User manual

English_21
● SETUP
WHITE BAL (WHITE BALANCE)
Use the White Balance function to adjust the screen color.
When the SETUP menu screen is displayed,
select ‘White Bal’ by using the Function
Setup switch so that the arrow indicates
‘White Bal’.
Select a desired mode using the Function
Setup switch.
※ Select one of the following 5 modes, as appropriate for your purpose.
ATW
: Select this when the color temperature is between 1,700°K and 11,000°K.
OUTDOOR : Select this when the color temperature is between 1,700°K and
11,000°K.(sodium light inclusion)
Select this when the color temperature of environment surrounding
the subject is out of the control range (e.g. clear sky, or sunset).
INDOOR : Select this when the color temperature is between 4,500°K and 8,500°K.
MANUAL : Select this to fi ne-tune White
Balance manually. Set White
Balance fi rst by using the ATW
or AWC mode. After that switch
to MANUAL mode, fi ne-tune the
White Balance and then press
the Function Setup switch.
AWC→SET
: To fi nd the optimal luminance level for the current environment,
point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
White Balance may not work properly under the following conditions.
➊ When the ambient illumination of the subject is dim.
➋ If the camera is directed towards a fl uorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
1.
2.
y
y
y
y
y

n
0
)
g
n
MAIN SETUP
1.LENS DC
2.EXPOSURE
䯝 3.WHITE BAL ATW
4.SSDR OFF
WB MANUAL
䯝 RGAIN
IIIIIIIIIIIIIIII
Â
IIIIIIIIIIIIII
529
BGAIN
IIIIIIIIIIIIIIII
Â
IIIIIIIIIIIIII
532
Press SET to Return