[ENGLISH] Digital Video Camcorder SCD5000 Minl[_rD_c_sset_vi_eo AF CCD LCD Auto Focus Charge Coupled Device iiiiiiSiiiiiiiiiiiiiii .... Liquid Crystal Display iiiiii;iiiiiiiiii!iii:;_: ; i;:_;!:_::_:::_: :¸:¸:::::::::::::::: :: ¸¸¸¸¸¸¸ :: Owner's Instruction Manual Before operating the unit, please read this instruction manual thoroughly, and retain it for future reference.
[ ENGLISH Notices and Safety Instructions [_lJi[*]_ RISK OFELECTRIC SHOCK DO NOT OPEN f_,_,, /_"_ _' This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of fire or electdc shock, CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).
I ENGLISH 1 Notices and Safety Instructions 9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating, These openings must not be blocked or covered, Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
I ENGLISH Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm o when it is left unattended and unused for long periodsof time, unplug it from the wall outiet and disconnect the antenna or cable system, This will prevent damage to the CAMCORDER due to lightning and power-line surges. 15.
I ENGLISH Notices and Safety Instructions 22. To prevent damage which may resaIt in fire or shock hazard, do not expose this applianca to rain or moisture. 23, If this power supply is used at 240V ac, a suitable plug adapter should be use.
[ ENGLISH Contents Precautions on Camcorder Care .................................................................................................................................................................................8 Quick Start .................................................................................................................................................................................................................... 9 Features .............................................
I ENGLISH 1 Contents Setting to CAMCORDER / CAMERA modes ............................................................................................................................................................30 Setting the Power Switch ..........................................................................................................................................................................................31 Adjusting the LCD ..............................................................
I ENGLISH Contents PROGRAM AE ....................................................................................................................................................................................................55 Setting PROGRAM AE ........................................................................................................................................................................................56 WHT. BALANCE (WHITE BALANCE) - CAMCORDER Mode .............................
I ENGLISH ] Contents Connecting to a TV which has No Audio and Video Input Jacks ........................................................................................................................78 Playback ...............................................................................................................................................................................................................78 Various Functions while in PLAYER Mode ................................................
[ ENGLISH FOCUS LOCK ............................................................................................................................................................................................................. DigitaI Zoom in CAMERA Mode ...............................................................................................................................................................................93 MACRO Mode ...................................................................
I ENGLISH 1 Transferring a Digital Image through a USB Connection ........................................................................................................................................116 System Requirements ..............................................................................................................................................................................................116 Installing the DVC Media 5,0 Program .....................................................
I ENGLISH Start ,A, •l. •l. Please note the following precautions for use: Please keep your device in a safe place. This device contains a lens that can be damaged by shock. Keep away from the reach of the children. • Do not place your device in a wet place. Moisture and water may cause the device to malfunction. • Do net aim the device at the sun while looking through the viewfinder; this may cause permanent damage to your eyes.
I ENGLISH 1 Start ,_ This device provides a variety of functions because it is a Camcorder and Digital Still Camera in one system. Please read this manual thoroughly. ,_ Before using the device, install the accessories in the following order: 1. Install the battery pack. 2. Insert the Memory Stick into the slot. 2 3. Charge the battery pack by connecting the power cable to the camcorder. 4. Set your device to CAMCORDER mode or CAMERA mode by flipping the lens body block. 5.
[ ENGLISH ] Notes and Safety Instructions Please rotate the LCD screen carefully as illustrated, Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder, 1. LCD screen closed. 2, Standard recording using the LCD screen. 180, 3. Recording when looking at the LCD screen from the left, 4. Recording when looking at the LCD screen from the front, 5. Recording with the LCD screen closed.
I ENGLISH ] Notes and Safety Instructions Television programs,video tapes, DVD titles, films, and other program materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. 1. A sudden rise in atmospheric temperature may cause moisture condensation to form inside the camcorder. For Examole: - When you take the camcorder from a cold place to a warm place(e.g. from outside to insideduring winter.) - When you take the camcorder from a cool place to a hot place (e.g.
I ENGLISH Notes and Safety Instructions - - - Make sure that the battery pack is fully charged before starting to record. To preserve battery power, keep your camcorder turned off when you are not operating it. If your device is in CAMCORDER mode with a tape installed, and it is left in STBY mode without being operated for more than 5 minutes it will automatically turn itself off to protect against unnecessary battery discharge. Make sure that the battery pack fits firmly into place.
J ENGLISH ] Notes and Safety Instructions - Do not film with the camera lens pointing directly at the sun, Direct sunlight can damage the CCD(Charge Coupled Device). Over-rotating of the LENS body block may damage it. 1. Do not position the camcorder such that the viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the viewfinder. Be careful when placing the camcorder under sunlight or near a window exposed to sunlight. 2. Do not pick up the camcorder by the viewfinder. 1.
[ ENGLISH ] Getting to Know Your Device • Digital data transfer function with IEEE1394 By incorporatingthe IEEE 1394 (i.LINK TM : LLINK is a serial data transferprotocol and interconnectivifysystem, used to transmit DV data) high speed data transport port,both moving and still images can be transferred to a PC, making it possible to produceor edit various images.
I ENGLISH Getting to Know Your Device Make sure that the following basic accessories are supplied with your digital video camera, I. Lithium Ion Battery pack 2. AC Power Adapter (AD4340112A_ AD434)0113A) (AD44-00065A) 3. AC cord (AD39-00076A) 4. AUDIONIDEO cable (AD39-O0099A) 5. Instruction Book (ADaS-0a0655B) 6. Lithium battery (AD43-10130H) 7. Shoulder strap 8. USB cable (AD39-00073A) 9. Software CD (AD46-00063A) 10. Remote Control (AD59-00100A) 11. Memory Stick (1109-001222) 12.
I ENGLISH Getting to Know Your Device 1. Internal MIC -- 8. Nite Pix -- 7. Slow Shutter 2. Memory Stick Slot 6. Battery release button 3. Remote Sensol -- 4. Lens A 1,1nternalMIC 5, Bakery 2, MemoryStick Slot 6, Ba_eryrelease button 3, Remote Control Sensor 7, Slow Shuffer 4, Lens 8, NitePix 5.
I ENGLISH Getting to Know Your Device 11. Rotation Release Button 14. Flash 13. NIGHTSCENEButton 10.TFT LCD Screen 12.MACRO Button _ 9.Focus Adjust Knob '1. Display 2. MF/AF 3. PB zoom 4. EasyButton 5. ExternalMIC/ Earphone 8. MENU Dial _ 7. MENU Button 6. Hookfor handstrep 8. MENU Dial 1, Display 2, MF/AF 3, PB Zoom 9. Focus Adjust knob 10. TFT LCD Screen 4, Easy Button 11. Rotation Release Button 5, External MIC / Earphone 12. MACRO Button 13.
I ENGLISH Getting to Know Your Device 5. Zoom Lever 1. PHOTO button 2. Viewfinder -- Stick Slot 3. START/STOP button 4. Power switch A 1. Photo Button 4, Power switch 2. Viewfinder 5, Zoom Lever 3.
I ENGLISH 1 Getting to Know Your Device 13. TAPE EJECT 2. Speaker -3.Hod_r_ 4. DV Jack -5. USB Jack. Jack 6. Charging Indicator 1, Function Button 4. DV Jack TAPE PLAY REC EASY 44 : (REW) 10. Night Scene 9. FLASH REC SEARCH- 5. USB Jack 6. Charging Indicator 7. DC Jack MI_ : (FF) REC SEARCH + 8. AV/S-Video I_111:(PLAY/STILL) FADE 9. FLASH • 8LC : (STOP) 2, Speaker 3, Hook for the shoulder strap 10. Night Scene Button 11. MACRO Button 12. Tripod Receptacle 13. TAPE EJECT 14.
I ENGLISH Getting to Know Your Device 12. TELE (F.ADV-) 1. START / STOP 11. WIDE (RADV +) 2. I I(STILL) 10. ZERO MEMORY 3, PHOTO 9. _ (PLAY) 4, <4 (REW) / RPS 8. _ (FF) / FPS 5, A.DUB 7. SELF TIMER 6.•(STOP) 1, START / STOP 7. SELF TIMER 2, II(STILL) 3, PHOTO 8. bb (FF) / FPS 9. II_ (PLAY) 10, ZERO MEMORY 4, 44 (REW) / RPS 5, A.DUB 6. • (STOP) ,A 11.
I ENGLISH 1 Getting to Know Your Device 1. 2. 3. 4. 5. 6. 7. 8. 9. f0. ff. f2. f3. _4. f5. f6. f7. 18. f9. 20. 2f. 22. 23. 24. 25. 26. 27. 28. 29. 30.
I ENGLISH Getting to Know Your Device I. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
I ENGLISH Getting to Know Your Device • Turning OSD ON/OFF Press the DISPLAY button. - Each press of the button toggles the OSD function ON and OFE - When you turn the OSD OFF, In CAMCORDER / CAMERA mode: The STBY, REC, EASY.Q modes are always displayed on the OSD, even when the OSD is turned OFE The key input is displayed for 3 seconds then turned off. In PLAYER mode: When you press any Function button, the function is displayed on the OSD for 3 seconds before it disappears.
[ ENGLISH ] Preparation -_ You need to insert or replace the lithium battery when : - You purchase the camcorder. - The remote control doesn't work. -_ Make sure that you insert the lithium cell correctly,following the + and - markings. -_ Be careful not to reverse the poladty of the battery. When you use the Self Timer function on the remote control, recording begins automatically in 10 seconds. 1. Set the device to CAMCORDER or CAMERA mode. 2.
I ENGLISH 1 Preparation It is very important to ensure that the Hand Strap has been correctly adjusted before you begin recording. The hand strap enables you to : - Hold the camcorder in a stable, comfortable position. - Press the Zoom START/STOP,and PHOTO button without having to change the position of your hand. a. Pull the Hand Strap cover open and release the Hand Strap. b. Adjust its length and stick it back into the Hand Strap cover. c. Close the Hand Strap cover.
I ENGLISH Preparation There are two typesof power sources that can be connected to your camcorder. - The AC Power Adapter with the AC cord : used for indoor recording. - The Battery Pack : used for outdoor recording, 1. Connect the AC Power adapter to the AC cord. 2. Connect the AC cord to a wall socket. The plug and waif socket type may differ according to your country of residence. 3. Connect the DC cable to the DC jack socket on the camcorder. 4.
I ENGLISH Preparation •:, The amount of continuous recording time available depends on : - The type and capacity of the battery pack you are using. - How often the Zoom function is used. It is recommended that you have several batteries available. _rg _ i_ _ 1. Attach the battery pack to the device. 2. Connect the AC Power adapter to the AC cord and connect the AC cord to a wall socket. 3. Connect the DC cable to the DC jack socket on the camcorder. 4.
ENGLISH ] Preparation If you close the LCD screen, it switches off and the viewfinder switches on automatically. The continuous recording times given in the table above are approximations. Actual recording time depends on usage. • • • • • • A Continuous recording time Charging time LCD ON EVF ON SB-L70G Approx. lhr 20min Approx. 58min Approx. lhr 2min SB-L110G Approx. lhr 40min Approx. lhr 3Omin Approx.
I ENGLISH 1 Preparation • The battery level display indicates the amount of power remaining in the battery pack, a a. FullyCharged b. 20~40% Used c, 40~80% Used d. 80~95% Used e. Completely Used (flickers) (The device will turn off soon, change the battery as soon as possible) ÷ Please refer to the table on page 28 for approximate continuous recording times. ÷ The recording time is affected by temperature and environmental conditions, The recording time becomes very short in a cold environment.
[ ENGLISH ] Preparation _, This device switches between the DVC (Digital Video Camcorder) mode and the DSC (Digital Still Camera) mode by revolving the Lens Body Block. _, Switching between CAMCORDER!CAMERA Modes • To set your device to CAMERA Mode from CAMCORDER Mode: Rotate the Lens Body Block 180° counterclockwise while pressing the Rotation Release Button (Left View). * Follow the (_) mark printed on the LENS body block when rotating it.
I ENGLISH Preparation ÷ Use the Power Switch to select the working modes of the device. • REC mode: Record onto a tape or store images on the Memory Stick. • OFF: Turn the device off. To recharge the battery,connect the power cable while the Power Switch is set to OFF. • TAPE PLAY (PLAYER) mode: Play and edit the recorded tape. • MEMORY PLAY (M.PLAY) mode: View and edit images and motion clips stored on the Memory Stick.
I ENGLISH Preparation _, Your camcorder is equipped with a 2 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording and play back directly, _, Depending on the conditions under which you are using the camcorder (indoors or outdoors), you can adjust ; • BRIGHTADJUST • COLOR ADJUST 1. Set the POWER switch to REC mode. • In PLAYER mode, you can only setup the LCD while the tape is playing. 2. Open the LCD screen. The LCD switches on. 3. Press the MENU button. 4.
I ENGLISH Preparation 8. Press the MENU DIAL. • Use the MENU DIAL to adjust the value of BRIGHT ADJUST and COLOR ADJUST. • You can set the values for BRIGHTADJUST between 0 ~ 35 and COLOR ADJUST between 0 ~ 35, 9. Press the MENU button to complete the setting. ÷ The VIEWFINDER will not work when the LCD is open. Use the focus adjustment knob on the VIEWFINDER to focus the picture.
I ENGLISH Preparation 4, You can adjust the LCD during playback. 4, The adjustment method is the same as is used while in CAMERA mode. (See page 32) The Speaker only works in PLAYER mode. • When you use the LCD screen for playback, you can hear the recorded sound from the built-in Speaker. - Follow the instructions below to decrease or mute speaker volume in PLAYER mode. - Take the following steps to lower the volume or mute the sound while playing a tape on the camcorder. 1.
I ENGLISH ] Functions ÷ Use the MENU button to change or select recording settings and Hardware functions. ÷ MENU instructions are displayed both on the LCD and the viewfinder. It is easier to manipulate your device using the LCD. CLOCK SET Setting the Time 41 WL.REMOTE Using the Remote Control 42 REC.LAMp Record indicator BEEP SOUND Play Vadous Sound Effects SHUT.
I ENGLISH Functions CAMCORDER PHOTO SEARCH Searching Pictures recorded in TAPE 73 PHOTO COPY Copying Picturesfrom TAPEonto the Memory Stick I09 AUDIO SELECT Seiecffeg the Audio playback channel 72 CONT SHOT Continuous Shot 95 WH£ BALANCE Seiecffeg White Balance in CAMERA Mode 98 D. ZOOM Seiecffeg Digitsi Zoom in CAMERA Mode 93 DSE SELECT Setting special effects in CAMERA mode 99 PLAY SET CAMERA M.
I ENGLISH Functions CLOCK SET WL.REMOTE J REC.LAMP J BEEPSOUND J SHUT SOUND J INITIAL DEMO REC SELECT REC MODE EIS D. ZOOM CAMCORDER RECORD SET PROGRAM AE WHT.
[ ENGLISH Functions CAMCORDER PLAY SET PHOTO SEARCH v' PHOTO COPY v' AUDIO SELECT v' CONT SHOT v' WH£ BALANCE v' D. ZOOM J DSE SELECT J CAMERA v" M.
I ENGLISH ] Functions • Seffing_ 1. Press the MENU button. REC, TAPE PLAY, MEMQ 2. The MENU OSD is displayed. The cursor ( _ currently adjusting, ) indicates the feature you are 3. Use the MENU DIAL to move between itemsand pressthe MENU DIAL to select and activate an item. 4. You can exit Menu mode by pressingthe MENU button.
I ENGLISH Functions Digital Digital functions Operating Mode Requested EIS EIS A special SLOW D.ZOOM PHOTO SHUTTER effects (TAPE) o o O A D.ZOOM o o PHOTO SLOWSHUTTER x A o A o DigitalSpecialEffects o o o o NITEPtX o A o o * A x NITE PIX o O o O x O o x × 0 X A * :The requested mode will work in this operating mode. : You can not change the requested mode. : The operating mode will be released and the requested mode will work.
I ENGLISH 1 Functions 4, CLOCK setup works in CAMCORDER or CAMERA modes. 4, The DATE/TIME is automatically recorded onto the tape and Memory Stick. Before recording or taking photos, please set the DATE/TIME. 1. Press the MENU button. • The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the MENU DIAL. 3. Use the MENU DIAL to select CLOCK SET from the sub-menu. 4. Press the MENU DIAL to enter SETTING mode. • A blinking item indicates the item can be changed.
ENGLISH_ Functions 4. The WLREMOTE function works in CAMCORDER or CAMERA modes. 4. The WLREMOTE option allows you to enable or disable the remote control for use in CAMCORDER and CAMERA modes. 1. Press the MENU button. • The menu list will appear. 2. Turn the MENU DIAL to highlight INITIAL and press the MENU DIAL. 3. Use the MENU DIAL to select WL.REMOTE from the sub-menu. 4. Press the MENU DIAL to enable or disable the remote control. The setting switches between ON/OFF each time you press the MENU DIAL.
I ENGLISH Functions •I, Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. •_ The DEMONSTRATIONfunction may only be used in the CAMCORDER mode without a tape inserted in the camcorder. •I, The demonstration operates repeatedly until the DEMONSTRATIONmode is switched OFF. 1. Set the device to CAMCORDER and set the powerswitch to REC mode. 2. Press the MENU button. • The menu list will appear. 3.
ENGLISH_ Functions J DAT_iME •Z, The DATE/TIME function works in CAMCORDER or CAMERA mode and PLAY modes. •Z, The date and time are automatically recorded on a special data area of the tape. 1. Press the MENU button. • The menu list will appear. 2. Turn the MENU DIAL to highlight VIEWER and pressthe MENU DIAL. 3. Tum the MENU DIAL to highlight DATE/TIME. 4. Press the MENU DIAL to select the sub-menu. 5. Using the MENU DIAL, select DATE/TIME mode.
I ENGLISH Functions •_ The TV DISPLAY function works in CAMCORDER or CAMERA modes. •I. You can select the output path of the OSD (On Screen Display). • OFF: The OSD appears on the LCD screen only. • ON: The OSD appears on the LCD screen. EVF and TV. • Use the DISPLAY button located on the left side of the camcorder to turn ON/OFF all of the OSD displayed on the LCD/EVF/TV, 1, Set the Power switch to REC or PLAY modes. 2, Press the MENU button. • The menu list will appear.
I ENGLISH Functions _, The EASY mode a(Iowsa beginner to easily make good recordings. • The EASY mode only operates in CAMCORDER and CAMERA modes. 1. Set the Power Switch to REC mode. 2. By pressing the EASY button, all functions on the camera will be set to OFF and the recording settings will be set to the following basic modes: • Battery level, recording mode, counter, DATE/TIME, and EIS (61_) will be displayed. • The word "EASY.Q"will appear on the LCD at the same time.
I ENGLISH 1 Functions ÷ The MF/AF function works in CAMCORDER and CAMERA modes. ÷ In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. ÷ Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable. •I, In CAMCORDER Mode, turning on the device will set it to automatic focus. In CAMERA Mode, pressing the Photo Button halfway down will set the focus.
[ ENGLISH Functions The Zoom works in CAMCORDER and CAMERA modes, Zooming is a recording technique that lets you change the size of the subject in a scene. For more professional looking recordings, do not use the zoom function tee often. You can zoom using variable zoom speeds. Usethese features for different shots. Please note that over-use of the zoom feature can lead to unprofessional looking results and a reduction of battery usage time. 1.
I ENGLISH Usin l the CAMCORDER ] - Basic Recordin l •I, When inserting a tape or closing the cassette holder, do not apply excessive force. This may cause a malfunction. •I, Do not use any tapes other than Mini DV cassettes. 1. Connect a power source. Slide the TAPE OPEN/EJECT the cassette door. switch and open - The cassette holding mechanism rises automatically. 2. Insert a tape into the cassette holder with the tape window facing outward and the protection tab toward the top. 3.
[ ENGLISH ] Usin l the CAMCORDER - Basic Recordin l _' You can select either a tape or the Memory Stick as the storage media for motion clips. _, Use MPlay mode to view the motion clips stored on the Memory Stick. 1. Set the device to CAMCORDER and set the power switch to REC mode. 2. Press the MENU button. • The menu list will appea£ DIN]T_AL _ _6_ _ RECORDSET m CAMERA O£LA¥ _,CAMCORDER SET 3. Turn the MENU DIAL highlight to CAMCORDER and pressthe MENU DIAL. • The sub-menu list will appear. 4.
I ENGLISH Usin l the CAMCORDER - Basic Recordin l 1. Connect a Power source to the camcorder. (See page 26) (A battery pack or the AC power adapter) • Insert a cassette. (See page 49) 2. Set the device to CAMCORDER and set the power switch to REC mode. • Open the LCD monitor. • If the protectiontab of the cassette is open, the words STOP and PROTECTION! will be displayed. • Make sure the image you want to record appears on the LCD monitor or viewfinder.
[ ENGLISH ] Usin l the CAMCORDER - Basic Recordin l ÷ You can view a recording using the REC SEARCH +, - function in STBY mode. REC SEARCH - enables you to play the recording backwards and REC SEARCH + enables you to play it forwards, for as long as you keep each button presseddown. ÷ If you pressthe REC SEARCH - button in STBY mode, your camcorder will play in reverse for 3 seconds and return to the original positionautomatically.
I ENGLISH Usin l the CAMCORDER - Basic Recordin l ÷ When recording, it is very importantto hold the camcorder correctly. ÷ Fix the LENS cap firmly by clipping it to the hand strap. (refer to the diagram) 1. Hold the camcorder firmly using the hand strap. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD to support and adjust it. Do not touch the built-in microphone. 4. Choose a comfortable, stable positionfor the shots that you are taking.
I ENGLISH Usin l the CAMCORDER - Basic Recordin l _, Youcan monitor the playback picture on the LCD monitor. _, Make sure that the battery pack is in place. 1. Set the device to CAMCORDER and the Power Switch to PLAY mode. 2. Insert the tape you wish to view. (See page 49) 3. Open the LCD screen. Adjust the angle of the LCD screen and set the brightness or color if necessary. 4. Press the _ (REW) button to rewind the tape to the starting point. • To stop rewinding, press the ==(STOP) button.
I ENGLISH Using the CAMCORDER - Advanced Recording •_ The PROGRAMAE function works in CAMCORDER mode only. •_ PROGRAMAE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. •X, It gives you creative control over the depth of field. • AUTO Mode - • Auto balance between the subject and the background. To be used in normal conditions. The shutter speed automatically varies from f/60 to f/250 per second, depending on the scene.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l 1. Press the MENU button. • The menu list will appear. mPLAY SET 2. Tum the MENU DIAL to highlight CAMCORDER and press the MENU DIAL. 3. Select PROGRAM AE from the sub-menu. 4. Press the MENU DIAL to enter the sub-menu. pI,CAMCORDER SET [_RECORD £ET 5. Using the MENU DIAL, select one of the PROGRAM AE modes. • Pressthe MENU DIAL to confirm the Program AE mode you have selected. SET iic"AUTO ................. OREC o EIS_II_ _D _WHT 6.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l •X, The WHITE BALANCE function in CAMCORDER mode is a recerding function that preserves the unique color of the object under any recording condition. •X, You may select the appropriate WHITE BALANCE mode to obtain high quality color in the image. • AUTO (Sg) : This mode is generally used to control the WHITE BALANCE automatically. • HOLD (4,) : This fixes the current WHITE BALANCE value.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l Zooming more than 10x is achieved digitally. The picture quality may deteriorate depending on how much you zoom in on the subject, We recommendthat you use the EIS feature with DIGITAL ZOOM for picture stability. (See page 59) 1. Set the power switch to CAMCODER or CAMERA mode. 2. Press the MENU button. • The menu list will appear. _CAMCORD£R SET _ _ECOR_SET _PLAY SET 3. Turn the MENU DIAL to CAMCORDER and press the MENU DIAL. 4.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l •I- The EIS function worksin CAMCORDER mode only. •I, EIS (Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits). •I, It provides more stable pictures when: • Recording with the zoom • Recording a small objectclose-up • Recording and walking at the same time • Recording through the window of a vehicle 1.
[ ENGLISH ] Usin l the CAMCORDER - Advanced Recordin l The DSE function works in CAMCORDER mode only. The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 9 DSE modes. a. ART Mode This mode gives the imagesa coarse effect. b. MOSAIC Mode This mode gives the imagesa mosaic effect. c.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l 1, Set the device to CAMCORDER and set the power switch to RED mode. 2, Press the MENU button. • The menu list will appear. 3, Turn the MENU DiAL to highlight CAMCORDER and press the MENU DIAL, 4, Select RECORD SET from the sub-menu and press the MENU DIAL. 5, Select DSE SELECT from the sub-menu. 6, Press the MENU DIAL to enter the sub-menu. 7, Using MENU DIAL.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l 4" The REC MODE function works in both CAMCORDER and PLAY(DV IN) modes. 4" This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. • SP (standard play): This mode permits 60 minutes of recording time with a DVM6Otape. • LP (long play): This mode permits 90 minutes of recording time with a DVM6Otape. 1. Set the device to CAMCORDER and set the powerswitch to REC mode. 2. Press the MENU button.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l 4* The AUDIO MODE function works in CAMCORDER mode. 4* This camcorder records sound in two ways. (12bit, 16bit) • 12bit : You can record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the MAIN (SOUND1) track. Additional stereo sound can be dubbed onto the SUB (SOUND2) track. • 16bit : You can record one high quality stereo sound using the 16bit recording mode. Audio dubbing is not possible when using this mode.
[ ENGLISH ] Usin l the CAMCORDER - Advanced Recordin l The WIND CUT function works in CAMCORDER, and PLAY modes. The WIND CUT function minimizes wind noise or other noise while recording. - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1. Set the device to CAMCORDER and set the power switch to REC mode. 2. Press the MENU button. • The menu list will appear. 3. Turn the MENU DIAL to highlight CAMCORDER and press the MENU DIAL. 4.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l ÷ Quick Menu is available only in CAMCORDER mode. ÷ Quick Menu is used to adjust camera functions by simply using the MENU SELECTOR dial. This feature is useful for when you want to make simple adjustments without having to access the menus and sub-menus. • DATE/TIME - Each timeyou select DATE/TIME and press the MENU DIAL, it will be displayed in the order of DATE- TIME DATE/TIME - OFF(See page 50). • WL.REMOTE(((d_l) - Each timeyouselect WL.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l • WriT. BALANCE (See page 57) - Eachtime you select WH£ BALANCE and press the MENU DIAL, you can choose between the preset WHT.BALANCE value and AUTO. As in PROGRAM AE, you can't choose between AUTO and- WHT.BALANCE value if it has not been preset.. • FOCUS (Manual Focus/Auto Focus) (See page 47) - Eachtime you select FOCUS and pressthe MENU DIAL, the FOCUS is switched to either Manual Focus (MF) or Auto Focus.
I ENGLISH Usin l the CAMCORDER - Advanced Recordin l 4* You can set SHUTTER SPEED and EXPOSURE only in CAMCORDER mode. 4* SHUTTER SPEED and EXPOSURE values can only be set in the Quick Menu. 4* SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated. 1. Set the device to CAMCORDER and set the power switch to REC mode. 2. Turn the MENU DIAL until you see icon(rJ::l) on, and then press the MENU DIAL. • You see a screen on which you can select SHUTTER SPEED and EXPOSURE.
[ ENGLISH ] Usin_l the CAMCORDER - Advanced Recordin_l _, The SLOW SHUTTER function works in CAMCORDER mode only. _, The shutter speed can be controlled, allowing you to record slow moving objects. 1. Set the device to CAMCORDER and set the power switch to REC mode. 2. Press the SLOW SHUTTER button. 3. Each time you press the SLOW SHUTTER button, SHUTTER SPEED is changed between sl/30, sl/15, sl/8, and OFE 4. To exit, press the SLOW SHUTTER button.
I ENGLISH Using the CAMCORDER - Advanced Recording ÷ BLC works in CAMCORDER mode only. ÷ Back lighting exists when the subject is darker than the background. For example: • The subject is in front of a window. • The person to be recorded is wearing whiteor shiny clothes and is placed against a bright background; the person's face is too dark to distinguish his/her features. • The subject is outdoors and the background is overcast. • The light sources are too bdght.
[ ENGLISH ] Using the CAMCORDER - Advanced Recording 4, The FADEfunction_s inCAMCORDERandCAMERAmodes. 4, Youcan give your recordings a professional look by using special effects such as fading in at the beginning of a sequence or fading out at the end of a sequence. 1. Before recording, hold down the FADE button. The picture and sound gradually disappear (Fade Out). 2. Press the START/STOPbutton and at the same time release the FADE button.
I ENGLISH Using the CAMCORDER ÷ ÷ ÷ ÷ - Advanced Recording The AUDIO DUBBING function only works in PLAYER Mode. You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound. Use the internal and external microphones or other audio equipment. The original sound will not be erased. 1. Set the device to CAMCORDER. • If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder. 2.
ENGLISH Using the CAMCORDER - Advanced Recording 1. Insert the dubbed tape and press the MENU button. 2. Turn the MENU DIAL to highlight CAMCORDER. 3. Press the MENU DIAL to enter the sub-menu. _NFIAL D_;#_F_o CAMERA 4. Select PLAY SET and press the MENU DIAL. bCAMCORDER SET RECORDSET _ PLAY SET MEMORY D WEW£R [] 5. Use the MENU DIAL to select AUDIO SELECT from the sub-menu. 6. Press the MENU DIAL to enter the sub-menu. 7. Using the MENU DIAL, select the AUDIO playbackchannel.
I ENGLISH Using the CAMCORDER 1 - Advanced Recording I. Press the PHOTO button half way down and hold it. • The still picture appears on the LCD monitor. • If you do not wish to record, release the button. 2. Release the PHOTO button and press the PHOTO button again. • The still picture is recorded for about 6~7 seconds. 3. After the PHOTO has been recorded, the camcorder returns to STBY mode. • TOtake a quick photo, press the PHOTO button all the way down.
I ENGLISH Using the CAMCORDER - Advanced Recording €. The NITE PIX function works in CAMCORDER mode only. €. The NITE PIX function enables you to record a subject in darkness. 1. Set the device to CAMCORDER and set the Power Switch to REC mode. 2. Slide the NITE PIX switch to ON. • I;i$1(NITE PIX indicator) appears on the LCD monitor. • The infrared(invisible rays) lightis turned on automatically. 3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.
I ENGLISH Using the CAMCORDER 1 - Advanced Recording ÷ The NITE PIX function works in CAMCORDER mode only. ÷ The POWER NITE PIX function can record a subject more brightly in darkness than the NITE PIX function. ÷ POWER NITE PIX is displayed for three seconds on the LCD if you press the SLOW SHUTTER button when the NITE PIX switch is turned on. ÷ When you work in POWER NITE PIX mode, the POWER NITE PIX icon appears on the LCD continuously. 1.
ENGLISH ] Using the CAMCORDER - Advanced Recording _, In some situations different recording techniques may be required for more dramatic results. Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. Recording while viewing the LCD screen from above. Recording while viewing the LCD screen from below. Recording while viewing the LCD screen from the front.
I ENGLISH Playback ÷ The playback function works in PLAY mode only. •_ It is practicalto view a tape using the LCD when in a car or outdoors. •_ To play back a tape, the television must have a compatible color system. •I. We recommend that you use the AC Power Adapter as the powersource for the camcorder. Auto _np_t 1. Connect the camcorder to the TV with the AudioNideo cable.
ENGLISH Playback •Z, You can connect your camcorder to a TV through a VCR, 1. Connect the camcorder to the VCR with the AudioNideo cable. • The Yellow plug : Video • The White plug : Audio(L) • The Red plug : Audio(R) - STEREO only 2. Connect the TV to the VCR. 3. Set the device to CAMCORDER. 4. Set the power switch to PLAY mode, 5. Turn on both theTV and VCR, • Set the input selector on the VCR to LINE, • Select the channel reserved for your VCR on the TV set. 6.
I ENGLISH 1 Playback 4. The PLAY/STILL, STOP, FF, REW buttons are located on the camcorder and the Remote Control, 4. The EADV(Frame advance), SLOW buttons are located on the Remote Control only, 4. To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more than 5 minutes, 4. Press the )'/11(PLAY/STILL) button during Playback, 4. To resume playback, press the )/11 (PLAY/STILL)button again, 4.
I ENGLISH Playback _, The MEMORY function works in both REC and TAPE PLAY modes. _, You can mark a point on a tape that you want to return to following playback. 1. Press the ZERO MEMORY button on the remote control during playback or while recording at the point you wish to return to. • The time code is changed to a tape counter that is set to Zero Memory with the [] g:o0:00(Zero Memory Indicator) • If you want to cancel the Zero Memory function, press the ZERO MEMORY button again. 2.
I ENGLISH IEEE 1394 Data Transfer 4. Connecting with Other DV Standard Products. • A standard DV connection is quite simple. If a product has a DV port(firewire), you can transfer data by connecting to the DV port using the correct cable. !!! Please be careful since there are two types of DV ports, (4pin & 6pin). This camcorder has a 4pin terminal. 4. With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images to be transferred. 4.
[ ENGLISH ] IEEE 1394 Data Transfer • • • • CPU : Intel®(orcompatible) Pentium IllTM 450Mhz or faster. Operating System : Windows®98SE, ME, XP, Mac OS (9.1~10.2) Main Memory : More than 64 MB RAM IEEE1394 Add-On Card or Built In IEEE1394 Card 1. Set the deviceto CAMCORDERandMe powerswitchto TAPEPLAYmode. 2. Connect the DV cable (not supplied) from the DV IN/OUT port of the camcorder to the DV IN/OUT port of the other DV device. • Make sure that DV IN appears on the screen. 3.
I ENGLISH Using the CAMERA -:-TheMemory Stick stores and manages still images recorded by the camera. •F Record Still Images View Still Images • Single(View Frame by Frame) • Slide Show •F Protect ImagesAgainstAccidental Erasure •F Delete Images Recorded on the Card •F Add text to Still Images •_ Formattingthe Card • • • • --- Terminal Protection tab You can use most of the camera's functions when recording to the Memory Stick. "_" appears on the screen while recording to the Memory Stick.
ENGLISH Using the CAMERA Turn the Power switch to OFE 2. Insert the Memory Stick into the CARD slot in the direction of the arrow. 1. Turn the Power switch to OFE 2. Push the Memory Stick, and it will automatically come outof the camcorder. 3. Pull out the Memory Stick. • • • If you set the camcorder to MEMORY PLAY mode, the last recorded still image appears. If there are no recorded images on the Memory Stick, "NO STORED PHOTO!" will appear on the screen.
I ENGLISH Using the CAMERA ÷ The still images that you recorded are saved in JPEG file format on the card. ÷ Each file has a file number and all files are assigned to a folder. • A file number from DCAMOO01to DCAM9999 is sequentially assigned to each recorded image. • Each folder is numbered from 100SSDVC to 999SSDVC and recorded on the CARD.
[ ENGLISH ] Using the CAMERA _, File numbers will be given to images in order of recordingwhen still images are stored in the Memory Stick. _, MEMORY FILE NUMBERS may be set as follows: • SERIES: When there are existing files, the new image will be named as the next number inthe sequence. • RESET - When there are no files stored in the Memory Stick: The file numbering starts from 0001 - When there are files stored in the Memory Stick: File numbering will continue after the last file's number 1.
I ENGLISH Basic Picture-Taking 1. Connect a power source to the CAMERA (See page 26) (A battery pack or an AC power adapter) 2. Set the device to CAMERA mode and the powerswitch to the REC mode. • Open the LCD monitor. • Ensure that the Memory Stick has been properly inserted into the device. • Make sure the image you want to record appears on the LCD monitor or viewfinder. • Make sure the battery level indicates that there is enough remaining power for your expected recording time. 3.
[ ENGLISH ] Basic Picture-Taking _, You can playback and view still images recorded on the Memory Stick. _, Still Images stored on the Memory Stick are displayed in the same size despite their resolution on the LCD or viewfinder. _, There are 2 ways to view recorded images. • Single : To view an image frame by frame. • Slide Show : Toview all images automatically and in consecutive order. 1. Set the device to CAMERA. 2. Set the powerswitch to MEMORY PLAY mode. • The last recorded image appears.
I ENGLISH Basic Picture-Taking 1. Set the device to CAMERA 2. Set the powerswitch to MEMORY PLAY mode. • The last recorded image appears. - If there are no recorded images on the Memory Stick, "NO STORED PHOTO!" will appear on the screen. 3. Press the WII (S.SHOW) button. • All images will be playedback consecutively for 4-5 seconds each. 4. To stop the slide show, press the I_/11(S.SHOW) button again.
[ ENGLISH ] Basic Picture-Taking _, Quick Review is used to view the last recorded image. 1. Record a picture using Photo Button. 2. Press the REV(_I ) Button to view the picture taken. 3. To return to CAMERA mode, press the REV('_I ) Button again or press the Photo Button halfway down.
I ENGLISH 1 Basic Picture-Taking ÷ In CAMERA Mode, the automatic focus will not engage unless the Photo Button is pressed. ÷ To get a good image, please verify the focus is set properly before pressing the Photo Button firmly. ÷ While the camera is focusing (by pressing the Photo Button halfway down), a flashing icon(_ ) will appear on the OSD (On Screen Display). A beep will be heard once the focus is set. 'mD m 1. Adjust your frame so that the subject is within the AF frame on the LCD screen. 2.
I ENGLISH Advanced Techniques €. Focuswill be set to the AF frame of LCD screen. Ifthe subject leaves the AF frame, the acquired image may blur. €. When objects are spread throughout the frame, use FOCUS LOCK to get even focusing. 1. First, adjust your frame so that the subject is within the AF frame on the LCD screen. 2. Press the Photo Button halfway down to set the focus on the subject. 3. Adjust your framing with the Photo Button pressed halfway down to get the desired frame. 4.
I ENGLISH Advanced Techniques ÷ A 6X Digital Zoom is provided. ÷ The Digital Zoom, which differs from the Optical Zoom, may cause deterioration of image quality, Please use with caution, 1, Set the device to CAMERA and set the power switch to REC mode. [3 _NIT_AL 2. Press the MENU button. • The menu list will appear. 3. Turn the MENU DIAL to highlight CAMERA and press the MENU DIAL. 4. Turn the MENU DIAL to activate the D. ZOOM and press the MENU DIAL. • The D. ZOOM menu is changed to 6X.
I ENGLISH Advanced Techniques 4" The MACRO function works in CAMERA mode only. 4, Use MACRO Mode for recording imagesat close range (under 31.5 inches). 4, Effective focal distance in MACRO Mode is 11.8 inches~ 31.5 inches. • • • • • Pressing the MACRO Button again or turning it off willexit from MACRO Mode. Please be careful not to cause a shadow when recording in MACRO Mode. As the distance to the subject decreases, focusing area will be narrowed.
I ENGLISH Advanced Techniques ÷ The CONT. SHOT function works in CAMERA mode only. ÷ Continuous recording will occur while the Photo Button is being pressed. • OFF: Records one picture at a time • Records pictures continuously up to storage capacity. - When the image resolution is set to 1600 x f 200 or higher, only 3 continuous CONTINUOUS SHOT. pictures can be recorded when using 1, Set the device to CAMERA and set the powerswitch to REC mode. 2, Press the MENU button. • The menu list will appear.
I ENGLISH Advanced Techniques 4' The FLASH works in CAMERA mode only. 4' When power is supplied, FLASH mode is set toAuto. When you change FLASH modes, an icon that shows the current FLASH mode will be displayed on the LCD screen. 4' Using a flash enables the user to take bright pictures in dark circumstances, such as nighttime shooting and in shaded areas.
I ENGLISH Advanced Techniques ÷ The FLASH SELECT function works in CAMERA mode only, • Auto : The Flash automatically strobes when the surroundings are dark enough. • RED-EYE REDUCTION : Using the flash to take pictures in dark surroundings may cause red-eye to occur. Using the REDEYE REDUCTION setting, the flash pre-strobes before recording the picture to reduce the occurrence of red-eye. SLOW SYNC : When the Shutter Speed is set to SLOW, the flash strobes at the adjusted shutter speed.
I ENGLISH Advanced Techniques *_ When the recorded co]or of a subject appears differently because of certain weather or lighting conditions, adjusting the White Balance enables you to get the correct color of the subject. *_ The Adjusted White Balance is stored when the device is turned off. If the battery is fully discharged or detached, the White Balance will return to the AUTO setting, which is the factory default. • AUTO : This mode is generally used to control the WHITE BALANCE automatically.
I ENGLISH Advanced ] Techniques ÷ The DSE function works in CAMERA mode only, ÷ The Digital Effects function will apply special effects to the image while recording. ÷ There are 3 DSE (Digital Special Effects) in CAMERA Mode, Youcan check the DSE applied image on the LCD screen or the viewfinder. a, BLK & WHT Mode This mode changes the imagesto black and white. b, SEPIA Mode This mode gives the imagesa reddish-brown pigment.
I ENGLISH Advanced Techniques 1. Set the device to CAMERA and set the power switch to REC mode. 2. Press the MENU button. • The menu list will appear. 3. Turn the MENU DIAL to highlight CAMERA and press the MENU DIAL. 4. Turn the MENU DIAL to activate DSE SELECT and press the MENU DIAL. 5. Using the MENU DIAL, select the DSE you wish to use. • Pressthe MENU DIAL to confirm the DSE you have selected. 6. To exit, press the MENU button. • The DSE function will not operate in EASY mode.
I ENGLISH Advanced 1 Techniques ÷ SPOT AE mode works in CAMERA mode only. ÷ Use this function to adjust the exposure of the subject to obtain better results when there is strong backlight or high contrast between the subject and background, for example on seashores or ski slopes. 1. Set the device to CAMERA and the power switch to REC mode. 2. Press the SPOT AE(STOP) button. • The Icon([_3) is displayed on the LCD screen. 3.
[ ENGLISH ] Advanced Techniques _, The NIGHT SCENE function works in CAMERA mode only. _, The NIGHT SCENE function enables you to record a subject in darkness. 1. Set the device to CAMERA and set the Power Switch to REC mode 2. Press the NIGHT SCENE button. • The ([_) appears on the LCD monitor. • The infrared(invisible rays) light is automatically turned on. 3. To cancel the NIGHT SCENE function press the NIGHT SCENE button again.
IENGLISH] Advanced Techniques You can select the quality of a still image to be recorded. 1. Set the device to CAMERA. 2. Set the Power Switch to REC mode. 3. Press the MENU button. • The menu list will appear. 4. Turn the MENU DIAL to highlight MEMORY. 5. Press the MENU DIAL to enter the sub-menu. 6. Turn the MENU DIAL to highlight PHOTO SET in the sub-menu. 7. Press the MENU DIAL. 8. Turn the MENU DIAL to highlight QUALITY and press the MENU DIAL. 9.
ENGLISH] Advanced Techniques _, Youcan select the size of a still image to be recorded. _, The number of imagesthat can be stored in the Memory Stick will be decreased as the resolution of images increases. _, The resolution may be set before recording an image and between recordings.
I ENGLISH Advanced Techniques 8. Turn the MENU DIAL to highlight SIZE and press the MENU DIAL. 9. Using the MENU DIAL, select the image size. • Press the MENU DIAL to confirm the image size. 10. To exit, press the MENU button. • • • • 8MB 16MB 32MB 64MB 128MB L2272 X 1704 7 15 32 65 132 P2272 X 1504 M1600 X 1200 8 14 17 29 38 77 150 $640 X 480 55 114 60 234 123 472 247 949 Estimation is based on image quality being set to FINE mode.
I ENGLISH Advanced Techniques _, This feature enables you to record onto the MEMORY STICK. 1. Check whether the MEMORY STICK has been inserted into the device. If it is not in the device, insert it into the slot. C3J_ITU'kL D_A_OF_EtERO CAMERA m MEMORY [3 V_EWER RECORD S£T c PLAY SET B 2. Set the device to CAMCORDER and set the power switch to REC mode. 3. Press the MENU button, • The menu list will appear, 4. Turn the MENU DIAL to highlight CAMCORDER and press the MENU DIAL. 5.
I ENGLISH Advanced Techniques 4, The MPEG PB function works only in MEMORY PLAY mode. 1. Check whether the MEMORY STICK has been inserted intothe device. If it is not in the device, insert it into the slot. 2. Set the device to CAMCORDER and set the Power Switch to MEMORY PLAY mode. 3. Press the MENU button. • The menu list will appear. 4. Turn the MENU DiAL to highlight MEMORY and press the MENU DIAL. 5. Select MPLAY SELECT and pressthe MENU DIAL.
I ENGLISH Advanced Techniques 4, The resolution of the MPEG clip may be set to 320 x 240 or 160 x 120. 1. Check whether the MEMORY STICK has been inserted into the device. If it is not in the device, insert it into the slot. 2. Set the device to CAMCORDER and set the Power Switch to REC mode. 3. Press the MENU button • The Menu list will appear. 4. Turn the MENU DIAL to highlight CAMCORDER and pressthe MENU DIAL. 5. Press the MENU DIAL again. 6.
I ENGLISH Advanced Techniques 4, Youcan copy still images recorded with the PHOTO function from a cassette to a Memory Stick, 1, Set the device to CAMCORDER and set the Power Switch to TAPE PLAY mode, 2, Press the MENU button, • The menu list will appear. 3, Turn the MENU DIAL to highlight PLAY SET and press the MENU DIAL.
I ENGLISH Advanced Techniques _, This camcorder supports the DPOF (Digital Print Order Format)print format. _' Youcan automatically print images recorded on a Memory Stick with a printer supporting DPOE _, There are 2 ways to make a PRINT MARK. • THIS FILE : You can set a print mark on the photo image displayed on the LCD. • ALL FILES : To print 1 copy each of all of the stored images. 1. Set the device to CAMCORDER and set the Power Switch to MEMORY PLAY mode. 2.
I ENGLISH Advanced 1 Techniques ÷ You can protect importantimages from accidental erasure. • If you execute FORMAT,all images including protected images will be erased. 1. Set the device to CAMCORDER and set the Power Switch to MEMORY PLAY mode. 2. Using the _€'(FWD) and 44 (REV) buttons, search for the still image that you want to mark. 3. Press the MENU button. • The menu list will appear. 4. Turn the MENU DIAL to highlight MEMORY and press the MENU DIAL. • The MEMORY SET sub-menu will appear. 5.
[ ENGLISH ] Advanced Techniques _' You can erase the still images recorded on the Memory Stick. _, If you want to delete protected images, you must first deactivate the image protection. _, An image which has been deleted cannot be recovered. 1. Set the device to CAMCORDER. 2. Set the Power Switch to the MEMORY PLAY mode. 3. Using the I_' (FWD) and _1 (REV) buttons, search for the still image that you want to delete. 4. Press the MENU button. 5.
I ENGLISH Advanced ] Techniques 8. A box will appear to verify whether you wish to delete the image(s). • Using the MENU DIAL, select the item. • EXECUTE : Deletes the selected image(s). • CANCEL : Does not delete the selected image(s) and returns to the previous menu. 9. Select EXECUTE or CANCEL and pressthe MENU DIAL. • If you try to delete a protected image, "PROTECT!" appears on the screen.
ENGLISH_ Advanced Techniques 4. You can use the MEMORY FORMAT functions to completely delete all images and options on the Memory Stick, including protected images. 4. The format function restores the Memory Stick to its initial state. 4. The Memory Stick supplied with this camcorder has already been formatted, 4. If you execute the MEMORY FORMAT function, all images will be erased completely and cannot be recovered.
I ENGLISH Advanced 1 Techniques ÷ You can record a still imagefrom a cassette onto a Memory Stick. ÷ If you want to recorded multiple still imagesfrom a cassette to a Memory Stick, use the COPY function. 1. Set the device to CAMCORDER and the Power Switch to REC mode. 2. Press the MENU DIAL. 3. Turn the MENU DIAL to highlight CAMCORDER and press the MENU DIAL. 4. Select RECORD SET and press the MENU DIAL. 5. Turn the MENU DIAL to highlight REC SELECT and press the MENU DIAL. • Set REC SELECT to MEMORY.
ENGLISH USB Interface 4, You can easily transfer a still image from a MEMORY STICK to a PC without additional add-on cards via a USB connection. 4, You can transfer an image to a PC via a USB connection. 4, If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the camcorder.
I ENGLISH USB Interface •',, Do not connect the camcorder to PC before installingthe program. •',, If another camera or scanner is connected, please disconnect it in advance. •',, This explanation is based on Windows_98SE OS. 1. Insert the software CD into CD-ROM drive. 1. - installation selection screen appears in the monitor. 2. If the installation selection screen does not appear after inserting the CD click "Run" on the Windows "Start" menu and execute SETUP.EXE file to begin installation.
ENGLISH ] USB Interface 1. Connect a USB cable to the USB port on the PC, 2. Connect the other end of the USB cable into the properterminal on the camcorder. (USB jack) ÷ After completing the data transmission, you must disconnect the cable in the following way: 1. Select the removable disc icon and click the right mouse button to select [Eject]. 2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen appears.
I ENGLISH ] Maintenance ÷ At the end of a recording you should remove the power source. ÷ When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Therefore, it should be removed from the camcorder. 1. Slide the TAPE OPEN/EJECT switch in the direction of the arrow. • Opening the cassette door ejects the tape automatically. • Please wait for the tape to be completely ejected. 2.
I ENGLISH Maintenance To ensure normal recording and clear pictures, clean the video heads when the playback pictures display square block-shaped noise or distortion or a blue screen appears. 1. 2. 3. 4. Set the device to CAMCORDER. Insert the Cleaning Tape. Press the I_/II(PLAY/STILL) button. Press the • (STOP) button after 10 seconds. • Check the quality ofthe pictureusing a videocassette. If the picture quality has not improved, repeat the operation.
I ENGLISH ] Maintenance ÷ Each country or region has its own electric and color systems. ÷ Before using your camcorder abroad, check the following items. • • You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V, 50/60 Hz. Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet. • You can view your recording in the viewfinder.
I ENGLISH Troubleshooting _, Before contacting a Samsung authodzed service center, perform the following simple checks. They may save you the time and expense of an unnecessary call.
I ENGLISH Troubleshooting MEMORY STICK! stow There no Memory stick in the camcorder Insert a Memory Stick MEMORY FULL! s_ow There is riot enough memory to record¸ Change to a new Memory Stick¸ Erase recorded image¸ There are no images receded on the Memory Stick Record new images¸ NO STORED PHOTO! stow WRITE PROTECT! s_ow The Memory Stick is record ,rotected Release the write protect tab on the Memory Stick¸ PROTECT! stow When you try to delete to protected image¸ Cancel the protect of
[ ENGLISH ] Troubleshooting •l- if these instructions do not solve your problem, contact your nearest Samsung authorized You cannot on. swgch the camcorder Check the battery pack or the AC Power Adapter. START/STOP button does not operate while recording. Check the POWER switch is set to CAMERA. You have reached the end of the cassette. Check the record protection tab on the cassette. The camcorder goes off automatically.
I ENGLISH Specifications Video signal Video recording system Audio recording system Usablecassette Tapespeed Taperecordingtime FF/REWtime Imagedevice Lens Fifierdiameter NTSC 2 rotary heads,Helical scanningsystem Rotary heads,PCM system Digitalvideo tape (6.35mmwidth): Mini DVcassette SP: approx.1g.glmm/s LP: approx.12.56mm/s SP: 60 minutes(when usingDVM 60), LP: 90 minutes(when usingDVM 60) Approx. 180 sec. (usingDVM60tape) CCD (ChargeCoupled Device),413M CCD (DIGITALCAMERA) F1.
ENGLISH INDEX AAudiodubbing............................................................................................ 71 IEEE1394 .................................................................................................. 81 AUDIOMODE............................................................................................ 63 imagequality............................................................................................. 103 imagesize....................................................
I ENGLISH INDEX Quick Menu ................................................................................................. 65 Quick Review .............................................................................................. 90 REC MODE ................................................................................................ 62 RemoteControl........................................................................................... 24 Search ................................................
[ ENGLISH ] Warranty SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if productfails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it's option. All warranty repairs must be performedby a SEA authorized service center.
I ENGLISH J THIS CAMCORDER IS MANUFACTURED BY: ..... _ _iiiiiiiiiiiiiiiiiiii!iiiiiiiiiiii_iii_iiiilili_iiiiiiiiiiiiiiiiiiiiiiililill i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iiiiii_ SERVICE DIVISION 400 Valley Road, Suite 201, Mt. Arlington Tel: 1-800-SAMSUNG N.J. 07856 (1-800-726-7864) *Samsung Electronics' Internet http://www.samsungusa.
