE, @F1.2)(AGC: High) S/N (Y Signal) 52dB (Weight On, AGC Off) Video Output CVBS : 1.
SCD-1080PD ON Screen Display English, French, German, Spanish, Italian, Czech, Danish, Polish, Portuguese, Russian, Romanian, Serbian, Swedish, Turkish Camera Title On / Off (Displayed 15 Characters) Day & Night AUTO (Electrical)/COLOR / BW Backlight Compensation OFF/USER BLC / HLC SSDR On / Off Noise Filter(SSNR) On / Off Privacy Masking On / Off (4 Programmable zones) Gain Control Low / High / Middle / Off White Balance ATW / Outdoor / Indoor / Manual / AWC->SET (1,700°K ~ 11,000°K) Ele
SCD-1080_ENG.
SCD-1080_ENG.
SCD-1080_ENG.indd SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com 32 SAMSUNG TECHWIN EUROPE LTD.
