User Manual

2. Press numeric button 2.
Result:
The message MUTE is
displayed. The person you're talking
to can no longer hear you, but you
can hear your correspondent.
3. Press FCN and numeric button 2
again when you wish to resume the
conversation with your party.
Result:
The message MUTE
disappears on the display and you
can speak with your party.
20 21
456
123
78
0
9
GHI JKL MNO
.QZ ABC DEF
PRS
ALPH
TUV
OPR
WXY
LOCK
STO
RCL FCN
SEND
CLR
END
PWR
1. Press FCN while you are over the
phone.
MUTE
INUSE CDMASVC
456
123
78
0
9
GHI JKL MNO
.QZ ABC DEF
PRS
ALPH
TUV
OPR
WXY
LOCK
STO
RCL FCN
SEND
CLR
END
PWR
1
2
3
3
1. Press:
FCN
followed by
Numeric buttons 2 and 1.
Result:
The alert type currently
selected is displayed.
LAMP
Alert Type
INUSE CDMASVC
2. Press or until the desired mode
is displayed.
Result:
The alert types you can
choose are displayed:
BELL : the bell sounds and the
receiving lamp flickers.
VIBRATOR (option): the phone
vibrates and the receving lamp
flickers.
LAMP : the receiving lamp flickers.
VIB+BELL(option) : the phone
vibrates three times, then the bell
sounds and the receving lamp
flickers.
3. Press STO.
Result:
appears if the LAMP mode
is selected.
appears if the VIBRATOR or
VIB+BELL mode is selected.
This feature allows you to mute the phone's
microphone, so you can have a private conversation
with someone without the person at the other end
listening.
This function is only available during a telephone conversation.
Mute
You can choose a call alert type that informs you of
an incoming call. There are bell, lamp indication, or
vibration (option) modes.
Choosing Alert Type
• When you use the hands-free kit, you cannot choose the
VIBRATOR or LAMP indication modes.
• The VIBRATOR mode is not available in some countries.
456
123
78
0
9
GHI JKL MNO
.QZ ABC DEF
PRS
ALPH
TUV
OPR
WXY
LOCK
STO
RCL FCN
SEND
CLR
END
PWR
1
1
1
SEND
CLR
END
456
123
78
0
9
GHI JKL MNO
.QZ ABC DEF
PRS
ALPH
TUV
OPR
WXY
LOCK
STO
RCL FCN
SEND
CLR
END
PWR
2
3
Basic Operation Basic Operation