User Manual
English _23
OPERATING YOUR CAMERA●
 • SHUTTER : You can select the shutter.
 - – – – : 1/30sec
 - A.FLK : Select this when you experience 
picture flicker, this happen when there is a 
clash with the installed lighting frequency.
 - ESC : Select this to control the shutter speed 
automatically. If ESC is selected, the shutter 
speed is automatically controlled depending on 
the ambient illumination of the subject.
 - MANUAL : You can control shutter speed manually (1/30sec ~ 1/16,000sec)
 J
`
When you use a DC lens, set the shutter mode to --- if color rolling occurs.
`
Carefully position the camera when installing, since produced image quality might be poor if 
framing a bright light source while the shutter mode of EXPOSURE is set to AUTO.
`
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
EXPOSURE SETUP
1.  BRIGHTNESS 
.... .... 
*
.... ....
 50
2.  SHUTTER 
3.  AGC   HIGH
4.  SENS-UP AUTO 
5.
  RETURN 
►
 ESC
DEFOG  --- 
6.
SSDR  ON 
7.
 • SENS-UP : When it is night or dark, the camera automatically detects the light level 
and maintains a clear picture if this mode is activated.
 - OFF : Deactivates the SENS-UP function.
 - AUTO : Activates the SENS-UP function.
 • AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - 
but the greater the noise.
 - OFF : Not being used
 - Low : Allows automatic gain control from 5.3dB to 20dB.
 - Medium : Allows automatic gain control from 5.3dB to 26dB.
 - High : Allows automatic gain control from 5.3dB to 32dB.
 • DEFOG
 - AUTO
 - MANUAL
-
 : Through the defogging function, camera can automatically recognize fog 
concentration of the image, defog, self correct in hazy, rainy, flue gas and other 
inclement weather to get a clear image.
  OFF : Turn off Defogging function.
DEFOG SETUP
LEVEL   MIDDLE
►
: The camera will automatically correct 
image according to the defogging level
(low, middle, high) set by the user.
 : The camera will adjust the definition 
of the image according to user's 
preferences through the defogging 
level (low, middle, high).
RETURN 










