User manual

22_ setup
setup
BACKLIGHT
The SCD-1080 is designed so that it delivers a distinctive subject and backgr
ound at the same time, even when
the subject is in backlight, by adopting a function of the proprietary B2 DSP chip.
1.
When the SETUP menu scr
een is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so
that the arrow indicates BACKLIGHT.
2.
Select a desir
ed mode using the Function Setup switch depending on the camera purpose.

USER BLC : Enables a user to dir
ectly select a desired
area from a picture and to view the area more clearly.
- LEVEL : Adjusts the brightness level of a monitoring
ar
ea.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the ar
ea to be
enhanced.
 HLC (High Light Compensation) :
This function masks any areas of peak white light, this
minimizes whiteout due to over exposure and thus preserve
much of the on-screen details that are within the camera view.
- LEVEL : Adjusts the brightness level of a monitoring area.
- LIMIT : Enable to change the operating condition.
- MASK COLOR :Change the color of the masking area.
(Black, Red, Blue, Gray, Magenta)
 O
ff : Not being used
.
ssNR
This function r
educes the background noise in a low luminance environment.
1. When the SETUP menu scr
een is displayed, select 'SSNR' by using the Function Setup switch
so that the arrow indicates 'SSNR'.
2. Select a desir
ed mode using the Function Setup switch.
HLC SETUP
▶ 1. LEVEL
MIDDLE
2. LIMIT
NIGHT ONLY
3. MASK COLOR BLACK
4. RETURN
BLC SETUP
▶ 1. LEVEL
MIDDLE
2. TOP
IIIII
*
IIIIIIIIIIIIIIII
81
3. BOTTOM
IIIIIIIIIIII
*
IIIIIIIII
181
4. LEFT
IIIIII
*
IIIIIIIIIIIIIII
211
5. RIGHT
IIIIIIIIIIIIIIII
*
IIIII
461
6. RETURN
SCD-1080_ENG.indd 22 2012-8-27 10:33:08