Manual

8 9
LCD Display and Indicators
2
1. To attach the battery pack after
charging, align it with the phone
about 1cm (1/2") away from its place
so that the two arrows on the phone
are seen, the battery charge contacts
pointing downward.
2. Slide the battery pack upwards until
it clicks firmly into position.
Result:
Your phone is now ready to
be turned on.
3
3. To remove the battery pack, release
it by pressing the button on the rear
of the phone.
4
4. Slide the battery pack downward
about 1cm (1/2") and lift it away from
the phone.
Installing the Battery Pack
INUSE NO ROAM FM CDMASVC
INUSE
blinks while your phone selects a channel
and lights up when the line is connected.
displays the dialed
numbers and the
current status
NOSVC
SVC
NOSVC: no service area
SVC: service area
ROAM
lights up when your phone is out of the
home area.
CDMA: digital mode
displays the signal strength level with
the number of bars.
displays the battery charge level status
with the number of blocks.
indicates you have voicemail or text
messages.
indicates the vibration mode.
indicates silent mode (lamp mode).
CDMA
Preparation