User Manual

ENGLISH
Advanced Techniques
106106
MPEG REC
✤ This feature enables you to record onto the MEMORY STICK.
1. Check whether the MEMORY STICK has been
inserted into the device. If it is not in the device,
insert it into the slot.
2. Set the device to CAMCORDER and set the
power switch to REC mode.
3. Press the MENU button.
■
The menu list will appear.
4. Turn the MENU DIAL to highlight CAMCORDER
and press the MENU DIAL.
5. Select RECORD SET and press the MENU DIAL to
enter the sub-menu.
6. Select REC SELECT from the sub-menu and press
the MENU DIAL.
■
The REC SELECT toggles between TAPE and
MEMORY with each press of the MENU DIAL.
Select MEMORY.
7. Press the START/STOP button. The images which
are captured are recorded as a moving picture
MPEG4 type file onto the MEMORY STICK.
■
You can record a camera still image onto the
Memory Stick by pressing the Photo button
instead the START/STOP button.
8. Press the START/STOP button to stop the
recording.
Notes
■
Before using the MPEG REC function, check
whether the MEMORY STICK has been inserted into the cam-
corder.
■
Moving pictures can be made in two sizes, 160X120 or 320X240
(Pixels).
■
Noise can be generated in LCD or Monitor at the time of record.
This noise is not recorded on Memory Stick.
✤
■
■
■
■
■
■
CAMCORDER REC MODE
INITIAL
RECORD SET
PLAY SET
CAMCORDER
CAMERA
MEMORY
VIEWER
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
PLAY SET
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
REC SELECT
REC MODE
EIS
D. ZOOM
PROGRAM AE
WHT. BALANCE
TAPE
SP