High Resolution Varifocal Dome Camera SCD-2080 User Guide Before installing and operating this product, please read this manual thoroughly.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.
Contents Contents Features • Features…………………………………………………………………………… 5 • Precautions… …………………………………………………………………… 7 • Components and Accessories……………………………………………… 8 • Overview…………………………………………………………………………… 9 • Installation………………………………………………………………………… 9 ■ Installation…………………………………………………………………………………… 9… ■ Adjust the panning, tilting and rotating while watching the monitor………………… 12 • Connection………………………………………………………………………… ■ Connecting to Monitor… ……………………………………………………………… ■ Connecting to Power…………………………………………
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment.
Overview Precautions Do not expose the camera to radioactivity. 9 Do not expose the camera to rain or other types of liquids. ❶ 4 2 3 8 If exposed to radioactivity, the CCD will fail. 5 May cause a product malfunction.Wipe dry any liquids. Liquids may contain minerals that are corrosive to electronic components. Notes • Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
Installation Installation 1) Separate the dome cover by turning anti-clockwise. 2) Separate the shield case by pulling from the camera body. When using the Ceiling bracket * To install the dome cover on the camera body, turn the latches in locking direction as shown in the figure 1.
Connection Installation Connecting to Monitor Adjust the panning and tilting, rotating while watching the monitor Connect the Video Output jack to the VIDEO-IN jack of monitor. 73˚ 174˚ 176˚ CCTV Camera Rotate Base Tilt Base Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. • If necessary, you can connect the monitor to the REMOTE jack on the back of your camera. • Only connect the cable when the power is turned off.
Operating Your Camera Connection Menu Configuration Notes • Be sure to connect power only after all the installation is complete. • Note that AC / DC adaptor is not supplied with camera. • Ground should be connected to the GND terminal.
Operating Your Camera Menu Setup Notes Use the Function Setup switch within the camera. • An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the Function Setup switch. • An item with the - - - icon is unavailable due to function settings. LENS Function Setup switch Using this function, you can control the screen brightness. 1.
Operating Your Camera EXPOSURE SETUP 1.BRIGHTNESS 25 2.SHUTTER --3.AGC HIGH 4.SENS-UP OFF 5.RETURN SHUTTER : You can select the shutter. - A.FLK : Select this when you experience picture flicker, this happens when there is a clash with the installed lighting frequency. - ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is automatically controlled depending on the ambient illumination of the subject. - MANUAL : You can control shutter speed manually.
Operating Your Camera AWC →SET : To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it. Notes • White Balance may not work properly under the following conditions. In this case select the AWC mode. ❶ When the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset).
Operating Your Camera HLC (High Light Compensation) : If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. - LEVEL : Adjust level of the HLC function. - LIMIT : Enable to change the operating condition. - MASK COLOR/TONE : Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta) - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
Operating Your Camera DAY/NIGHT You can display pictures in color or in black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Function Setup switch so that the arrow indicates ‘DAY/NIGHT’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 8.SPECIAL 2. S elect a desired mode using the Function Setup switch according to the picture display you want. COLOR : The picture is always displayed in color.
Operating Your Camera 2. Select a desired mode using the Function Setup switch. 1. 2. 3. 4. 5. 6. 7. 8. 9. SPECIAL IMAGE ADJ MONITOR LCD CAM TITLE OFF SYNC INT MOTION DET OFF PRIVACY OFF DIS OFF LANGUAGE ENGLISH RETURN I MAGE ADJ : 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the arrow indicates ’IMAGE ADJ‘. 2) Select a desired mode using the Function Setup switch. 1. 2. 3. 4. 5. 6.
Operating Your Camera 5) Enter a title, move the cursor to ‘POS’ and press the Function Setup switch. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch. When the position is determined, select ‘END’ and press the Function Setup switch to return to the SPECIAL menu.
Operating Your Camera 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ‘PRIVACY’. 2) Set up the mode using the Function Setup switch. - AREA : You can select up to 12 PRIVACY areas. - MODE : Determines whether to use the area selected in the AREA. - MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray. - MASK TONE : Adjust the brightness of MASK COLOR.
Dimension Specifications SCD-2080N Min.
DECLARATION OF CONFORMITY Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD MEMO 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SCD-2080P Beginning Serial NO. C5CZ6V3Z200001X Year of Manufacture 2010.02.
SALES NETWORK • AMSUNG TECHWIN CO., LTD. S 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 • AMSUNG TECHWIN AMERICA Inc. S 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com • AMSUNG TECHWIN EUROPE LTD.