User Manual

ENGLISH

6666

Advanced Recording

Audio dubbing

✤ The AUDIO DUBBING function only works in PLAYER Mode.

✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.

✤ Use the internal and external microphones or other audio equipment.

✤ The original sound will not be erased.

Dubbing Sound

1. Set the camcorder to PLAYER mode.

■

If you want to use an external microphone, connect the microphone to

the external MIC input jack on the camcorder.

■

When you wish to dub using the External A/V input, connect the AUDIO

/VIDEO cable to the camcorder by inserting the cable jack into the Multi AV

in/out terminal at the front side of the camcorder.

2. Press the (PLAY/STILL) button and find the time frame of the scene to

be dubbed.

3. Press the (PLAY/STILL) button to pause the scene.

4. Press the A.DUB button on the Remote Control.

■

A.DUB will be displayed on the LCD.

■

The camcorder is in a ready-to-dub state for dubbing.

5. Press the (PLAY/STILL) button to start dubbing.

■

Press the (STOP) button to stop the dubbing.

Notes

■

You can not use the audio dubbing function while playing a write protected video tape.

■

When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio system from

which you wish to record.

■

You can not use the audio dubbing function while the Multi AV cable is connected to TV.

■

You can not dub sound on a pre-recorded in LP mode or 16 bit mode.

FADE

S.SHOW DELETE

BLC



CRM-D3E