00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 101 ENGLISH Digital Video Camcorder SCD27/D29 AF CCD LCD Auto Focus Charge Coupled Device Liquid Crystal Display Owner’s Instruction Book Before operating the unit, please read this instruction book thoroughly, and retain it for future reference.
00659A SCD27/D29 SEA-SAFETY 5/6/03 8:32 AM Page 100 ENGLISH Notices and Safety Instructions Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To prevent electric shock, match wide blade of plug to wide slot and fully insert.
00659A SCD27/D29 SEA-SAFETY 5/6/03 8:32 AM Page 101 ENGLISH Notices and Safety Instructions 9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
00659A SCD27/D29 SEA-SAFETY 5/6/03 8:32 AM Page 102 ENGLISH Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm o when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and power-line surges. 15.
00659A SCD27/D29 SEA-SAFETY 5/6/03 8:32 AM Page 103 ENGLISH Notices and Safety Instructions 22. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. 23. If this power supply is used at 240V ac, a suitable plug adapter should be use.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 2 ENGLISH Contents Notes and Safety Instructions Getting to Know Your Camcorder 6 11 Features ...................................................................................................................................................................................................................... 11 Accessories Supplied with camcorder .............................................................................................................
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 3 ENGLISH Contents Playing back a tape you have recorded on the LCD ................................................................................................................................................ 33 Adjusting the LCD during PLAY ........................................................................................................................................................................... 34 Controlling Sound from the Speaker ...
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 4 ENGLISH Contents Searching for a PHOTO picture ........................................................................................................................................................................... 63 NITE PIX (0 lux recording)...........................................................................................................................................................................................64 POWER NITE PIX.....
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 5 ENGLISH Contents Structure of folders and files on the Memory Stick (STILL IMAGE)..................................................................................................................... 83 Image Format ....................................................................................................................................................................................................... 83 Selecting the CAMCORDER mode ..........
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 6 ENGLISH Notes and Safety Instructions Notes regarding the rotation of the LCD screen Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 6 1. LCD screen closed. 1 2. Standard recording using the LCD screen. 2 3. Recording when looking at the LCD screen from the top. 3 4. Recording when looking at the LCD screen from the front. 4 5.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 7 ENGLISH Notes and Safety Instructions Notices regarding COPYRIGHT Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. Notes regarding moisture condensation 1. A sudden rise in atmospheric temperature may cause condensation to form inside the camcorder.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 8 ENGLISH Notes and Safety Instructions Notes regarding the battery pack - Make sure that the battery pack is fully charged before starting to record. - To preserve battery power, keep your camcorder turned off when you are not operating it.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 9 ENGLISH Notes and Safety Instructions Note regarding the LENS - Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device). Notes regarding electronic viewfinder 1. Do not position the camcorder such that the viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the viewfinder.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 10 ENGLISH Notes and Safety Instructions Precautions regarding the Lithium battery 1. The lithium battery maintains the clock function and user settings; even if the battery pack or AC adapter is removed. 2. The lithium battery for the camcorder lasts about 6 months under normal operation from time of installation. 3.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 11 ENGLISH Getting to Know Your Camcorder Features • Digital data transfer function with IEEE1394 By incorporating the IEEE 1394 (i.LINK™ : i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit various images.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 12 ENGLISH Getting to Know Your Camcorder Accessories Supplied with camcorder Make sure that the following basic accessories are supplied with your digital video camera. 1. Lithium Ion Battery pack 2. AC Power Adapter (AD43-00070A) (AD44-00065A) 3. AC cord (AD39-00076A) 4. AUDIO/VIDEO cable (AD39-00001A) 5. S-VIDEO cable (AC39-42001Z) 6. Instruction Book 7. Lithium battery (AD43-10130H) 8. Shoulder strap (AD63-00202B) 9.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 13 ENGLISH Getting to Know Your Camcorder Front & Left View 1. Internal MIC 5. Viewfinder 2. Lens 6. TFT LCD monitor 3. Video Light 4. Remote sensor 7. IR Light 1. Internal MIC 5. Viewfinder (see page 32) 2. Lens 6. TFT LCD monitor 3. Video Light 7. IR(Infrared) Light 4.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 14 ENGLISH Getting to Know Your Camcorder Left Side View 2. PB zoom 3. EASY.Q 1. Function buttons 7. MENU button 8. MENU/VOL/MF dial 9 ENTER button 4. Mode switch 10. DC jack 5. V. light 11. DV jack 6. Display 12. Speaker 1. Function buttons 14 PLAYER CAMERA - EASY M.PLAY MULTI. : (REW) REC SEARCH – REV : (FF) REC SEARCH + FWD : (PLAY/STILL) FADE SLIDE SHOW : (STOP) BLC - 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. PB zoom EASY.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 15 ENGLISH Getting to Know Your Camcorder Right & Top View 11. SLOW SHUTTER 1. Zoom lever 2. PHOTO button 10. NITE PIX switch 9. USB jack 8. S-VIDEO jack 3. START/STOP button 7. Audio/Video jack 6. External MIC in 4. Power switch 5. Hook for handstrap 1. Zoom lever 7. Audio/Video jack 2. PHOTO button (see page 63) 8. S-VIDEO jack 3. START/STOP button 9. USB jack 4. Power switch (CAMERA or PLAYER) 10. NITE PIX switch 5.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 16 ENGLISH Getting to Know Your Camcorder Rear & Bottom View 8. Memory Stick slot 7. Tripod receptacle 1. Battery Release 2. Lithium battery cover 3. Charging indicator 4. Hook for shoulder strap 6. Focus adjust knob 5. TAPE OPEN / EJECT 16 1. Battery Release 5. TAPE OPEN / EJECT 2. Lithium battery cover 6. Focus adjust knob 3. Charging indicator 7. Tripod receptacle 4. Hook for shoulder strap 8.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 17 ENGLISH Getting to Know Your Camcorder Remote control 18. DISPLAY 1. PHOTO 2. START/STOP 3. SELF TIMER 4. ZERO MEMORY 5. PHOTO SEARCH 6. A.DUB 7. (FF) 8. (REW) 9. (PLAY) 17. Zoom 16. X2 15. DATE/TIME 14. (SLOW) 13. (STILL) 12. (STOP) 11. F. ADV 10. Direction 1. 2. 3. 4. 5. 6. 7. 8. 9. PHOTO START/STOP SELF TIMER (see page 20) ZERO MEMORY (see page 72) PHOTO Search A.DUB (see page 61) (FF) (REW) (PLAY) 10. Direction ( , ) 11. F.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 18 ENGLISH Getting to Know Your Camcorder OSD (On Screen Display in CAMERA and PLAYER modes) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 19 ENGLISH Getting to Know Your Camcorder OSD (On Screen Display in M.REC/M.PLAY modes) A. Folder number-file number (see page 82) B. Image counter - Current still image/Total number of recordable still images. C. CARD (MEMORY STICK) indicator D. Image recording and loading indicator E. Quality F. ERASE PROTECTION indicator (see page 89) G. Print Mark (see page 88) H. SLIDE SHOW I. MPEG4 SCREEN SIZE OSD in M.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 20 ENGLISH Preparation How to use the Remote Control Battery Installation for the Remote Control ✤ You need to insert or replace the lithium battery when : - You purchase the camcorder. - The remote control doesn’t work. ✤ Ensure that you insert the lithium cell correctly, following the + and - markings. ✤ Be careful not to reverse the polarity of the battery.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 21 ENGLISH Preparation Lithium Battery Installation ✤ The lithium battery maintains the clock function and preset contents of the memory; even if the battery pack or AC power adapter is removed. ✤ The lithium battery for the camcorder lasts about 6 months under normal operation from the time of installation. ✤ When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds when you set the power switch to CAMERA.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 22 ENGLISH Preparation Adjusting the Hand Strap It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording. The hand strap enables you to : - Hold the camcorder in a stable, comfortable position. - Press the Zoom and START/STOP button without having to change the position of your hand. Hand strap a. Pull open the Hand Strap cover and release the Hand Strap. b.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 23 ENGLISH Preparation Connecting a Power Source There are two types of power source that can be connected to your camcorder. - The AC Power Adapter and AC cord : used for indoor recording. - The Battery Pack : used for outdoor recording. To use the AC Power adapter and DC Cable 1. Connect the AC Power adapter to the AC cord. 2. Connect the AC cord to a wall socket. Reference The plug and wall socket type may differ according to your resident country. 3.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 24 ENGLISH Preparation Using the Lithium Ion Battery Pack ✤ The amount of continuous recording time available depends on : - The type and capacity of the battery pack you are using. - How often the Zoom function is used. It is recommended that you have several batteries available. Charging the Lithium Ion Battery Pack 1. Attach the battery pack to the camcorder. 2. Connect the AC Power adapter to an AC cord and connect the AC cord to a wall socket. 3.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 25 ENGLISH Preparation Using the Lithium Ion Battery Pack Table of continuous recording time based on model and battery type. ✤ If you close the LCD screen, it switches off and the viewfinder switches on automatically. ✤ The continuous recording times given in the table above are approximations. Actual recording time depends on usage. Time Continuous recording time Charging time LCD ON Viewfinder ON SB-L110 Approx. 2hr Approx. 1hr 30min Approx.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 26 ENGLISH Preparation Battery level display • The battery level display indicates the amount of power remaining in the battery pack. a a. b. c. d. e. Fully charged 20~40% used 40~80% used 80~95% used Completely used (flickers) (The camcorder will turn off soon, change the battery as soon as possible) ✤ Please refer to the table on page 25 for approximate continuous recording times.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:30 AM Page 27 ENGLISH Preparation Inserting and Ejecting a Cassette ✤ When inserting a tape or closing a cassette holder, do not apply excessive force. This may cause a malfunction. ✤ Do not use any tapes other than Mini DV cassettes. 1. Connect a power source and slide the TAPE OPEN/EJECT switch and open the cassette door. 1 - The cassette holding mechanism rises automatically. 2.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 28 ENGLISH Basic Recording Making your First Recording 1. Connect a Power source to the camcorder. (see page 23) (A battery pack or a AC power adapter) ■ Insert a cassette. (see page 27) 1 2 2. Remove the LENS CAP and hook it onto the hand strap. 3. Set the power switch to the CAMERA position. ■ Open the LCD monitor. ■ Set the mode switch to the TAPE position. Make sure that STBY is displayed.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 29 ENGLISH Basic Recording When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAMERA. This Auto Power off feature is designed to save battery power. Record Search (REC SEARCH) ✤ You can view a recording using the REC SEARCH +, -- function in STBY mode.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 30 ENGLISH Basic Recording Hints for Stable Image Recording ■ ■ While recording, it is very important to hold the camcorder correctly. Fix the LENS cap firmly by clipping it to the hand strap. (refer to the figure) Recording with the LCD monitor 1. Hold the camcorder firmly using the hand strap. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD to support and adjust it. Do not touch the built-in microphone. 4.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 31 ENGLISH Basic Recording Adjusting the LCD ✤ Your camcorder is equipped with a 3.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. ✤ Depending on the conditions under which you are using the camcorder (indoors or outdoors for example), you can adjust ; ■ BRIGHT SELECT ■ BRIGHT ADJUST ■ COLOR ADJUST 1. Set the POWER switch to CAMERA position.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 32 ENGLISH Basic Recording 8. Press the ENTER button again. ■ You may select NORMAL or SUPER in the BRIGHT SELECT feature and press the ENTER button to save the setting. ■ Use the MENU DIAL to adjust the value of BRIGHT ADJUST and COLOR ADJUST. ■ You can set values for BRIGHT ADJUST between 00 ~ 35 and COLOR ADJUST between 00 ~ 35. 9. Press the MENU button to finish the setting. Using the VIEWFINDER ✤ The VIEWFINDER will not work when the LCD is open.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 33 ENGLISH Basic Recording Playing back a tape you have recorded on the LCD ✤ You can monitor the playback picture on the LCD monitor. ✤ Make sure that the battery pack is in place. 1. Hold down the power switch tab and turn it to the PLAYER position. 2. Insert the tape you wish to view. (see page 27) 1 2 3. Open the LCD screen. Adjust the angle of the LCD screen and set the brightness or color if necessary. 4.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 34 ENGLISH Basic Recording Adjusting the LCD during PLAY ✤ You can adjust the LCD during playback. ✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 31) Controlling Sound from the Speaker The Speaker works in PLAYER mode only. 2 ■ When you use the LCD screen for playback, you can hear the recorded sound from the built-in Speaker. - Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 35 ENGLISH Advanced Recording Use of various Functions ● Setting menu items MENU SUB MENU Available mode Memory REC. ✔ ✔ ✔ ✔ CAMERA PLAYER INITIAL CLOCK SET WL.REMOTE DEMO ✔ ✔ ✔ CAMERA PROGRAM AE WHT. BALANCE D. ZOOM DIS DSE SELECT ✔ ✔ ✔ ✔ ✔ A/V REC MODE PHOTO SEARCH PHOTO COPY AUDIO MODE AUDIO SELECT WIND CUT PB DSE AV IN/OUT ✔ ✔ ✔ MEMORY M.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 36 ENGLISH Advanced Recording ● Availability of functions in each mode Operating Mode Requested Mode Digital functions DIS D.ZOOM O DIS D.ZOOM O PHOTO ✕ SLOW SHUTTER PHOTO (TAPE) O O ✕ SLOW SHUTTER * ✕ ✕ O Digital Special Effects O O O O NITE PIX O O O O Digital special effects NITE PIX O O O O ✕ O O O ✕ O : The requested mode will work in this operating mode. ✕ : You can not change the requested mode.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 37 ENGLISH Advanced Recording ● CLOCK SET ✤ CLOCK setup works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ The DATE/TIME is automatically recorded onto a tape. Before recording, please set the DATE/TIME. 1. Press the MENU button. ■ The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the ENTER button. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET WL. REMOTE DEMO 3.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 38 ENGLISH Advanced Recording ● REMOCON ✤ The REMOCON function works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ The REMOCON option allows you to enable or disable the remote control for use with the camcorder. 1. Press the MENU button. ■ The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the ENTER button. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET WL. REMOTE DEMO 3. Use the MENU DIAL to select WL.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 39 ENGLISH Advanced Recording ● DEMONSTRATION ✤ Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. ✤ The DEMONSTRATION function may only be used in the CAMERA mode without a tape inserted in the camcorder. ✤ The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 40 ENGLISH Advanced Recording ● PROGRAM AE ✤ The PROGRAM AE function works in CAMERA mode only. ✤ The PROGRAM AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. ✤ They give you creative control over the depth of field. ■ AUTO mode - Auto balance between the subject and the background. - To be used in normal conditions.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 41 ENGLISH Advanced Recording Setting the PROGRAM AE 1. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER 2. Turn the MENU DIAL to highlight CAMERA and press the ENTER button. PROGRAM AE WHT. BALANCE D.ZOOM DIS DSE SELECT 3. Select PROGRAM AE from the submenu. 4. Press the ENTER button to enter the submenu. CAM MODE 5. Using the MENU DIAL, select the PROGRAM AE mode.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 42 ENGLISH Advanced Recording ● WHT. BALANCE (WHITE BALANCE) ✤ The WHITE BALANCE function works in CAMERA or M.REC mode only. ✤ The WHITE BALANCE is a recording function that preserves the unique color of the object in any recording condition. ✤ You may select the appropriate WHITE BALANCE mode to obtain good quality color of the image. ■ AUTO ( ) : This mode is generally used to control the WHITE BALANCE automatically.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 43 ENGLISH Advanced Recording Zooming In and Out with DIGITAL ZOOM ✤ Zoom works in CAMERA mode only. Zooming In and Out ✤ Zooming is a recording technique that lets you change the size of the subject in a scene. For more professional looking recordings, do not use the zoom function too often. ✤ You can zoom using variable zoom speeds. ✤ Use these features for different shots.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 44 ENGLISH Advanced Recording Digital Zoom ✤ Zooming more than 10x is achieved digitally. ✤ The picture quality may deteriorate depending on how much you zoom in on the subject. ✤ We recommend that you use the DIS feature with DIGITAL ZOOM for picture stability. (see page 45) 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER PROGRAM AE WHT. BALANCE D.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 45 ENGLISH Advanced Recording ● DIS (Digital Image Stabilizer) ✤ The DIS function works in CAMERA mode only. ✤ DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits).
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 46 ENGLISH Advanced Recording ● DSE(Digital Special Effects) SELECT ✤ ✤ ✤ ✤ The DSE function works in CAMERA mode only. The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 9 DSE modes. a. ART mode This mode gives the images a coarse effect. a b c d e f g h b.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 47 ENGLISH Advanced Recording Selecting an effect 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER PROGRAM AE WHT. BALANCE D.ZOOM DIS DSE SELECT 3. Turn the MENU DIAL to highlight CAMERA and press the ENTER button. 4. Select DSE SELECT from the submenu. CAM MODE 5. Press the ENTER button to enter the submenu. 6. Using MENU DIAL, select the DSE mode.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 48 ENGLISH Advanced Recording ● REC MODE ✤ The REC MODE function works in both CAMERA and PLAYER(DV IN) modes. ✤ This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. ■ SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape. ■ LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape. ■ See AV in/out select on page 75. CAM MODE 1.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 49 ENGLISH Advanced Recording ● AUDIO MODE ✤ The AUDIO MODE function works in CAMERA mode. ✤ This camcorder records sound in two ways. (12bit, 16bit) ■ 12bit : You can record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the MAIN (SOUND1) track. Additional stereo sound can be dubbed onto the SUB (SOUND2) track. ■ 16bit : You can record one high quality stereo sound using the 16bit recording mode.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 50 ENGLISH Advanced Recording ● WIND CUT ✤ The WIND CUT function works in CAMERA, PLAYER mode. ✤ The WIND CUT function minimizes wind noise or other noise while recording. - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER 3.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 51 ENGLISH Advanced Recording ● DATE/TIME ✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ The date and time are automatically recorded on a special data area of the tape. 1. Press the MENU button. ■ The menu list will appear. 2. Turn the MENU DIAL to highlight VIEWER and press the ENTER button. 3. Turn the MENU DIAL to highlight DATE/TIME. 4. Press the ENTER button to select the sub-menu. 5.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 52 ENGLISH Advanced Recording ● TV DISPLAY ✤ The TV DISPLAY function works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ You can select the output path of the OSD (On Screen Display). ■ OFF: The OSD appears in the LCD screen only. ■ ON: The OSD appears in the LCD screen, Viewfinder and TV. ■ Use the DISPLAY button located at the left side of the camcorder to turn ON/OFF all of the OSD displayed on the LCD/Viewfinder/TV. 1.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 53 ENGLISH Advanced Recording Using Quick Menu(Navigation Menu) ✤ Quick menu is available only in CAMERA mode. ✤ Quick menu is used to adjust camera functions by simply using the MENU SELECTOR button. This feature is useful for when you want to make simple adjustments without having to access the menus and submenus.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 54 ENGLISH Advanced Recording ■ WHT. BALANCE (see page 42) - Each time you select WHT. BALANCE and press the ENTER button, you can choose between preset WHT.BALANCE values and AUTO. As in PROGRAM AE, you can't choose between Auto and WHT.BALANCE values it they have not been preset.. ■ FOCUS (Manual Focus/Auto Focus) (see page 58) - Each time you select FOCUS and press the ENTER button, the FOCUS is switched to either Manual Focus (MF) or Auto Focus ( ).
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 55 ENGLISH Advanced Recording SHUTTER SPEED & EXPOSURE ✤ You can set SHUTTER SPEED and EXPOSURE only in CAMERA mode. ✤ SHUTTER SPEED and EXPOSURE values can only be set in the Quick Menu. ✤ SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated. 1. Set the power switch to CAMERA mode. 2. Turn the MENU DIAL until you see icon( ) on, and then press the ENTER button. ■ You see a screen on which you can select SHUTTER SPEED and EXPOSURE.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 56 ENGLISH Advanced Recording SLOW SHUTTER (Low Shutter Speed) ✤ The SLOW SHUTTER function works in CAMERA mode only. ✤ The shutter speed can be controlled, allowing you to record slow moving objects. 1. Set the power switch to CAMERA mode. 2. Press the SLOW SHUTTER button. 3. Each time you press the SLOW SHUTTER button, SHUTTER SPEED is changed to 1/30, 1/15, 1/8, off. 4. To exit, press the SLOW SHUTTER button.
00659A SCD27/D29 SEA (28~57) 5/6/03 8:30 AM Page 57 ENGLISH Advanced Recording EASY Mode (for Beginners) ✤ The EASY mode allows a beginner to easily make good recordings. ■ The EASY mode only operates in CAMERA mode. 1. Set the power switch to CAMERA mode. 2. By pressing the EASY button, all functions on the camera will be set to off and the recording settings will be set to the following basic modes: ■ Battery level, recording mode, counter, DATE/TIME, and DIS ( ) will be displayed. ■ The word “EASY.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 58 ENGLISH Advanced Recording MF/AF (Manual Focus/Auto Focus) ✤ The MF/AF function works in CAMERA, M.REC mode only. ✤ In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. ✤ Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 59 ENGLISH Advanced Recording BLC (Back Light Compensation) ✤ BLC works in CAMERA/M.REC mode. ✤ Back lighting exists when the subject is darker than the background: ■ The subject is in front of a window. ■ The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the person’s face is too dark to distinguish his/her features. ■ The subject is outdoors and the background is overcast.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 60 ENGLISH Advanced Recording Fade In and Out ✤ The FADE function works in CAMERA mode only. ✤ You can give your recordings a professional look by using special effects such as fading in at the beginning of a sequence or fading out at the end of a sequence. FADE To Start Recording 1. Before recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 2.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 61 ENGLISH Advanced Recording Audio dubbing ✤ ✤ ✤ ✤ The AUDIO DUBBING function only works in PLAYER Mode. You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound. Use the internal and external microphones or other audio equipment. The original sound will not be erased. Dubbing sound 1. Set the camcorder to PLAYER mode.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 62 ENGLISH Advanced Recording Dubbed audio Playback 1. Insert the dubbed tape and press MENU button. 2. Turn the MENU DIAL to highlight A/V. PLAYER MODE 3. Press the ENTER button to enter the sub-menu. 4. Use the MENU DIAL to select AUDIO SELECT from the submenu. 5. Press the ENTER button to enter the sub-menu. 6. Using the MENU DIAL, select the AUDIO playback channel. ■ Press the ENTER button to confirm the audio playback channel.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 63 ENGLISH Advanced Recording PHOTO Image Recording 1. Press the PHOTO button and hold it. ■ The still picture appears on the LCD monitor. ■ If you do not wish to record, release the button. 2. Release the PHOTO button and press the PHOTO button again in 2 seconds. ■ The still picture is recorded for about 6~7 seconds. 3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 64 ENGLISH Advanced Recording NITE PIX (0 lux recording) ✤ The NITE PIX function works in CAMERA/M.REC mode. ✤ The NITE PIX function enables you to record a subject in darkness. 1. Set the camcorder to CAMERA or M.REC mode. 2. Slide the NITE PIX switch to ON. ■ (NITE PIX indicator) appears on the LCD monitor. ■ The infrared(invisible rays) light is turned on automatically. 3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 65 ENGLISH Advanced Recording POWER NITE PIX ✤ The POWER NITE PIX function works in CAMERA mode. ✤ The POWER NITE PIX function can record a subject more brightly in darkness than the NITE PIX function. ✤ A POWER NITE PIX is displayed for three seconds by LCD if you press a SLOW SHUTTER button in state that a NITE PIX switch is turned on. ✤ When you work in POWER NITE PIX mode, POWER NITE PIX icon appears on the LCD continuously. 1.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 66 ENGLISH Advanced Recording Using the VIDEO LIGHT ✤ VIDEO LIGHT works in CAMERA or M.REC mode only. ✤ To brighten the scene when natural lighting is too dim. ✤ VIDEO LIGHT works in SP mode only. - If you turn on the LIGHT in LP mode, the LIGHT indicator and “LP” will be blinking on the LCD. DANGER ■ ■ ■ ■ The VIDEO LIGHT can become extremely hot.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 67 ENGLISH Advanced Recording Various Recording Techniques ✤ In some situations different recording techniques may be required for more dramatic results. Note Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. General recording. 1 2 3 4 2. Downward recording. Making a recording with a top view of the LCD screen. 3. Upward recording.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 68 ENGLISH Playback Tape Playback ✤ The playback function works in PLAYER mode only. Playback on the LCD ✤ It is practical to view a tape using the LCD when in a car or outdoors. Playback on a TV monitor ✤ To play back a tape, the television must have a compatible color system. ✤ We recommend that you use the AC Power Adapter as the power source for the camcorder. Connecting to a TV which has Audio/Video input jacks 1.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 69 ENGLISH Playback Connecting to a TV which has no Audio and Video input jacks ✤ You can connect your camcorder to a TV through a VCR. 1. Connect the camcorder and VCR with the Audio/Video cable. ■ The yellow plug : Video ■ The white plug : Audio(L) ■ The red plug : Audio(R) - STEREO only 2. Connect a TV to the VCR. 3. Set the power switch on the camcorder to PLAYER mode. 4. Turn on both the TV and VCR. ■ Set the input selector on the VCR to LINE.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 70 ENGLISH Playback Various Functions while in PLAYER mode ✤ The PLAY/STILL, STOP, FF, REW buttons are located on the camcorder and the Remote Control. ✤ The F.ADV(Frame advance), X2, SLOW buttons are located on the Remote Control only. ✤ To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more than 5 minutes. Playback pause ✤ Press the (PLAY/STILL) button during Playback.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 71 ENGLISH Playback Frame advance (To play back frame by frame) ● Press the F.ADV button on the Remote Control while in Still mode. The F.ADV function works in still mode only. ● To resume normal playback, press the (PLAY/STILL) button. ✤ Forward frame advance ■ Press the F.ADV button on the remote control in Still mode. ✤ Reverse frame advance ■ Press (_) the button on the remote control to change the direction in F.ADV mode. ■ Press the F.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 72 ENGLISH Playback ZERO MEMORY ✤ The MEMORY function works in both CAMERA and PLAYER modes. ✤ You can mark a point on a tape that you want to return to following playback. 1. Press the ZERO MEMORY button on the remote control during playback or recording at the point you wish to return to.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 73 ENGLISH Playback PB DSE (Playback Digital Special Effects) ✤ The PB DSE function works in PLAYER mode. ✤ The PB DSE function enables you to apply Digital Special Effect (DSE) to tape playback or still images. 1. Set the camcorder to the PLAYER mode and then Playback a tape. PLAYER MODE 2. Press the MENU button and turn the MENU DIAL to highlight A/V. 3. Press the ENTER button to enter the sub-menu. INITIAL CAMERA A/V MEMORY VIEWER 4.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 74 ENGLISH Playback PB ZOOM ✤ The PB ZOOM function works in PLAYER mode. ✤ The PB ZOOM function enables you to magnify playback or still image. 1. Press the PB ZOOM button in playback mode or in playback still mode 2. The image is magnified starting from the center of image and the four arrows which allows you to move the image in the four directions appear. 3. You can zoom in from 1.2x to 8.0x by moving the zoom lever. 4.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 75 ENGLISH Recording in PLAYER mode Recording in PLAYER mode ✤ You can use this camcorder as a recorder. ✤ You can record a tape from VCR or TV. 1. Connect the camcorder and VCR or TV with the Audio/Video cable. 2. Set the power switch of the camcorder to PLAYER mode. VCR VIDEO AUDIO(L) AUDIO(R) S-VIDEO 3. Turn on the VCR or TV. S-VIDEO 4. Insert the blank tape with protection tab closed into the camcorder.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 76 ENGLISH IEEE 1394 Data Transfer Transferring IEEE1394 (i.LINK)-DV standard data connections Connecting to a DV device ✤ Connecting with other DV standard products. ■ A standard DV connection is quite simple. If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable. !!! Please be careful since there are two types of DV ports, (4pin, 6pin). This camcorder has a 4pin terminal.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 77 ENGLISH IEEE 1394 Data Transfer ● System requirements ■ ■ ■ ■ CPU : faster Intel® Pentium III™ 450Mhz compatible. Operating system : Windows® 98SE, ME, XP, Mac OS (9.1~10.2) Main memory : more than 64 MB RAM IEEE1394 add-on card or built in IEEE1394 card Recording with a DV connection cable 1. Set the power switch to PLAYER mode. 2.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 78 ENGLISH USB interface ● Transferring a Digital Image through a USB Connection ✤ You can easily transfer a still image from a MEMORY STICK to a PC without additional add-on cards via a USB connection. ✤ You can transfer an image to a PC via a USB connection. ✤ If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the camcorder.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 79 ENGLISH USB interface Installing DVC Media 5.0 Program ✤ Do not connect the camcorder to PC before installing the program. ✤ If another camera or scanner is connected, please disconnect it in advance. ✤ This explanation is based on Windows® 98SE OS. Program installation 1. Insert the software CD into CD-ROM drive. 1. - Installation selection screen appears in the monitor. 2.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 80 ENGLISH USB interface Connecting to a PC 1. Connect a USB cable to the USB port on the PC. 2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack) Disconnecting the USB cable ✤ After completing the data transmission, you must disconnect the cable in the following way: 1. Select the removable disc icon and click the right mouse button to select [Eject]. 2.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 81 ENGLISH Digital Still Camera mode MEMORY STICK (SCD29 only) ✤ The Memory Stick stores and manages still images recorded by the camera.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 82 ENGLISH Digital Still Camera mode Inserting and ejecting the Memory Stick ● Inserting the Memory Stick 1. Turn the Power switch to OFF. 2. Insert the Memory Stick into the CARD slot located beneath the camcorder, in the direction of the arrow. ● 1. 2. 3. Ejecting the Memory Stick Turn the Power switch to OFF. Push the Memory Stick, then it comes out of the camcorder automatically. Pull out the Memory Stick.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 83 ENGLISH Digital Still Camera mode Structure of folders and files on the Memory Stick (STILL IMAGE) ✤ The still images that you recorded are saved in JPEG file format on the card. ✤ Each file has a file number and all files are assigned to a folder. ■ A file number from DCAM0001 to DCAM9999 is sequentially assigned to each recorded image. ■ Each folder is numbered from 100SSDVC to 999SSDVC and recorded on the CARD. DCIM 100 SSDVC DCAM 0001 DCAM 0002 .
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 84 ENGLISH Digital Still Camera mode Selecting the image quality ✤ You can select the quality of a still image to be recorded. Select the image quality 1. Set the mode switch to MEMORY. 2. Set the power switch to the CAMERA mode. 3. Press the MENU button. ■ The menu list will appear. 4. Turn the MENU DIAL to highlight MEMORY. 5. Press the ENTER button to enter the sub-menu. 6. Turn the MENU DIAL to highlight QUALITY in the submenu. 7.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 85 ENGLISH Digital Still Camera mode Recording Still images to a Memory Stick in M.REC Mode. ✤ Audio cannot be recorded with still images onto the Memory Stick. Recording images to a Memory Stick 1. Set the mode switch to MEMORY. 2. Set the power switch to CAMERA. 3. Press the PHOTO button and hold it. ■ The still picture appears on the LCD monitor. ■ If you do not wish to record, release the button and wait for more than 2 seconds. 4.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 86 ENGLISH Digital Still Camera mode Recording an image from a cassette as a still image. ✤ You can record a still image from a cassette onto a Memory Stick. ✤ If you want to recorded multiple still images from a cassette to a Memory Stick, use the COPY function. 1. Set the mode switch to TAPE. 2. Set the power switch to PLAYER mode. 3. Play back the cassette. 4. Press the PHOTO button and hold it. ■ The camcorder is set to playback pause(STILL) mode.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 87 ENGLISH Digital Still Camera mode Viewing Still images ✤ You can playback and view still images recorded on the Memory Stick. ✤ There are 2 ways to view recorded images. ■ Single : To view an image frame by frame. ■ Slide show : To view all images automatically and in consecutive order. To view a Single image 1. Set the mode switch to MEMORY. 2. Set the power switch to PLAYER mode. ■ The last recorded image appears.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 88 ENGLISH Digital Still Camera mode To view the Multi Screen 1. Set the mode switch to MEMORY. 001 2. Set the power switch to PLAYER mode. ■ The last recorded image appears. 3. To view six stored images on single screen, press the MULTI button. ■ A selection mark ( ) appears under the image. ■ Turn the menu dial to select a image. 4. To return to single playback mode, press the MULTI button again.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 89 ENGLISH Digital Still Camera mode Copying still images from a cassette to Memory Stick ✤ You can copy still images recorded with PHOTO function on a cassette onto a Memory Stick. 1. Set the power switch to the PLAYER mode. PLAYER MODE 2. Press the MENU button. 3. Turn the MENU DIAL to highlight A/V and press the ENTER button. ■ The submenu will appear. 4. Turn the MENU DIAL to highlight PHOTO COPY and press the ENTER button.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 90 ENGLISH Digital Still Camera mode Marking images for printing ✤ This camcorder supports the DPOF (Digital Print Order Format) print format. ✤ You can automatically print images recorded on a Memory Stick with a printer supporting DPOF. ✤ There are 2 ways to make a PRINT MARK. ■ THIS FILE : You can set a print mark on the photo image displayed on the LCD. ■ ALL FILES : To print 1 copy each of all of the stored images. 1. Set the mode switch to MEMORY.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 91 ENGLISH Digital Still Camera mode Protection from accidental erasure ✤ You can protect important images from accidental erasure. ■ If you execute FORMAT, all images including protected images will be erased. 1. Set the mode switch to MEMORY. 2. Set the power switch to PLAYER. ■ The last recorded image appears. ■ If there are no recorded images on the Memory Stick, NO STORED PHOTO! or NO STORED MPEG4! and will display on the screen. 3.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 92 ENGLISH Digital Still Camera mode Deleting Still images ✤ You can erase the still images recorded on the Memory Stick. ✤ If you want to delete protected images, you must first deactivate the image protection. ✤ An image which has been deleted cannot be recovered. 1. Set the mode switch to MEMORY. 2. Set the power switch to PLAYER. 3. Using the (FWD) and (REV) buttons, search for the still image that you want to delete. 4. Press the MENU button. 5.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 93 ENGLISH Digital Still Camera mode Formatting the Memory Stick ✤ You can use the MEMORY FORMAT functions to completely delete all images and options on the Memory Stick, including protected images. ✤ The format function restores the Memory Stick to its initial state. ✤ The Memory Stick supplied with this camcorder has been formatted already.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 94 ENGLISH Digital Still Camera mode MPEG4 REC ✤ MPEG4 REC MODE is able to store audio and video on a MEMORY STICK. ✤ You can record 10 ~ 20 seconds continuously. Recording the moving picture images onto the MEMORY STICK 1. Check whether MEMORY STICK is inserted into the camcorder. If it is not in the camcorder, insert it into the slot. 2. Set the MODE SWITCH to MEMORY. 3. Set the POWER SWITCH to CAMERA. 4. Press START/STOP button to start recording. 5.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 95 ENGLISH Digital Still Camera mode MPEG4 Playback ✤ MPEG4 PB mode is able to play the recorded MPEG4 images on the MEMORY STICK. 1. 2. 3. 4. 5. 6. 7. 8. Set the MODE switch to MEMORY. Set the POWER switch to PLAYER. Press the Menu button, turn the MENU DIAL to highlight MEMORY. Press the ENTER button to enter sub menu. Use the MENU DIAL to select M. PLAY from the sub menu. Press the Enter button to enter sub menu.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 96 ENGLISH Maintenance After finishing a recording ✤ At the end of a recording you must remove the power source. ✤ When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder. 1. Slide the TAPE OPEN/EJECT switch in the direction of the arrow. ■ Opening the cassette door ejects the tape automatically.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 97 ENGLISH Maintenance Cleaning and Maintaining the Camcorder Cleaning the Video Heads To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped noise or distortion, or a blue screen appears. 1. 2. 3. 4. Set the power switch to PLAYER mode. Insert the cleaning tape. Press the (PLAY/STILL) button. Press the (STOP) button after 10 seconds.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 98 ENGLISH Maintenance Using Your Camcorder Abroad ✤ Each country or region has its own electric and color systems. ✤ Before using your camcorder abroad, check the following items. Power sources ■ You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V, 50/60 Hz. ■ Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 99 ENGLISH Troubleshooting Troubleshooting ✤ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self Diagnosis Display Display Blinking Informs that... Action slow the battery pack is almost discharged. Change to a charged one. TAPE END! slow When the remaining time on the tape is about 2 minutes Prepare a new one.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 100 ENGLISH Troubleshooting Self Diagnosis Display in M.REC/M.PLAY mode Display 100 Blinking Informs that... Action MEMORY STICK! slow There no Memory stick in the camcorder. Insert a Memory Stick. MEMORY FULL! slow There is not enough memory to record. Change to a new Memory Stick. Erase recorded image. NO STORED PHOTO! or NO STORED MPEG4! slow There are no images recorded on the Memory Stick. Record new images.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 101 ENGLISH Troubleshooting ✤ If these instructions do not solve your problem, contact your nearest Samsung authorized service center. Symptom Explanation/Solution You cannot switch the Check the battery pack or the AC Power Adapter. camcorder on. START/STOP button does not operate while recording. Check the POWER switch is set to CAMERA. You have reached the end of the cassette. Check the record protection tab on the cassette.
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 102 ENGLISH Specifications Model name: SCD27/D29 System Video signal Video recording system Audio recording system Usable cassette Tape speed Tape recording time FF/REW time Image device Lens Filter diameter LCD monitor/Viewfinder Size/dot number LCD monitor Method Viewfinder Connectors Video output S-video output Audio output DV input/output USB output External mic NTSC 2 rotary heads, Helical scanning system Rotary heads, PCM system Digital video tape
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 103 ENGLISH INDEX -A- -M- Accessories ............................................................................................... 12 Audio dubbing ............................................................................................ 61 AUDIO MODE ........................................................................................... 49 Memory Stick .......................................................................................
00659A SCD27/D29 SEA (58~100) 5/6/03 8:31 AM Page 104 ENGLISH Warranty SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option.
00659A SCD27/D29 SEA (01~27) 5/6/03 8:32 AM Page 100 ENGLISH THIS CAMCORDER IS MANUFACTURED BY: ELECTRONICS SERVICE DIVISION 400 Valley Road, Suite 201, Mt. Arlington N.J. 07856 Tel: 1-800-SAMSUNG (1-800-726-7864) *Samsung Electronics’ Internet Home Page http://www.samsungusa.