User manual

● CONNECTION
English_15
CONNECTING TO MONITOR
Connect the Video Output jack to the VIDEO-IN jack of monitor.
 As the connecting method varies with the instruments, refer to the manual supplied with the
instrument.
 Only connect the cable when the power is turned off.
CONNECTING TO POWER
Connect the adaptor to the power input connector as shown in the figure below.
The recommended adaptor specification for SCD-1080P is DC12V/500mA or AC24V/500mA,
for SCD-1080PD is DC12V/500mA.
---- Power Input Terminal
connection
CCTVCamera
Monitor
SCD-1080_ENG.indd 15 2012-8-27 10:33:05