Manual

66 67
Advanced Features Advanced Features
Backlight: When you turn on your phone, the LCD display and
keypad light up. You can choose from Automatic or
Always OFF. In Automatic mode, the light goes off
automatically 8 seconds after the last button is pressed. If you
choose Always OFF mode, the light is always off.
Call Time Display: If this feature is activated (ON mode), the
call time counter is automatically displayed when the phone is
connected to the system. You can check the call time during
telephone conversation. In OFF mode, you must activate the
call time display manually by pressing FCN and numeric button
2 while you are over the phone. To turn off the feature, press
FCN and 2 again.
󰥾The call charge starts to count when the call is actually
connected.
Present Time Display: If this feature is activated (ON mode),
the current time is displayed. In OFF mode, the current time is
not displayed.
Release Tone: When this feature is activated (YES mode), the
phone sounds a release tone when a call is released. In NO
mode, the phone does not generate a release tone. See page
46.
Connect Tone: When this feature is activated (YES mode), the
phone makes a connect tone when your phone is connected to
the basestation system to make a call. In NO mode, the phone
does not generate a connect tone. See page 47.
1. Press:
◆ FCN
followed by
◆ Numeric button 0
2. Enter the lock code.
󰥾 The lock code is preset to 0000.
An asterisk ( ) is displayed for
each digit entered.
HK HUTCHISON
Greeting?
INUSE FM CDMASVC
3. Press numeric button 1 to choose
'Greeting' function.
5. Press STO.
4. Enter new greeting message with the
number button marked with the
desired letter.
󰥾 •You can enter the greeting
message up to 12 digits.
•Refer to page 28 for entering
letter with the number button.
This feature allows you to change the greeting
message displayed when you turn on the phone.
Changing Greeting Message
1
1
2
4