User Manual

overview

12_ overview

Item Description

UPDATE

1:GND

2:EXT_D/N

3:MD_OUT

4:RS-485+

5:RS-485–

Internal Cover It is a cover to protect the main body.

Illumination Sensor Detects incoming light to control the IR LED.

Lens Lens for the camera.

IR LED These infrared LED’s are controlled by the illumination sensor.

SETUP Switch

The switch is used for setting and adjusting the camera’s functions and

properties.

Move this switch left or right to move the cursor or change

the value in the menu.

When menu is off, use this switch for adjusting focus.

VIDEO

Analogue video output terminal of Video.

Use a monitor cable for testing the camera with a portable display.

(for installation)

I/O Port

Earth-grounding port for external signal.

External signal input port for Day/Night mode setup.

Output port that signals when a motion is detected.

Signal port for RS-485 communication.

Power Port Used to plug the power cable.

HD-SDI Video Out

terminal

BNC terminal for HD-SDI video signal output.

Used for the upgrade of the software application.

Move this switch up or down to move the cursor in the menu.

When menu is off, use this switch for adjusting zoom.

Long to press this button to

set the function in menu.

To move to a submenu item in the menu, press this switch.

Short to press this button to fit the focus automatically.