User Manual

Ring Tone

This option allows you to select the required ringing tone. You

can choose among 20 different tones or melodies. Each time

you select a tone, it sounds for a few seconds.

Data/Fax

This option allows you to be alerted with a distinct ringing

tone when you are faxed or received a data through the phone

(network dependent). You can choose between 20 different

tones or melodies. Each time you select a tone, it is played for

a few seconds.

Key Beep Menu 3-2

This option allows you to adjust the tone volume that the

keypad generates when you press a key.

You can also use or key on the left side of the phone

to adjust key volume in the idle mode.

Alert Menu 3-3

Minute Beep

With this menu option set to ON, the phone sounds an alert

10 seconds before each elapsed minute to remind you of the

length of the current call.

Service Area

With this menu option set to ON, the phone beeps when you

exit service area or when you return to a service area.

Sounds

You can use the Sounds menu to customize various sound

settings, such as the:

• Ring volume, type, and tone

• Alert sounds

• Alarm

Ring Menu 3-1

Ring Volume

This option allows you to adjust the ringing volume to one of

nine levels. You can also turn the ringer off. Use or

key (or or key on the left side of the phone). The more

the bars, the louder the volume.

Note: During an incoming call, you can mute the ringer by

pressing key.

Ring Type

This option allows you to indicate how you are to be informed

of any incoming calls. The following options are available.

BELL: The phone rings using the ring tone selected via the

menu option.

LAMP: The backlight is switched on and the lamp blinks; the

phone neither rings nor vibrates.

VIBRATOR: The phone vibrates but does not ring.

VIB + BELL: The phone vibrates first, then rings.