User manual

English_19
● SETUP
MAIN SETUP
䯝 1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT COLOR
8.SPECIAL
9.EXIT SAVE
Change the status
using the Function
Setup switch.
Select the function
using the Function
Setup switch.
Select a desired function using the Function Setup switch.
Place the cursor over a desired item.
Set up a selected item by using the Function Setup switch.
To fi nish the setting, select ‘EXIT’ and press the Function Setup switch.
An item with the icon also has sub menus. To select a sub menu, select an item with the icon
and press the Function Setup switch.
An item with the - - - icon is unavailable due to function settings.
LENS
Using this function, you can control the screen brightness.
When the SETUP menu screen is displayed,
select ‘LENS’ by using the Function Setup
switch so that the arrow indicates ‘LENS’.
The Lens mode has a sub menu, shown below.
BRIGHTNESS : Adjusts the video brightness.
FOCUS ADJ : To adjust the lens focus correctly, you must activate the
Focus Settings mode. To activate the Focus Settings mode, adjust the
lens focus, and then deactivate the settings mode.
You can adjust the shutter value of ESC shutter mode.
If color rolling occurs, set Shutter to ---.
EXPOSURE
When the SETUP menu screen is displayed,
select EXPOSURE by using the Function
Setup switch so that the arrow indicates
'EXPOSURE'.
Select a desired mode using the Function
Setup switch.
2.
y
3.
4.


1.
2.
-
-
y

1.
2.
MAIN SETUP
䯝 1.LENS DC
2.EXPOSURE
MAIN SETUP
1.LENS DC
䯝 2.EXPOSURE
3.WHITE BAL ATW