User manual

English_15
● INSTALLATION
n
g
ADJUST THE PANNING AND TILTING WHILE
WATCHING THE MONITOR
You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
Pan Base moves by 176˚ to each side direction and 352˚ on the whole.
Tilt Base covers total 73˚ angle(0˚ ~ 73˚).
Rotate Base moves by 174° to each side direction and 348° in total.
Methods of adjustment
Installing the dome on a wall
➊
After mounting the camera on a wall, adjust the panning angle so that the
camera faces the direction that is to be monitored.
➋
Adjust the tilting angle by rotating the tilt base.
➌
Loosen the rotate base hold screw and adjust rotate base for the best view.
➍
Tighten the rotate base hold screw.
Installing the dome on a ceiling
➊
After mounting the camera on a ceiling, adjusting the panning angle to the
correct viewing position by rotating the pan base.
➋
Adjust the tilting angle by rotating the tilt base.
➌
Loosen the rotate base hold screw and adjust rotate base for the best view.
➍
Tighten the rotate base hold screw.
1.
y
y
y
2.
y
y
73˚
174˚
176˚
Pan Base
Tilt Base
Rotate Base