Manual

20 21
1. Press:
◆ FCN
followed by
◆ Numeric buttons 2 and 1.
Result:
The alert type currently
selected is displayed.
LAMP
Alert Type
INUSE CDMASVC
2. Press ▲ or ▼ until the desired mode
is displayed.
Result:
The alert types you can
choose are displayed:
◆ BELL : the bell sounds and the
receiving lamp flickers.
◆ VIBRATOR : the phone vibrates and
the receiving lamp flickers.
◆ LAMP : the receiving lamp flickers.
◆ VIB+BELL : the phone vibrates
three times, then the bell sounds
and the receiving lamp flickers.
3. Press STO.
Result:
◆ appears if the LAMP mode
is selected.
◆ appears if the VIBRATOR or
VIB+BELL mode is selected.
You can choose a call alert type that informs you of
an incoming call. There are bell, lamp indication, or
vibration modes.
Choosing Alert Type
Recording the Other Person’s Talking
During Telephone Conversation
󰥾 • When you use the hands-free kit, you cannot choose the
VIBRATOR, LAMP or VIB+BELL indication modes.
• The VIBRATOR and VIB+BELL mode are not available in some
countries.
Basic Operation Basic Operation
1
1
1
1
2
3
1. To record, press FCN during a
telephone conversation.
2. Press numeric button 1. The LCD
displays Recording.
3. The recording is stored in 30-second
memory, so it is recommened to
record shorter than 30 seconds. The
recording will stop automatically
after 30 seconds.
4. To listen to the recording, press FCN
in Standby mode, then press numeric
buttons 4 and 7.
2
22
4
4
4