Manual

64 65
Useful Features Useful Features
1. Press:
◆ FCN
followed by
◆ Numeric button 1
Result:
The features you can choose
are displayed.
Auto Setup
1:AutoRedial
2:Auto Recv
INUSE FM CDMASVC
2. Press ▲ or ▼ until you find the
feature you wish to change.
Result:
The phone shows a function
number you have to press to choose
the feature.
3. Press the function number of the
feature.
󰥾 The function numbers are as
follows:
1: Auto Redial
2: Auto Receiving
3: Tone Length
4: Backlight
5: Call Time Display
6: Present Time Display
7: Release Tone Setting
8: Connect Tone Setting
You can change the status of an automatic feature
already setup in your phone.
To Change the Status of Automatic Feature
Automatic Feature Setup
1
1
2
3
4. Press ▲ or ▼ to choose the status
you want.
5. Press STO.
Automatic Receiving: If this feature is activated (YES mode)
and a call is received, the phone will answer the call
automatically after 2 rings. If it is disabled (NO mode), you must
open the cover or press any button to answer the call.
󰥾If you have chosen LAMP, VIBRATOR, or VIB+BELL mode to
alert the incoming call, the Automatic Receiving feature will
not activate.
Selectable Features
Automatic Redial: When this feature is activated (YES
mode), a number is automatically redialed if the call is not
connected successfully. If the phone is connected to the system
while redialing the number, you can hear the connect tone. If it
is disabled (NO mode), you must redial manually.
Tone Length: You can change the tone length. Your phone is
preset to Short at the factory. If the remote machine does not
access the tone generated from your phone, change the tone
length to Long.
󰥾When you call a paging system, your phone should be in
Short mode.
4
5