HD-SDI CAMERA User Manual SCD-6081R
HD-SDI Camera User Manual Copyright ©2013 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
overview Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. ● overview 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).
Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
overview Please read the following recommend safety precautions carefully. yy Do not place this apparatus on an uneven surface. yy Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. yy Do not place this apparatus near conductive material. yy Do not attempt to service this apparatus yourself. yy Do not place a glass of water on the product. yy Do not install near any magnetic sources. yy Do not block any ventilation openings.
CONTENTS 3 8 9 10 Important Safety Instructions Product Features What’s Included At a Glance installation & connection 13 16 Installation Connecting with other Device Operating Your Camera 20 21 Menu Configuration Menu Setup appendix 37 38 39 Troubleshooting Specification Product Overview 3 13 2O 37 English _7 ● overview overview
overview Product Features •• Supports Full HD-SDI Video By adopting a diagonal 6mm (1/3”) 2M pixel CMOS, the camera produces clear picture quality. •• Excellent low-illumination image quality By adopting high-sensitive colour CMOS, the camera provides clear image quality under a severe low illumination condition of 0.015 Lux (with SENS-UP, x60).
What’s Included Check if the main unit and all the following accessories are included in the product package. Item Name Quantity Description Camera 1 Quick Manual 1 Cable for the testing monitor 1 Function cable 1 Iron Screw 2 Useful for installation on the ceiling, wall, etc.
overview At a Glance appearance a b Item Description Dome cover Case cover used to protect the lens and the main unit. b Camera Case Housing part that covers the camera body.
Components a ● overview b c d UPDA TE e f g h 1.G ND XT _DN 2.E i 3.MD_OUT 4.RS_485+ 5.
overview Item Description a Internal Cover It is a cover to protect the main body. b Illumination Sensor Detects incoming light to control the IR LED. c Lens Lens for the camera. d IR LED These infrared LED’s are controlled by the illumination sensor. e UPDATE Used for the upgrade of the software application. The switch is used for setting and adjusting the camera’s functions and properties.
installation & connection INSTALLATION Precautions before installation Ensure you read out the following instructions before installing the camera: Disassembling 1. Use one hand to hold the camera’s bottom part and turn the cover counterclockwise with another hand to separate it. ● installation & connection • It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera including the installation bracket.
installation & connection Installation 1. Attach the installation template to the selected area and punch 2 holes as shown in the figure. 5. Fasten the dome case (dome cover + camera case) to the main body as shown in the figure. J Pay attention to the direction for assembly. 14_ installation & connection 3.MD_OUT 4.RS_485+ 5.RS_485- 4. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera” section. (page 15) 1.G ND XT _DN 3.
Adjusting the monitoring direction for the camera Pan ● installation & connection 1.G ND XT _DN 2.E 3.MD_OUT 4.RS_485+ 5.RS_485- Tilt Lens rotation Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation. - The effective range of pan is a total of 354 degrees.
installation & connection CONNECTING WITH OTHER DEVICE 3.M 4.R D_O UT 5.R S_4 85 S_ + 48 5- Test monitor for installation ND N 1.G T_D X 2.
connecting to the monitor Connect the video out port of the camera to the video input port of the monitor. M ` To check the display screen after installing the camera for the first time, you can use the Video HD-SDI video. ` The video source from the HD-SDI port can be displayed on the dedicated monitor. To display the source on a commercial monitor, you need a converter to convert the video signal as appropriate.
installation & connection Default rS-485 communication settings Item Default J CAM ID BAUD RATE 1 9600 UART MODE 8-N-1 RET PKT DISABLE ` When constructing a proprietary controller for direct camera control, apply Pelco-D or SamsungTechwin protocol. ` Use only a DVR model that supports HD-SDI saving. external Day/night Switching input Day/Night mode of the camera can be switched by signal from an external device.
power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. ` Be careful not to reverse the polarity when you connect the power cable. ` Be sure to turn the power off the device to be connected. for ac/Dc power Supply You can use either one of AC 24V/1A~2A and DC 12V/2A~4A adaptor. resistance of copper wire [at 20°c (68°f)] Wire specification (AWG) #24(0.22mm2) #22(0.33mm2) #20(0.52mm2) Voltage Drop (V/m) 0.028 0.018 0.
Operating Your Camera Menu Configuration LENS EXPOSURE • DC MAIN SETUP • BRIGHTNESS • SHUTTER • AGC • SENS-UP • DEFOG • SSDR • ATW • MANUAL • AWC ➝ SET • OUTDOOR • INDOOR • RETURN WHITE BAL SIMPLE FOCUS • FOCUSING ➝ SET BACKLIGHT • OFF SSNR3 • ON • OFF • AUTO • EXTERN • COLOR • CAM TITLE • IMAGE ADJ • INTELLIGENCE • PRIVACY • PROFILE • COMM ADJ • LANGUAGE • RESET • RETURN DAY/NIGHT SPECIAL • BLC • HLC • WDR • B/W EXIT 20_ Operating Your Camera
Menu Setup To configure the camera’s function settings, use the button on the rear side of the product. UPDA TE ● Operating Your Camera 1. 2.EX GND T_DN 3.MD_OUT 4.RS_485+ 5.RS_485- •• $% : Moves up/down in menu. •• _+ : Moves right/left in menu. •• @ : Press the switch to set the function in camera menu. To move to a sub-menu item in the menu, press this switch. 1. Press the SET button. •• Enters the function menu. The selected function’s menu appears on the monitor.
Operating Your Camera 3. Use the Up/Down buttons to select a desired function. •• Move the button right or left to display available values or settings. Set the desired setting value using the button. 4. To finish, select and press the SET button. the icon also has sub menus. To select a sub menu, select an item with the icon MM `` AnpressitemthewithFunction Setup switch. `` An item with the --- icon is unavailable due to function settings. LENS The lens type is fixedly DC.
• SHutter : You can select the shutter. - – – – : 1/30sec - ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is automatically controlled depending on the ambient illumination of the subject. EXPOSURE SETUP BRIGHTNESS SHUTTER AGC SENS-UP DEFOG SSDR RETURN .... .... * .... .... 50 ESC HIGH AUTO --ON - MANUAL : You can control shutter speed manually (1/30sec ~ 1/16,000sec) J ` When you use a DC lens, set the shutter mode to --- if color rolling occurs.
Operating Your Camera • SSDR(samsung super dynamic Range) : SSDR illuminates darker areas of an : image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. - ON : Use the Function Setup switch to change the SSDR level in the sub menu according to the contrast between bright and dark areas. - OFF : Turn off SSDR function.
Select one of the following 5 modes, as appropriate for your purpose. Balance may not work properly under the following conditions. In this case select the AWC JJ `` White mode. -- When the ambient illumination of the subject is dim. -- If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable.
Operating Your Camera SimpLe focuS You can adjust the focus of video image. 1. When the SETUP menu screen is displayed, select < SIMPLE FOCUS > by using the Function Setup switch so that the arrow indicates < SIMPLE FOCUS >. 2. Use the Function Setup switch to set up the focus. • focuSinG ➝ Set : Select this to fit the focus automatically. J 1. 2. 3. ► 4. 5. 6. 7. 8. 9.
• HLc (High Light compensation) : If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. - MASK TONE : Change the brightness of the masking area. HLC SETUP LEVEL MIDDLE BLACK MASK COLOR .... .... * .... .... MASK TONE 7 .... .... .... .... TOP 30 * .... .... .... * .... BOTTOM 75 .... * .... .... .... LEFT 30 .... .... .... * .... RIGHT 75 RETURN - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
Operating Your Camera SSNR3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select by using the Function Setup switch so that the arrow indicates . 2. Select a desired mode using the Function Setup switch. •• ON : Activates SSNR3 so that noise is reduced. •• OFF : Deactivates SSNR3. Noise is not reduced. 1. 2. 3. 4. 5. ► 6. 7. 8. 9.
-- DURATION : Adjust the brightness of the lighting where the mode switch occurs. DAY/NIGHT AUTO SETUP ► 1. COLOR B/W DWELL TIME DURATION 2. B/W COLOR DWELL TIME DURATION 3. DN FOCUS 4. RETURN 5 SEC FAST 10 SEC FAST OFF - DN➝ FOCUS : The video is automatically focused after the lighting mode changes from Day to Night or vice versa. • eXtern : Control the image modes of Color and B/W when an external controller is synchronized via the Alarm In port.
Operating Your Camera •• CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates . 2) Set it to by using the Function Setup switch. 3) Press the Function Setup switch. A B C NOP a b c n o p – .
1. ► 2. 3. 4. 5. 6. 7. 8. 9. SPECIAL SETUP CAM TITLE IMAGE ADJ INTELLIGENCE PRIVACY PROFILE COMM ADJ LANGUAGE RESET RETURN OFF OFF BASIC ENGLISH 2) Select a desired mode using the Function Setup switch. -- MONITOR : Please change the settings value of video appropriate to your monitor. •• LCD : Please select this menu item when using an LCD monitor. •• USER : Please use this menu item when using a monitor other than standard ones. You can change the gamma, color level and reset in the sub menus.
Operating Your Camera • inteLLiGence : Commands the camera to motion-detect and trace an object. - DETECTION : Since the camera detects motion without any additional external sensor, you can monitor activity more effcient. - TRACKING : Commands the camera to detect and trace a moving object. ▶ TYPE : Two types, line and area, of fences are available. ▶ COUNT : Displays the number of times that an object enters or leaves a fenced area. INTELLIGENCE ► 1. 2. 3. 4. 5. 6. 7. 8.
RETURN TRACKING POS1 .... .. .. .... .... 106 * .... .... .... .... 12 * DIR1 ► SEL POS X POS Y POS DIRECTION TRACKING POS1 .... .. .. .... .... 106 * .... .... .... .... 12 * IN RETURN - FIXED/MOVED : Detects an object that emerges or disappears from the screen, or stays onscreen without movement .
Operating Your Camera ▶ SENSITIVITY : Set the sensitivity of the motion detection. When adjusting the sensitivity, note that the lower the level means the higher sensitivity. ▶ DET. SIZE : Selects an object size to detect on the screen. When adjusting the detection size, note that the higher the level means the bigger detection size. ▶ RETURN : Select this to save the SETUP CONFIG menu settings and return to the INTELLIGENCE menu.
▶ RETURN : Select this to save the TYPE 2 menu settings and return to the PRIVACY menu. - RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu. 1. 2. 3. 4. ► 5. 6. 7. 8. 9. SPECIAL SETUP CAM TITLE IMAGE ADJ INTELLIGENCE PRIVACY PROFILE COMM ADJ LANGUAGE RESET RETURN OFF OFF BASIC ENGLISH - BACKLIGHT : It will be set automatically so you can distinguish the object from the background in a severe backlighting scene.
Operating Your Camera • comm aDJ (communication adjustment) : This function sets up the camera communication status when controlling the camera through an external control device. 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates . 2) Set up the mode using the Function Setup switch. ► 1. 2. 3. 4. 5. 6. 7. COMMUNICATION SETUP PROTOCOL CAM ID BAUD RATE UART MODE DISP ID RET PKT RETURN SAMSUNG-T * .... .... .... ....
appendix trouBLeSHootinG PROBLEM y When the camera’s HD-SDI BNC output is directly connected to the monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input. y When the camera’s HD-SDI BNC output is connected to the DVR: Make sure the DVR supports HD-SDI signal input. y HD-SDI output is converted into other format such as DVI and VGA by using video converter: Make sure the converter’s HD-SDI input format supports the product’s output video format. The image on the screen is dim.
appendix Specification Items Video Video 1/3" Progressive Scan CMOS Total Pixels 2,010(H) x 1,108(V), 2.2M Pixels Effective Pixels 1,944(H) x 1,092(V), 2.1M Pixels Scanning System Progressiv Scan Min. Illumination Color : 1Lux @ F1.2, 0.015 Lux (Sens-up, x60) B/W : 0 Lux ( IR LED,ON ) S / N Ratio Video Output Lens Type Operational Description 50dB (AGC off, Weight on) SMPTE292M ( HD-SDI ), Monitoring CVBS Lens Type DC Auto Iris Lens (3~8.5mm (2.
Items Environmenta Electrical Mechanica Privacy Masking Off / On (4 Polygonal + 16 Rectangular zones) Sens-up (Frame Integration) Off / Auto (x2 ~ x60) Gain Control Off / Low / Middle / High White Balance ATW / Outdoor / Indoor / Manual / AWC ➝ SET (1,700K° ~ 11,000K°) Electronic Shutter Speed Esc / A.
appendix Product Overview 40_ appendix Unit : mm
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com PT01-000568B-SCB-6000-ENGLISH-.indb 40 SAMSUNG TECHWIN EUROPE LTD.
