User Manual

ManualsBrandsSamsung ManualsMobile Phone: Mobile PhoneSCH-200F

66 67

SEND

CLR

END

456

123

GHI JKL MNO

.QZ ABC DEF

PRS

ALPH

TUV

OPR

WXY

LOCK

STO

RCL FCN

SEND

CLR

END

PWR

4. Press or to choose the status

you want.

5. Press STO.

Automatic Receiving: If this feature is activated (YES mode)

and a call is received, the phone will answer the call

automatically after 2 rings. If it is disabled (NO mode), you must

press any button except PWR to answer the call.

If you have chosen LAMP, VIBRATOR (option), or VIB+BELL

mode to alert the incoming call, the Automatic Receiving

feature will not activate.

Selectable Features

Automatic Redial: When this feature is activated (YES

mode), a number is automatically redialed if the call is not

connected successfully. If the phone is connected to the system

while redialing the number, you can hear the connect tone. If it

is disabled (NO mode), you must redial manually.

Tone Length: You can change the tone length. Your phone is

preset to Short at the factory. If the remote machine does not

access the tone generated from your phone, change the tone

length to Long.

When you call a paging system, your phone should be in

Short mode.

Backlight: When you turn on your phone, the LCD display and

keypad light up. You can choose from Automatic, Always

ON, or Always OFF. In Automatic mode, the light goes

off automatically 8 seconds after the last button is pressed. (If

you use the phone with hands-free kit, the light is on from 5

P.M. to 7:59 A.M. on the following day.) In Always ON mode,

if you use the phone with hands-free kit, this light is always on;

if not, this mode operates the same as Automatic mode. If

you choose Always OFF mode, the light is always off.

Call Time Display: If this feature is activated (ON mode), the

call time counter is automatically displayed when the phone is

connected to the system. You can check the call time during

telephone conversation. In OFF mode, you must activate the

call time display manually by pressing FCN and numeric button

1 while you are over the phone. To turn off the feature, press

FCN and 1 again.

The call charge starts to count when the call is actually

connected.

Present Time Display: If this feature is activated (ON mode),

the current time is displayed. In OFF mode, the current time is

not displayed. If you turn the phone on and off, or attach and

remove the battery in the analog mode, the current time

disappears.

Release Tone: When this feature is activated (YES mode), the

phone sounds a release tone when a call is released if the call

was made in CDMA mode. In NO mode, the phone does not

generate a release tone. See page 40.

Connect Tone: When this feature is activated (YES mode), the

phone makes a connect tone when your phone is connected to

the basestation system to make a call. In NO mode, the phone

does not generate a connect tone. See page 41.

Advanced Features