Quick Reference Guide

WIRELESS BASICS PICTURE MESSAGING
CHANGING YOUR RINGERS AND TONES
■
Selecting a ringer
1.) In standby mode, press the left soft key Menu, then press , ,
2.) Use the navigation key to highlight a category (such as Calls), then press . A
pop-up menu appears in the display.
3.) Use the navigation key to highlight My Melody (if available) or Preloaded, then
press . A list of ringer types appears in the display.
Note: My Melody contains ring tones downloaded using Get It Now. An error
message appears if you haven’t downloaded melodies using this feature.
4.) Highlight the ringer type that you wish to use for the selected category. Each
ringer type plays as it is highlighted.
5.) Once the desired ringer type is highlighted, press . Your settings are saved.
■
Adjusting the ringer volume
1.) In standby mode, press the volume key on the left side of the phone up or down.
A graphic appears in the display indicating the current ringer volume.
2.) Press the volume key up or down to adjust the ringer volume to the
desired setting.
3.) Press (or wait a moment for the phone to return to standby mode). Your
settings are saved.
■
Setting the ringer to vibrate
1.) In standby mode, press the volume key on the left side of the phone up or down.
OK
OK
OK
OK
2 ABC3DEF9WXYZ
A graphic appears in the display indicating the current ringer volume.
2.) Press the down volume key until Vibrate appears in the display. Press (or
wait a moment for the phone to return to standby mode). The vibrate icon appears
in the upper part of the display, which indicates your phone will now vibrate for
incoming calls.
SETTING UP AND USING VOICE MAIL
■
First time user
1.) In standby mode, press and hold , or press , , , then press
. Your phone dials voice mail.
2.) Follow the voice tutorial to set up your account.
■
Existing user
1.) In standby mode, press and hold , or press , , , then press
. Your phone dials voice mail.
2.) Enter your password when prompted, then press
.
3.) Follow the recorded prompts to listen to messages, change administrative
options, and so on.
SNAP IT. SHARE IT
■
Snapping and sending a picture
(see note next page)
1.) In standby mode, press the camera button ( ).
2.) Using the display as your viewfinder, press to snap the picture. You’ll hear a
shutter sound and the picture that you snapped appears in the display.
OK
#
SEND
6MNO8 TUV
*
1 .-’
SEND
6MNO8 TUV
*
1 .-’
OK
▲
Page 7 Page 8
▲
▲
Verizon a610 QRG 8-20-03.qxd 03/9/16 9:26 AM Page 4