High Resolution Day/Night IR Dome Camera User Manual SCD-2080R
B T ■ ■ High Resolution Day/Night IR Dome Camera User Manual Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
safety information 6 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
e e 7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric shock. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way.
safety information im FCC STATEMENT 1 2 3 4 5 6 7 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
o e Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
contents in INTRODUCTION 9 INSTALLATION 12 CONNECTION 16 SETUP 18 9 10 11 Features What’s included Component names and Functions 12 15 Installation Adjust the panning and tilting while watching the monitor F y y y 16 16 17 Connecting to Monitor Connecting to Power Using Coaxial Communications y 18 18 Menu Configration Menu Setup y 31 Troubleshooting y TROUBLESHOOTING 31 SPECIFICATIONS 32 y 32 34 Specifications Dimension y y 8_ contents
introduction FEATURES y Excellent Sensitivity The Built-in high sensitivity COLOR CCD enables a clear image even in 0Lux(B/ W,IR-LED ON) or lower illumination, y SSNR3 (Samsung Super Noise Reduction) Function The high-performance W-V DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments. y Day & Night (ICR) This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions.
introduction y Miscellaneous Functions HLC(High Light Compensation), SENS-UP, H/V-REV, D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY functions are provided. y OSD The camera control is convenient by using 18 different foreign language O.S.D.
COMPONENT NAMES AND FUNCTIONS FRONT ❶ ➋➌ ● INTRODUCTION ➑ ➍ ➎ ➏ ➐ ❶ Pan Base : control panning angle of camera ❷ Tilt Base : control tilting angle of camera ❸ Video Output Terminal to Monitor ❹ x3.6 Vari-focal Lens Module 2.8 ~ 10.0mm (F1.2) ❺ Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.
installation INSTALLATION 1. Separate the dome cover by turning anti-clockwis. 2. Separate the shield case by pulling from the camera body. Latch Locking direction Main Body (Camera) [Figure1] Unlocking direction (Anti-clockwise) Locking direction (Clockwise) Dome cover ※ To install the dome cover on the camera body, turn the latches in the locking direction as shown in the figure 1. The installation should be done by qualified service personnel or system installers.
er Ceiling bracket An arrow for installing directions ● INSTALLATION f WHEN USING THE CEILING BRACKET M4 tapping screw (provided) CAMERA Locking direction Unlocking direction Dome cover 1. Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of the camera by rotating it anti-clockwise. (refer to the picture in 'Notes' on page 12) 2.
installation Pan Base fixation screw M4 tapping screw [Figure-2] If you want to install the camera with the ceiling bracket combined, fix it using two M4 tapping screws at the side of the main body (refer to the [Figure-2] on page 14) 14_ installation A W
ADJUST THE PANNING AND TILTING WHILE WATCHING THE MONITOR 73˚ 176˚ Rotate Base Tilt Base Pan Base ng 1. You can adjust the camera to point in any direction by using the pan, Tilt mechanism. y Pan Base can rotates by ±176°(total 352°) y Tilt Base covers 73˚ angle. y Rotate Base moves by 174° to each side direction and 348° on the whole. 2.
connection * * CONNECTING TO MONITOR Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. U y y Monitor CCTV Camera y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. y Only connect the cable when the power is turned off. CONNECTING TO POWER Connect the adaptor to the power input connector as shown in the figure below. The recommended adaptor specification for SCD-2080RN/SCD-2080RP is DC 12V / 500mA.
* Standard voltage for camera operation : DC 12V ± 10% * There may be some deviation in voltage drop depending on the type of wire and the manufacturer. USING COAXIAL COMMUNICATIONS y Coaxial Communications System y OSD Control method CAMERA DVR SET MENU/ENTER OSD KEY UP UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT CONTROLLER DVR ALARM HDD NETWORK BACKUP REC REC 1 A.
setup MENU CONFIGRATION S b d fu Setup Menu LENS ● DC EXPOSURE ● BRIGHTNESS ● SENS-UP ● SHUTTER ● RETURN ● AGC WHITE BALANCE ● ATW ● MANUAL ● OUTDOOR ● AWC→SET ● INDOOR SSDR ● OFF ● ON BACKLIGHT ● OFF ● BLC SSNR3 ● OFF ● ON DAY/NIGHT ● AUTO ● COLOR ● B/W SPECIAL ● IMAGE ADJ ● MOTION DET ● LANGUAGE ● MONITOR ● PRIVACY ● RETURN ● CAM TITLE ● DIS EXIT ● SAVE ● NOT SAVE ● RESET MENU SETUP Use the Function Setup switch beside of the lens. Function Setup switch 1.
MAIN SETUP 䯝 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT 8.SPECIAL 9.EXIT DC ATW OFF OFF ON AUTO Change the status by moving the setup switch left or right. SAVE 2. Select a desired function using the Function Setup switch. y Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4. To finish the setting, select ‘EXIT’ and press the Function Setup switch. An item with the icon also has sub menus.
setup 2. Select a desired mode using the Function EXPOSURE SETUP Setup switch. 䯝 1.BRIGHTNESS IIIIIÂIIIIIIIIIIIIIIII 25 y BRIGHTNESS : Adjusts the video brightness. 2.SHUTTER --y SHUTTER : You can select either auto or 3.AGC HIGH 4.SENS-UP OFF manual shutter. 5.RETURN - A.FLK : Select this when you experience picture flicker, which can happen when there is a clash with the frequency of the installed lighting. - ESC : Select this to control the shutter speed automatically.
0) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’. 2. Select a desired mode using the Function Setup switch. MAIN SETUP 1.LENS 2.EXPOSURE 䯝 3.WHITE BAL 4.SSDR DC ATW OFF ※ Select one of the following 5 modes, as appropriate for your purpose. y ATW : Select this when the color temperature is between 1,700°K and 11,000°K.
setup SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. 1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup switch so that the arrow indicates ‘SSDR’. 2. Use the Function Setup switch to change the SSDR level in the sub menu according to the contrast between bright and dark areas.
or n - LEVEL : Adjust level of the BLC function. - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. y HLC (High Light Compensation) : This function masks the strong light to minimize white out due to over exposure and preserve much of the on-screen details when the camera aims a strong light source. - LEVEL : Adjust level of the HLC function. - LIMIT : Enable to change the operating condition. - MASK COLOR/TONE : Change the color / brightness of the masking area.
setup SSNR3 This function reduces the background noise in a low luminance environments. 1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function Setup switch so that the arrow indicates 'SSNR3' . 2. Select a desired mode using the Function Setup switch. y OFF : Deactivates SSNR3 so that noise is not reduced. y ON : Activates SSNR3 so that noise is reduced. 3. Set the SSNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the noise reduction level. MAIN SETUP 1.
y B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. - IR LED Mode : On: 12EA, Off: 6EA IR MODE SETUP - IR Mode : When IR LED is turned on IIIIIÂIIIIIIIIIIIIIIII TOP 50 in B/W, the objects can be IIIIIIIIIIIIIIIIIIÂIII 110 BOTTOM clearly identified due to the IIIIIIÂIIIIIIIIIIIIIII 52 LEFT function that decreases screen IIIIIIIIIIIIIIIIÂIIIII 118 RIGHT saturation of objects within a short distance.
setup SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup switch. MAIN SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.SSDR 5.BACKLIGHT 6.SSNR3 7.DAY/NIGHT 䯝 8.SPECIAL 9.EXIT SPECIAL #䯝 1.IMAGE ADJ 2.MONITOR 3.CAM TITLE 4.MOTION DET 5.PRIVACY 6.DIS 7.LANGUAGE 8.
may appear. y Monitor : Please change the settings value of video appropriate to your monitor. - LCD : Please select this menu item when using an LCD monitor. You can change the gamma, PED level and color gain in the sub menus. LCD MONITOR ▶ GAMMA 0.55 IIIIIÂIIIIIIIIIIIIIIII 17 PED LEVEL IIIIIIIIIIIIIIIÂIIIIII 50 COLOR GAIN RESET Press SET to Return - CRT : Please select this menu item when using a CRT monitor. - USER : Please use this menu item when using a monitor other than standard ones.
setup When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one. Only English is available in the mode. If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup switch.
ou Y. d. w, ➊ When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ‘PRIVACY’. PRIVACY AREA SETUP 䯝 1.AREA AREA1 2.MODE OFF 3.MASK COLOR GREEN ÂIIIIIIIIIIIIIIIIIIIII 4.MASK TONE 1 IIÂIIIIIIIIIIIIIIIIIII 5.TOP 39 IIIIIÂIIIIIIIIIIIIIIII 79 6.BOTTOM ÂIIIIIIIIIIIIIIIIIIIII 13 7.LEFT IIIÂIIIIIIIIIIIIIIIIII 8.RIGHT 52 9.RETURN ➋ Set up the mode using the Function Setup switch. - AREA : You can select up to 12 PRIVACY areas.
setup t EXIT T Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. If n y SAVE : Save the current settings and exit the MAIN SETUP menu. y NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. y RESET: Resets the camera settings to the factory defaults. Language and Monitor settings are not initialized.
troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ Check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim.
specifications SPECIFICATIONS SCD-2080RN SCD-2080RP Video Imaging Device 1/3” Super HAD CCD II Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization Internal Frequency H : 15.734KHz V:59.94Hz Horizontal Resolution Color : 600 TV lines, B/W : 700TV lines Min. Illumination Color : 0.15Lux (50IRE@F1.2), 0.
SCD-2080RP On / Off (Level adjustable) Backlight Compensation BLC / HLC / OFF Camera Title Off / On (Displayed 15 characters) Day & Night Auto (ICR) / Color / B/W ● SPECIFICATIONS e SCD-2080RN SSDR Backlight Compensation BLC / HLC / Off Contrast Enhancement SSDR (Off / On) Digital Noise Reduction SSNR3 ( Off/On ) Digital Image Stabilization Off / On Motion Detection Off / On (8 programmable zones) Privacy Masking Off / On (12 programmable zones) Sens-up (Frame Integration) 2x ~ 512x Gain Co
specifications DIMENSION Ø115.8 mm 92.
MEMO
MEMO
MEMO
MEMO
MEMO
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.