SCH-a630 Series A L L D I G I T A L M O B I L E P H O N E User Guide Please read this manual before operating your phone, and keep it for future reference. YF30.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Disclaimer of Warranties; Exclusion of Liability Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390. Printed in South Korea GH68-06535A RSA® is a registered Trademark RSA Security, Inc.
Table of Contents Section 1: Getting Started . . . . . . . . . . . . . . . . . . 9 Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . 11 Understanding this User Manual . . . . . . . . . . . . . . . . . . . 12 Section 2: Understanding Your Phone . . . . . . . 13 Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . Front Views of Your Phone . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Section 6: Understanding Your Contacts List . .59 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Opening Contacts menu . . . . . . . . . . . . . . . . . . . . . . . . . .60 Finding a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 Adding a New Contact Entry . . . . .
Section 9: Changing Your Settings . . . . . . . . . 109 110 110 114 119 120 Section 10: Health and Safety Information . . . 133 Health and Safety Information . . . . . . . . . . . . . . . . . . . . Consumer Information on Wireless Phones . . . . . . . . . . Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . Using Your Phone Near Other Electronic Devices . . . . . . Potentially Explosive Environments . . . . .
Table of Contents
Section 1: Getting Started Topics Covered • Activating Your Phone • Setting Up Your Voicemail • Understanding this User Manual Section 1: Getting Started 9 Section 1 This section allows you to start using your phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together.
Activating Your Phone Contact Verizon Wireless and follow their instructions for obtaining service. We suggest that you read this guide to fully understand the services your phone supports. Turn your phone on Section 1 1. Open the folder, then press and hold seconds. for two or more Note: As with any other radio-transmitting device, do not touch the antenna as it affects call quality and may cause the phone to operate at a higher power level than is necessary. 2.
Setting Up Your Voicemail Setting Up Your Voicemail Voicemail allows callers to leave voice messages, which can be retrieved any time. Note: Once your Voicemail account has been set up, you can use the Voice Mail folder (under the Message menu) to view details of voice messages in your voice mailbox. Voicemail Setup—New Customer Section 1 1. In standby mode, press and hold the key, enter , or dial your own mobile number to access Voicemail. 2.
Understanding this User Manual The chapters of this manual generally follow the same order as the menus and sub menus in your phone. A robust index for quick reference to most features begins on page 169. Section 1 Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on page 133. Notes and tips Throughout this guide are icons and text that are set apart from the rest.
Section 2: Understanding Your Phone Topics Covered • Features of Your Phone • Front View of Your Phone • Command Keys • Understanding the Display Screen • Battery This section outlines some key features of your phone. It also displays the screen and the icons that are displayed when the phone is in use.
Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks). Section 2 • High speed data (CDMA 2000 1x Technology) • Global Positioning (GPS) Technology • 128 x 160 pixel color Liquid Crystal display • PIM functions (Scheduler, To Do List, etc.
Front Views of Your Phone Front Views of Your Phone The following illustrations show the main elements of your phone: Earpiece Display Headset Jack Send key Navigation key Section 2 Left Soft key Volume keys Speaker key Right Soft key End key Clear key Voice Mail key Alphanumeric keys Silent Mode key Voice Command key Microphone Power/Accessory Connector Section 2: Understanding Your Phone 15
Headset Jack Volume keys Activity LEDs Command Keys Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the left soft key ( ) and the right soft key ( ). Section 2 Left soft key Some functions of the left soft key are as follows. Left Soft Key Function Menu Contacts Right Soft Key Function • When the left soft key function in the display is Menu, press the Menu (left) soft key ( ) to open the menu list.
Command Keys Right soft key Some functions of the right soft key are as follows. • When the right soft key function is Back, press the Back (right) soft key ( ) to return to the previous menu. • In standby mode, press the Contacts (right) soft key ( ) to open your Contacts list. Clear key The CLR key ( ) is used to erase or clear numbers, text, or symbols from the display. You can also use to return to a previous menu or to return to standby mode from any menu. 1.
End key 1. Press and hold the End key ( 2. Press and hold ) to turn on your phone. to turn off your phone. 3. Briefly press once to disconnect a call, to return to standby mode from any menu, or to cancel the last input. Send key The Send key ( ) is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. 1. Press once to answer calls. 2. Enter a number and briefly press to make a call. 3.
Understanding the Display Screen Understanding the Display Screen The top line of the display is reserved for icons that indicate network status, battery power, signal strength, and more. The following table lists some display icons and their descriptions. Display icons Signal strength: Always appears when your phone is on and indicates the current signal strength. More lines indicate a stronger signal. No service indicator: Your phone cannot find a signal because you’re outside a service area.
1X Protocol: Indicates your phone is using the 1X protocol. The 1X protocol is capable of high-speed data (3G). Note: 1X protocol is available only in the Verizon Wireless network. 2G Protocol: Indicates your phone is using the IS95-2G (Digital) protocol. The 2G protocol is not capable of high speed data. Vibrate mode: Your phone vibrates upon receiving a call. Battery strength: More black bars indicate a greater charge.
Understanding the Display Screen Speakerphone mode: The current active call can now be heard using the speaker at the rear of the phone. TTY/TDD mode: Teletypewriter (TTY)/ Telecommunication Device for the Deaf (TDD) interface is active. Connect TTY/TDD to headset connector on the left side of the phone. Dialogue boxes Dialogue boxes prompt for action, inform you of status, or warn of situations such as low memory. Dialogue boxes and their definitions are outlined below.
Battery Note: This phone comes packaged with a partially charged rechargeable standard Li-Ion battery and a Travel Adapter. Important: Although the phone can be used while the battery is charging, the battery must be fully charged before first use, otherwise you could damage the battery. 1. Insert the bottom end of the battery into the phone housing with the label side down. The gold contacts on the end of the battery should match up with those on the phone. 2.
Battery Use the Travel Adapter The Travel Adapter is a convenient, light-weight charger that rapidly charges your phone battery from any 120/ 220 VAC outlet. 1. Plug the large end of the Travel Adapter into a standard 120 or 220 VAC wall outlet. 2. Insert the smaller end of the Travel Adapter into the charger/ accessory connector at the bottom end of the phone. Your phone begins charging and the battery image appears in the display.
Section 2
Section 3: Call Functions Topics Covered • Making a Call • International Calls • Receiving a Call • Adjusting the Call Volume • Call Log • Phone Modes • Roaming • Voice Dialing This section provides explanations of how you can make or answer a call. It also includes descriptions of the features and functionality associated with making or answering a call.
Making a Call 1. With the phone on, open the folder and enter the number you wish to call using the keypad. 2. Press to place the call. Dialing emergency numbers You can dial any of the numbers 911, *911, or #911 to place an emergency call. Section 3 If you dial 911, *911, or #911 and press , your phone dials the emergency number 911, automatically.
International calls International calls Call another country from the U.S. 1. In standby mode, enter the three-digit exit code (011) for the United States. 2. Enter the country code for the country that you are calling. A complete list of country codes can be found at www.verizonwireless.com. 3. Enter the number that you wish to call, then press . Note: Puerto Rico and Canada are on the North American dialing plan.
Receiving a Call When you receive a call, the phone displays one of the following: • If the caller can be identified, the caller’s number (or name if it’s in your Contacts list) appears in the display. • If the caller can’t be identified, Call from unavailable #, Call from restricted #, or no number appears in the display. Your phone continues to notify you of the call until one of the following events occur: • You answer the call. Press to answer the call. • The calling party ends the call.
Adjusting the Call Volume Adjusting the Call Volume ■ In standby mode, repeatedly press the volume key ( ) up or down until the desired Calls Level (Silent, 1 Beep, Vibrate, Level 1-5, or Vib+Ring) appears in the display. The volume key is on the left side of phone, next to the SEND key ( ). Call Log Use Call Log to view Outgoing, Incoming, and Missed calls for your phone. You can also use Recent Calls to erase your call history and view Call Timers.
Recent Calls menu options While viewing recent calls, you have options such as saving recent call numbers to your Contacts list, sending messages to recent call numbers, and prepending (editing) numbers before saving. 1. In standby mode, press the Menu (left) soft key ( then press (Calls). ), 2. Press the corresponding number on the keypad to view call logs for the following call types: • • • for Outgoing for Incoming for Missed 3.
Call Log 7. Press to perform the highlighted function. 8. Follow the prompts as necessary to complete the function. Erase Call Logs Use Erase Logs to delete calls from any or all call logs. 1. In standby mode, press the Menu (left) soft key ( ), then press (Calls), and press (Erase Logs). 2. Use the navigation keys to highlight the call log type that you wish to delete, then press . You’re prompted to confirm the erasure. 3.
Call Timers Use the Call Timer sub menu to view various timers for calls made and received from your phone. You can also reset any of your call timers, with the exception of the Lifetime timer. Note: The Lifetime timer retains a log of all calls made since the purchase of your phone and cannot be reset. 1. In standby mode, press the Menu (left) soft key ( ), then press (Calls), (Call Timer). The following menu items appear in the display. • Last Call: View the duration of your last call.
Phone Modes Phone Modes Standby mode Standby is the state of the phone once it has found service and is idle. The phone goes into standby: • After you power the phone on. • When you press after a call. • Anytime you press while browsing your phone’s menus and sub menus. 1. While in standby mode, enter a phone number, then press to place a call. 2. Press to return to standby mode. Text entry mode Enter content using any of the four text entry modes. 1.
Silent mode Silence all tones and alerts normally made by the handset. In this mode, the handset vibrates instead of making sounds. Enter Silent mode ■ In standby mode, press and hold . Entering Silent Mode briefly appears in the display and your phone returns to standby mode. Exit silent mode ■ In standby mode, press and hold . Exit Silent Mode briefly appears in the display and your phone returns to standby mode.
Phone Modes Speaker Mode Speaker mode lets you conduct a call without holding the phone to your head. Speaker mode also lets you include other, nearby people in an active call. Enter Speaker Mode ■ While you are in a call, press and hold the Speaker key ( ). The “Attention! Speaker Phone On” message and the speaker on icon ( ) appear in the display. Note: You must be involved in an active call on your phone before you attempt to enter Speaker Mode.
Roaming What is Roaming You can roam (travel outside a designated coverage area) with your phone to other digital networks. The roaming icon appears in the display when roaming is active, and extra charges may apply when making or receiving a call. Note: Some features may be unavailable while roaming. Roaming also consumes additional power from the battery requiring more frequent charges. Roaming Options Roam Option sets roaming preferences if you move out of your home network.
Voice Dialing To change your Roaming option, follow these steps: 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Network), (Roam Option). 2. Use the navigation key to highlight your roam option preference, then press . Your settings are saved. Note: This feature is only available on the Verizon Wireless network. Voice Dialing The SCH-a630 phone includes voice recognition-based dialing technology. You can use your voice in a natural manner to dial up to 20 numbers.
3. Press to select the desired Voice Kit function. The following three sections describe each Voice Kit item in greater detail. Record Voice Dial lets you dial a number by saying the name or phrase that you’ve recorded for that number. Before you can use Voice Dial, you’ll need to record the names or phrases that you wish to use. The Voice Kit lets you record up to 20 names and phrases. Tips for recording Voice Tags • Record Voice Tag names or phrases in a quiet area.
Voice Dialing 4. Wait for the beep and then say the name or phrase again. The phone plays back the name or phrase, the Voice Dial screen appears in the display, and then the phone prompts, “Please enter the number with your keypad and press OK.” 5. Enter the phone number, then press prompted to enter the name. 6. Enter the name or phrase, then press saved. . You’re .
• Talk: Call the number for the voice tag entry. • Erase: Delete the voice tag for the entry. • Play All: Replay the voice tag entry. 5. Use the navigation key to highlight the desired option, press to perform the function for the highlighted option. Review a Voice Tag 1. In standby mode, press the Menu (left) soft key ( ), then press (Voice Kit). Record is highlighted. 2. Press (Review). The Voice Tag List of recorded names and phrases appears in the display. 3. Use the navigation key to highlight a name.
Voice Dialing 2. Press deletion. (Erase All). You’re prompted to confirm the 3. Use the Navigation keys to select Yes (to delete all Quick Dial names) or No (to return to the Voice Kit menu) and press . If you selected Yes, you’ll receive a confirmation message that all Voice Tag names were deleted. Set Active Use the Set Active menu item to select the method for Voice Kit activation. 1. In standby mode, press the Menu (left) soft key ( ), then press (Voice Kit). Record is highlighted. 2.
Section 3
Section 4: Menu Navigation Section 4 Topics Covered • Menu Navigation • Menu Outline This section explains the menu navigation for your phone. It also includes an outline of the available menus associated with your phone.
Section 4 Menu Navigation Access menus using the navigation key in tandem with the two soft keys ( ), or use a shortcut. 1. In standby mode press the Menu (left) soft key ( The first of several menus appear in the display. ). 2. Use the navigation keys to browse phone menus. 3. Press to enter the menu or sub menu presently appearing in the display. Return to the previous menu 1. Press the Back (right) soft key ( previous menu. ) to return to the 2.
Menu Navigation Navigation Key shortcuts The In-Use Option Access numerous menus and features even while in a call. Note: If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to standby mode. 1. While in a call, press the Menu (left) soft key ( ). The following In-Use menu items appear in the display. • Calls: Display your recent incoming, outgoing, and missed calls.
• Version: View the software and hardware version information for your phone. Section 4 2. If you press the Msg (right) soft key ( ) in while in a call, the following Messages menu items appear in the display: • • • • • • • Send New Msg Voice Mail Inbox Outbox Draft Msg Setting Erase Msg 3. Use the navigation key to highlight a menu. Press to open the highlighted menu or to activate the feature.
Menu Outline Menu Outline 1 Calls 1.1 1.2 1.3 1.4 1.5 2 Outgoing Incoming Missed Erase Logs 1.4.1 Outgoing 1.4.2 Incoming 1.4.3 Missed 1.4.4 All Calls Call Timer 1.5.1 Last Call 1.5.2 Total 1.5.3 LifeTime 1.5.4 Erase Total Contacts 2.1 2.2 Find Add 2.2.1 Number 2.2.2 E-Mail Section 4: Menu Navigation 47 Section 4 Use the menu shortcuts on the following pages to quickly access menus and sub menus.
Section 4 2.3 2.4 2.5 3 Rename Group My Phone# Memory Messages 3.1 3.2 3.3 3.4 3.5 3.6 Send New Msg Voice Mail Inbox Outbox Draft Msg Setting 3.6.1 Send Setting 3.6.1.1 3.6.1.2 3.6.1.3 3.6.1.4 3.6.1.5 SaveInOutbox Callback # Entry Mode Insert Sign. Delivery Ack 3.6.2 Msg. Alert 3.6.2.1 3.6.2.2 3.6.2.3 3.6.2.4 3.6.3 3.6.4 3.6.5 3.6.6 3.6.7 3.6.8 3.6.
Menu Outline 3.7 Planner 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 Section 4 4 Erase Msg 3.7.1 Voice 3.7.2 Inbox 3.7.3 Outbox 3.7.4 Draft 3.7.5 All Messages Today Scheduler Jump To Date To Do List Memo Pad Alarm Clock Count Down World Time Calculator Display 5.1 5.2 5.3 Animation 5.1.1 Opening 5.1.2 Closing 5.1.3 Wallpaper Banner Backlight 5.3.1 Lcd 5.3.2 Keypad 5.3.
Section 4 5.4 5.5 5.6 5.7 6 Sounds 6.1 6.2 6.3 6.4 6.5 6.6 50 Contrast Auto Hyphen Service LED Dialing Color Volume/Vibrate 6.1.1 Calls 6.1.2 Alarm Ringer Type 6.2.1 Calls 6.2.2 Alarm 6.2.3 Planner Key Beep 6.3.1 Volume 6.3.2 Tone Length Alerts 6.4.1 Minute Beep 6.4.2 Service 6.4.3 Connect 6.4.4 Disconnect 6.4.5 Fade 6.4.6 Roam 6.4.
Menu Outline 7 Voice Kit 8 Record Review Erase All Set Active Section 4 7.1 7.2 7.3 7.4 Setup 8.1 8.2 8.3 8.4 8.5 Location Network 8.2.1 Set NAM 8.2.2 Roam Option Security Others 8.4.1 Shortcut 8.4.2 Call Answer 8.4.3 Auto Retry 8.4.4 Language 8.4.5 Clock Set 8.4.
Section 4
Section 5: Entering Text Topics Covered • Changing the Text Entry Mode • Using T9 Mode • Entering Upper and Lower Case • Entering Symbols Section 5 • Entering Numbers This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes associated with entering text.
Changing the Text Entry Mode 1. While composing a message, press the Option (left) soft key ( ) to display a pop-up menu with the following options. • • • • ABC: Choose the method of text entry. Text Format: Choose the appearance of text entries. Add Media: Add a number from your Contacts list. Quick Text: Choose from up to 20 messages (11 are precomposed as factory defaults, but all 20 can be edited). Section 5 2. ABC is highlighted.
Entering Upper and Lower Case 4. ABC is highlighted. Use the left/right navigation key to display T9 Word, then press . Now, for practice, enter the word “Samsung” into your message by pressing each of the following keys only once: , S , A , M , S , U , N G Entering Upper and Lower Case • Enter characters while in ABC mode by pressing the key that contains the desired characters (such as for “h”). • Press the key repeatedly to cycle through other available characters for that key.
Entering Symbols Symbol mode enables you to enter symbols such as @ or % into a text message. 1. In standby mode, press the Menu (left) soft key ( ), then press (Messages), (Send New Msg) to compose a new text message. 2. Enter the phone number of the recipient, then press . 3. Press the Option (left) soft key ( ) to display a pop-up menu containing the following options. Section 5 • • • • ABC: Choose the method of text entry. Text Format: Choose the appearance of text entries.
Entering Numbers Entering Numbers Enter numbers into a text message while in number mode (123). See "Changing the Text Entry Mode" on page 54 for instructions on changing text entry modes. • While in 123 mode, press the key containing the number that you wish to insert into your message.
Section 5
Section 6: Understanding Your Contacts List Topics Covered • Contacts • Opening Contacts menu • Finding a Contact • Adding a New Contact Entry • Edit contact numbers • Edit an e-mail address • Adding Pauses • Contact Groups • Deleting a Contacts list Entry Section 6 • Saving numbers after a call • Saving numbers from the call log • Speed Dialing • Finding My Phone Number • Memory Information This section allows you to manage up to 500 daily contacts by storing their names and numbers in your Contact List.
Contacts Your Contacts can store up to 500 numbers, with each contact having up to five associated phone numbers, an email address, and a picture ID. Each phone number can be up to 32 digits in length, including hard pauses; and associated names can be up to 22 characters in length. The memory Location (also used as the Speed Dialing number) for each Contact can be automatically or manually specified.
Opening Contacts menu 2. Use the navigation key to highlight the Contacts sub menu of your choice, then press . Contact List Icons You can assign a host of entries to a Contact. The icons in the following table represent all available entry types Name. Enter the name for the contact in this field. Location. Indicates the memory location (which is also the speed call number) for the contact.
E-mail icon. Enter an e-mail address for the entry in this field. Group icon. Select the Group category for the contact in this field. Melody icon. Select a melody to associate with the contact in this field. Picture ID icon. Select the picture to associate with the contact in this field. Finding a Contact From standby mode, you can quickly open the Contacts list and view the Contact entries you’ve stored there. If you’ve stored a named entry in your Contacts, Find allows you to find it quickly. 1.
Finding a Contact Find by name 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the By Name method selected and the first name in the Contacts List highlighted. 2. Enter the first few characters of name you assigned to your contact. For example, if you saved the name as Amy Smith, begin the search by pressing . As you enter letters, the entry number and names of the closest matches appear in the display. 3.
Find by entry This option allows you to find a stored contact by Location number. 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the By Name method selected and the first name in the Contacts List highlighted. 2. Use the navigation keys to highlight the By Entry method. 3. Enter the Location number assigned to the contact, then use the navigation keys to highlight the contact you want. 4.
Finding a Contact Find by group This option allows you to find a stored entry in a related group. 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the By Name method selected and the first name in the Contacts List highlighted. 2. Use the navigation keys to highlight the By Group method. 3. Press the down navigation key briefly to highlight the group field. 4. Use the left and right navigation keys to display the group that you want.
9. Use the navigation keys to highlight an option, then press to select the option’s sub menu. Adding a New Contact Entry When you add information to your Contacts list, you can add it as a new entry or as an existing entry. Method 1 1. In standby mode, press the Menu (left) soft key ( ), then press (Contacts), (Add). The Option pop-up menu opens with Number highlighted, then press . 2. Enter a phone/pager/fax number for the new contact, then press .
Adding a New Contact Entry 002 and 500 (except 311 and 411 which are reserved for emergency calls, Location 001 is reserved for Voicemail) or by using the left and right navigation keys to select an available Location/speed dial number, if desired. 7. Use the up and down navigation keys to highlight other fields, if desired. Enter information using the keypad.
4. Enter a name for the entry using the keypad. Press the Option (left) soft key ( ) if you wish to select a different method of text entry, such as T9 Word, ABC, Symbol, or 123. 5. Use the navigation keys to highlight the Location (speed dial number) entry field. An initial Location/speed dial value is automatically assigned.
Edit an e-mail address Contacts List highlighted. 2. Use the navigation keys to display the search method that you want to use (By Name, By Group, or By Entry). 3. Enter information to find the entry, or use the navigation keys to highlight the contact containing the number that you want to edit. 4. Once the contact is highlighted, Option (left) soft key ( ). A pop-up menu displays. 5. Use the navigation key to highlight Edit, then press 6. Press . to backspace and delete numbers. 7.
4. Once the contact is highlighted, Option (left) soft key ( ). A pop-up menu displays. 5. Use the navigation keys to highlight Edit, then press . 6. Use the keypad to edit the e-mail address. To insert the @ symbol, press the Option (left) soft key ( ). 7. Use the navigation keys to select Symbol, and then press . 8. Press (@ symbol) and enter the remainder of the email address using the keypad. 9. Press the Option (left) soft key ( ). 10. Use the navigation key to highlight .
Adding Pauses Adding Pauses Calls to automated systems often require a password or account number. Instead of manually entering numbers each time, save the numbers to your Contact List along with special characters called pauses. • P pause: A hard pause stops the calling sequence until further input from you. • T pause: A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits. Note: Entering multiple two-second pauses extends the length of a pause.
5. When you’re finished entering numbers and pauses, press to store the number to your Contact List. Pause dial from the Contacts list 1. If you stored the number using (two-second) T pause(s), simply recall the number from the Contacts list. 2. If you stored the number using (hard) P pause(s), recall the number from the Contacts list and wait for the appropriate prompt from the number you are calling (credit card number, bank account number, and so on). 3. Press to dial the number.
Contact Groups Contact Groups You can place any Contact entry into one of five categories, called “Groups.” Groups allow you to search your Contacts list faster, quickly send messages to one or more group members, and more. Note: By default, new entries to your Contact List are placed into the Friend Group unless you select another group. View groups 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the first Contact in your Contacts List highlighted.
Move a contact to another group 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the first Contact in your Contacts List highlighted. 2. Use the up navigation key to highlight the By Name selection field option. 3. Use the right and left navigation keys to change the highlighted option to the By Group option. 4. Use the down navigation key to highlight the Friend selection field option. 5.
Contact Groups 11. Use the left and right navigation keys to select the destination group, then press . The entry is moved to the selected group. Rename a group You can rename any of the five groups. Note: Group names are limited to 12 characters. 1. In standby mode, press the Menu (left) soft key ( ), then press (Contacts), (Rename Group). Your existing group names appear in the display. 2. Use the up and down navigation keys to highlight the group that you wish to rename. 3.
Deleting a Contact Entry 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the first Contact in your Contacts List highlighted. 2. Use the navigation keys to display the search method that you wish to use (By Name, By Group, and so on). 3. Enter information to find the entry, or use the navigation key to highlight the entry that you wish to erase. 4. Once the entry is highlighted, press the Option (left) soft key ( ).
Saving numbers from the call log 3. Follow the on-screen prompts to select/enter other information, then press to save the new contact information. Saving numbers from the call log If you are unable to save a number when you end a call, you can save the phone number to the Contacts List later, from the call log. 1. In standby mode, press the Menu (left) soft key ( then press for Calls. ), 2.
Speed Dialing Note: 1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers stored in your Contacts list quicker. Speed dialing allows you to press and hold a key (or keys) to dial the number associated with those key(s). There are three types of speed dialing; 1-touch, 2-touch, and 3-touch dialing. Note: is reserved for Voicemail. 1-touch dialing Section 6 Call phone numbers assigned to memory locations 002 009 by pressing and holding the any of the 2 - 9 keys.
Speed Dialing Assign a speed dial location 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the first Contact in your Contacts List highlighted. 2. Use the navigation keys to display the search method that you wish to use (By Name, By Group, and so on). 3. Enter information to find the entry, or use the navigation key to highlight the entry that you wish to assign a new speed dial location. 4.
Assign speed dial type to an Contact If you have more than one number (or type, such as Mobile or Office) for a contact, you can select which number you wish to dial when speed dialing the contact. 1. In standby mode, press the Contacts (right) soft key ( ). The Find screen appears in the display with the first Contact in your Contacts List highlighted. 2. Use the navigation keys to display the search method that you wish to use (By Name, By Group, and so on). 3.
Memory Information Memory Information Memory Info displays the Used and Total memory for the Contacts List. ■ In standby mode, press the Menu (left) soft key ( ), then press (Contacts), (Memory). Memory information for your Contacts List (the number of contacts stored in it) appears in the display.
Section 6
Section 7: Messaging Topics Covered • Send TXT Messages • Receive TXT Messages • Message Folders This section allows you to send and receive text messages to compatible phones and other devices. If a text message exceeds 160 characters, it is broken up and delivered in separate messages, which will incur additional cost. Note: Available memory is shared between all messages. You can store up to 60 incoming and 60 outgoing messages. The exact number that you can store is dependent upon message length.
Send TXT Messages 1. In standby mode, press the Menu (left) soft key ( ), then press (Messages) and (Send New Msg) or In standby mode, press the left navigation key (Messages shortcut), then press (Send New Msg). The Send To screen appears in the display. 2. Enter the phone number of the message recipient, then press . 3. Enter the text for your message using the keypad. 4.
Send TXT Messages • Send Options: Choose the Priority, Validity, Privacy, whether you want to have a Delivery Acknowledgement, Insert a Signature or Call Back #, and whether you want to Defer Delivery of the message. See “Message send options” in the following section for more information on these settings. • Save In Draft: Save the message to your Draft folder. • Save Text: Save the text in your message as a quick text.
• Callback #--Yes/No/Edit--Insert a number into your message for the recipient to call you back. • Def. Delivery--Immediate/Set Time--Choose when you want your message to be sent. 3. Use the navigation keys to display the various Send Options for each menu item. 4. When the send option you want is highlighted, press to confirm the selection or to enter the option’s sub menu.
Receive TXT Messages Receive messages during a call When your phone receives a message during a call, New Message appears in the display along with the closed envelope icon ( ). You can view the message without disconnecting your call. 1. Press the Ignore (left) soft key ( ) to ignore the message. The message is saved to your inbox where you can view it later. 2. Press the View (right) soft key ( your call remains connected.
Message Folders Your messages are stored in any of four folders. These folders are discussed in more details in the following sections. Voice Mail folder Messages in your voice mailbox are logged in the Voice Mail folder of the Message menu. Open the Voice Mail folder to view the Callback # (if available) and other details of the Voicemail message. 1. In standby mode, press the Menu (left) soft key ( ), then press (Messages) and for Voice Mail.
Message Folders Inbox folder Received TXT messages are stored in the Inbox folder. 1. In standby mode, press the Menu (left) soft key ( then press (Messages) and for Inbox. Tip: Press the View (right) soft key ( message. ), ) while in a call to view a new 2. Use the navigation keys to highlight the message that you want to view. 3. Press to view contents of the highlighted message. 4.
Outbox folder Your phone stores TXT messages in the Outbox, regardless of whether the message was successfully transmitted. You can also verify if a message or e-mail was successfully transmitted, and at what date and time by enabling the Delivery Ack feature. See "Message send options" on page 85 for more information on delivery acknowledgements. Review messages in the Outbox 1. In standby mode, press the Menu (left) soft key ( ), then press (Messages) and for Outbox.
Message Folders Draft folder Draft messages have been composed but haven’t been sent yet. You can return to the Draft folder at any time to view, edit, or send a draft message. Create a draft txt message 1. In standby mode, press the Menu (left) soft key ( ), then press (Messages) and for Send New Msg. 2. Enter the phone number of the recipient, then press . 3. Compose your message using the keypad, then press . 4. Use the navigation keys to highlight Save in Draft, then press .
• Send Options: Select the priority, validity, privacy, delivery acknowledgement, signature, callback #, deferred delivery options. • Save In Draft: Continue to save the message to the Draft folder. • Save Text: Save only the text in the message, if media or other content is contained within the message. 5. Use the navigation keys to highlight the option you want, then press to select the option.
Message Folders • Voice Mail #: Edit your Voicemail number. 2. Use the navigation keys to highlight the message setting menu you want. 3. Press , then select and change the available settings. Erase message folder Use Erase Msg to erase all of the messages in a particular folder, or use the All Messages options to erase the contents of all your message folders at once. Note: Erase Msg erases all of the messages in the selected folder.
Section 7
Section 8: Planner Section 8 Topics Covered • Opening Planner • Today • Scheduler • Jump To Date • To Do List • Memo Pad • Alarm Clock • Count Down • World Time • Calculator The topics covered in this section allow you to schedule appointments, view the calendar, create To-Do lists, set an alarm, and perform simple math calculations.
Section 8 Opening Planner Planner is a suite of PIM (Personal Information Management) applications such as a Calendar, To Do List, and Memo Pad. Schedule events, set reminders, create to do lists, perform calculations, and more with the digital assistant functionality of this useful feature. 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner). The Planner menu opens and the applications listed in the following table appear in the display.
Today Today Add a new event 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and for Today. You’re prompted to enter a New Event, or the Event n/m screen appears in the display showing the information about any event already scheduled for the current day. 2. Enter details of the event using the keypad (Up to 32 characters). 3.
Section 8 5. When you’re finished entering details for the event, press . You’re prompted to enter the time and date for the event. 6. Enter the time and date for the event using the keypad. • Press • Press for A.M. when P is highlighted. for P.M. when A is highlighted. 7. When you’re finished entering the time and date, use the navigation keys to highlight the Notification field. 8.
Scheduler Scheduler View an event 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and for Scheduler. 2. A calendar appears in the display with the current date highlighted. The month and year also appear. 3. Use the navigation keys to move around within the calendar. 4. Press the volume up key to view previous months. 5. Press the volume down key to view future months. 6. Press to open a date that is highlighted. 7.
Section 8 Jump to date You can to go directly to any date that you specify in the Jump to Date entry screen. 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and for Jump To Date. The Jump To Date entry screen appears in the display with the current month highlighted. 2. Enter the desired Jump to date and press . The calendar month for the date that you specified appears in the display with the current date highlighted.
To do list 4. When you’re finished entering details for the task, press . You’re prompted to enter the priority for the task. 6. Use the down navigation key to highlight the Enter Date field. 7. Enter a time and date for the task using the keypad. • Press • Press 8. Press for A.M. when P is highlighted. for P.M. when A is highlighted. to save the task. Add, edit, or erase tasks 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and again for To Do List. 2.
Section 8 Memo pad You can create notes and store them in Memo Pad. You can’t prioritize or set an alert for stored notes. Return to Memo Pad anytime you want to review and edit your notes. 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and for Memo Pad. 2. If you have any stored memos, they appear as a list in the display. If this is your first time in Memo Pad, you’re prompted to add a new memo. 3. Enter a memo using the keypad. 4.
Alarm clock 3. Press to open a highlighted memo. • Add new: Add a new memo to Memo Pad. • Edit: Edit the memo currently highlighted or appearing in the display. • Erase: Erase the memo currently highlighted or appearing in the display. • Erase All: Erase all memos from Memo Pad. 5. Use the navigation keys to highlight the option you want. 6. Press to select the option. Alarm clock Your phone has an alarm clock that can be set to go off once, or daily at a specified time.
3. Enter the time for the alarm using the keypad. Section 8 • Press • Press for A.M. when P is highlighted. for P.M. when A is highlighted. 4. Press when you’re finished entering the time for the alarm. The alarm is set and the alarm icon ( ) appears in the display. When an alarm sounds An animated alarm clock appears in the display and an alert sounds when the specified time for the alarm arrives. • Press to silence the alarm.
Count down Count down 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and for Count Down. Note: If you have multiple count down timers, the event that is scheduled closest to the current date appears in the display. Use the navigation keys to browse timers. 2. Enter details for the Count Down event using the keypad. 3. Press the Option (left) soft key ( ) to display a pop-up menu containing the following text entry mode options: • • • • T9 Word ABC Symbol 123 4.
Section 8 Review, add, edit, and erase count down events Review scheduled Count Down events to determine how much time remains between the current time/date and any event that you’ve scheduled. You can also add another event, edit, or erase previously scheduled events. 1. In standby mode, press the left Menu (left) soft key ( ), then press (Planner) and for Count Down. 2. Any stored Count Down events appear in the display. The event scheduled closest to the current date appears first in the display.
World time World time 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and for World Time. A world map appears in the display. 2. Use the navigation keys to display the city and time that you want to view. The following cities are supported.
Section 8 Calculator You can perform calculations, including addition, subtraction, multiplication, and division using your phone. 1. In standby mode, press the Menu (left) soft key ( ), then press (Planner) and for Calculator. The Calculator appears in the display. 2. Enter the first number in your equation using the keypad (numbers can be up to nine digits long). Note: Press to enter a decimal point, or press for a number to a negative. to change the sign 3.
Section 9: Changing Your Settings Topics Covered • Time and Date Settings • Sound Settings • Display Settings • Voice Kit Settings Section 9 • Setup Settings This section explains the sound and phone settings for your phone. It includes display settings, security settings, folder settings, and extra settings associated with your phone.
Time and Date Settings Use the Clock Set menu to set the current date and time. Note: With digital service, the Clock Set menu is disabled. 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Others), and for Clock Set. Section 9 2. Enter the current time and date using your keypad. The month, day, hour, and minute must be entered with two digits. The year requires all four digits, and you must enter the hour in 24-hour format. 3. Press to save the time and date.
Sound Settings • Vibrate - Vibrates only, no sound. • Level 1-5 - Plays sound only at selected level without vibration. • Vib+Ring - Vibrates first, then plays sound. 4. Press to save the setting. Ringer type 1. In standby mode, press the Menu (left) soft key ( ), then press (Sounds), and for Ringer Type. The following ringer types appear in the display: • Calls • Alarm • Planner 2. Use the navigation key to highlight a ringer type, then press .
6. When the desired ringer type plays, press the setting. to save Key beep Use the Key Beep menu to adjust the tone volume that your keypad generates when you press a key. Key beep volume Section 9 1. In standby mode, press the Menu (left) soft key ( ), then press (Sounds) and for Key Beep. Volume is highlighted. 2. Press . 3. Use the volume keys or the navigation key to set the volume level for keypad tones. A tone sounds as you increase or decrease the volume setting. 4.
Sound Settings Alerts You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, as well as other options. 1. In standby mode, press the Menu (left) soft key ( then press (Sounds) and for Alerts. ), The following options appear in the display: 2. Use the navigation keys to highlight the sub menu you want, then press . 3. Use the left or right navigation key to activate (or deactivate) the selected alert, then press .
Power on/off Set your phone to play a sound whenever you turn it on or off. Section 9 1. In standby mode, press the Menu (left) soft key ( ), then press (Sounds) and for Power On/Off. The following options appear in the display: • Off • On 2. Use the navigation keys to highlight the option you want, then press . Roam ringer Set your phone to sound a unique tone when a call is received outside your home service area. This feature is set to Off by default. 1.
Display Settings • Banner: Create your own personalized greeting that appears in the display when your phone is in standby mode. • Backlight: Set backlight options for the LCD and keypad. • Contrast: Set the display contrast. • Auto Hyphen: With Auto Hyphen enabled, your phone automatically hyphenates phone numbers as they are entered. • Service LED: Turn the service LED on or off. • Dialing Color: Set the color(s) applied dialed numbers in the display. 3. Press to select the menu.
3. Use the navigation keys to highlight the menu you want, then press . The currently selected image appears in the display. 4. Use the navigation keys to highlight the image or wallpaper you want, then press to select it. Banner Section 9 Create your own personalized greeting that appears in the display while your phone is in standby mode. 1. In standby mode, press the Menu (left) soft key ( then press (Display) and for Banner. Note: Press and hold ), to erase an existing banner, if necessary. 2.
Display Settings • LCD: Sets the amount of time the backlight for the LCD remains on after a period of inactivity. Optional settings are 5, 10, and 15 seconds as well as Folder Open. • Keypad: Sets the amount of time the backlight for the keypad remains on after a period of inactivity. Optional settings are 5, 10, and 15 seconds as well as Folder Open. • Power save: Unless the backlight setting for the LCD has been changed, the backlight dims after a minute of inactivity, and then turns off.
2. Use the navigation keys to highlight the setting you want. 3. Press to select the setting. Service LED The Service LED, located near the antenna, serves the following functions: Section 9 • Flashes red to indicate an incoming call or message. • Lights briefly when you power the phone on. • Flashes red when the phone is in need of a charge. Turn the service LED off/on 1. In standby mode, press the Menu (left) soft key ( ), then press (Display) and for Service LED.
Voice Kit Settings 2. Use the navigation keys to highlight the desired option. 3. Press to select the desired option. Sample color numbers appear in the display. When you select the Monochrome or the Hyphenate option, a color menu also appears near the bottom of the display. Use the left and right navigation keys to select the desired color(s). For the Hyphenate option, press the Next (right) soft key ( ) to select succeeding groups of digits. ) to exit. Section 9 4.
Setup Settings Use the Setup menu to customize many of your phone’s options to suit your preferences. Using this menu, you can set or change security features, shortcuts, language, and more. Section 9 Location Location identifies your location to the network via GPS. You can fully enable this setting or set GPS (Global Positioning Service) to work only in the event that you dial 911. Note: Contact Verizon Wireless to determine if, when, or where locationbased services are available. 1.
Setup Settings 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup) and for Network. The following options appear in the display: • Set NAM: NAM1 is the default, your phone operates on the phone number assinged by your carrier. If you select NAM2, your phone operates on your second number, if assigned. • Roam Option: Set your phone’s roaming options to Home only, Automatic-A, or Automatic-B. 2. Use the navigation keys to highlight the sub menu you want, then press .
2. Press for Lock Phone. The following options appear in the display: • Never: The phone remains unlocked. • On power up: The phone locks automatically the next time your phone is powered on and stays locked until you enter the lock code. • Now: The phone locks immediately and stays locked until you enter the lock code. Section 9 3. Use the navigation keys to highlight the Lock Phone option you want. 4. Press to select the option.
Setup Settings Note: For security reasons, your phone does not allow you to view the lock code. If you change the lock code, be sure to write down or memorize the new code. Emergency numbers Your phone provides the option of storing three emergency numbers. Each number can be up to 32 digits in length. All emergency numbers can be dialed manually at any time, even when your phone is in locked or restricted mode.
Note: The default lock code is the last four digits of your mobile phone number. 2. Enter the lock code, then press 3. Press options. , , or for Emergency #. to select one of the three entry 4. Enter the emergency number (up to 32 digits in length). 5. Press to save the number that you entered. Section 9 Call Emergency Numbers in Lock Mode 1. In standby mode, enter the emergency number using your keypad. 2. Press to place the call.
Setup Settings 3. Use the navigation keys to highlight the Voice Privacy option you want, then press . Restriction Restriction allows you to restrict outgoing and incoming calls. You can also restrict access to your Contacts. 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup) and for Security. You’re prompted to enter the lock code. 2. Press for Restriction. The following options appear in the display: • Outgoing: When set to Yes, outgoing calls are restricted.
Erase memory Erase memory erases your Voice Kit recordings. This feature is useful if you want to give your phone to a friend or family member. 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup) and for Security. You’re prompted to enter the lock code. Section 9 Note: The default lock code is the last four digits of your mobile phone number. 2. Press for Erase Memory. A confirmation prompt appears in the display. 3. Use the navigation key to highlight Yes or No, then press .
Setup Settings 2. Press for Reset Phone. A prompt appears in the display asking if you want to restore default settings (except for the Contacts list). 3. Use the navigation key to highlight Yes or No, then press . Others The Others menu contains options for setting Call Answer mode, Language, and other settings. Shortcut 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Others), and for Shortcut.
Folder Setting (Call answer) You can select a specific method for answering incoming calls. Set your phone to any of the following options: • Send Key: Press to answer an incoming call. • Folder Open: Open the folder cover to answer an incoming call. • Any Key: Press any key except to answer an incoming call. Section 9 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Others), and for Call Answer.
Setup Settings 2. Use the navigation keys to highlight the setting you want, then press . Language The Language option lets your change the language used in voice prompts, menus, and key-input. 2. Use the navigation keys to highlight your language preference, then press . Clock Set Use the Clock Set option to set the current date and time. Note: In digital service mode, the Clock Set option is disabled. The network adjusts time and date automatically. 1.
3. Press to save the time and date and to return to the Setup menu. TDY/TDD Mode Your phone is fully Teletypewriter (TTY)/ Telecommunication Device for the Deaf (TDD) compatible. TTY/TDD equipment is connected to your phone through the headset connector on the left side of the phone. TTY/TDD must be enabled before you can use your phone with a TTY/TDD device. Section 9 1. In standby mode, press the Menu (left) soft key ( ), then press (Setup), (Others), and for TTY/TDD Mode.
Setup Settings Section 9 Section 9: Changing Your Settings 131
Section 9
Section 10: Health and Safety Information Topics Covered • Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone.
Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Section 10 Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/ sar. Consumer Information on Wireless Phones The U.S.
Consumer Information on Wireless Phones typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits. Do wireless phones pose a health hazard? What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices.
to repair, replace or recall the phones so that the hazard no longer exists.
Consumer Information on Wireless Phones comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.
Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures.
Consumer Information on Wireless Phones What is FDA doing to find out more about the possible health effects of wireless phone RF? FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone? If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.
Consumer Information on Wireless Phones Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects.
believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone.
Consumer Information on Wireless Phones voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000. FDA continues to monitor the use of wireless phones for possible interactions with other medical devices.
• Updated 4/3/2002: US Food and Drug Administration http://www.fda.gov/cellphones Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips: 1.
Road Safety 5. Do not take notes or look up phone numbers while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely. 6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. 7.
one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number. "The wireless industry reminds you to use your phone safely when driving." For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.
Using Your Phone Near Other Electronic Devices Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers: • should always keep the phone more than 15 cm (6 inches) from their pacemaker when the phone is switched on.
do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Switch your phone off in any facility where posted notices require you to do so.
Emergency Calls other area where you would normally be advised to turn off your vehicle engine. Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).
communication at the scene of an accident; do not cut off the call until given permission to do so. Restricting Children's access to your Phone Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill. FCC Notice and Cautions FCC Notice Section 10 The phone may cause TV or radio interference if used in close proximity to receiving equipment.
Other Important Safety Information Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it. Other Important Safety Information • Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. • Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
Product Performance Getting the Most Out of Your Signal Reception The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you're inside a building, being near a window may give you better reception.
Availability of Various Features/Ring Tones Maintaining Your Phone's Peak Performance For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty. There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. • Hold the phone with the antenna raised, fully-extended and over your shoulder. • Try not to hold, bend or twist the phone's antenna.
configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. Battery Precautions • Never use any charger or battery that is damaged in any way. • Use the battery only for its intended purpose. • If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.
Care and Maintenance • Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting. • Dispose of used batteries in accordance with local regulations.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. • Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. • Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation. • Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.
Section 11: Warranty Information Topics Covered • Standard Limited Warranty Section 11 Section 11: Warranty Information 159
Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
Standard Limited Warranty products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada.
replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG.
Standard Limited Warranty Section 11: Warranty Information 163 Section 11 NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
Section 11 LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/ PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY.
Standard Limited Warranty OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE. This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.
Intellectual Property Statement Section 11 All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating thereto (the "Phone System"), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Samsung Telecommunications America (STA), L.P. Samsung Telecommunications America (STA), L.P. Internet Address: http://www.samsungusa.com ©2005 Samsung Telecommunications America, L.P. Samsung is a registered trademark of Samsung Electronics America, Inc. and its related entities. Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099,204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
Section 11
Index Command Keys 16 Contact Groups move entries from/to 74 renaming 75 viewing 73 Numerics 1-touch dialing 78 1X protocol icon 20 2G protocol icon 20 2-touch dialing 78 3G protocol icon 20 3-touch dialing 78 A Adding a New Contacts List Entry 66 Alarm clock icon 20 Contacts List p pause & t pause 71 pause dial 72 store pauses 71 D Dialing one-touch 78 three-touch 78 two-touch 78 Dialogue boxes 21 Display B Backup to last menu 44 Battery charging 22 indicator 23 removing 22 strength icon 20 C pixe
Finding My Phone Number 80 L G Left soft key 16 Getting Started 9 M Activating Your Phone 10 Understanding this User Manual 12 Voicemail 11 GPS icons 20 Memory Information 81 Menu Navigation 43 H Hard pause 71 Health and Safety Information 133 I Icons battery strength 20 display 19 in use 19 signal strength 19 silent mode 20 use icon 19 In Indicator battery strength 20 new message 19 no service 19 roaming 19 signal strength 19 vibrate mode 20 International calls 27 Call another country from the U
Powering on 10 R Recent calls call timers 32 erase call logs 31 menu options 30 viewing 29 Recording tips, voice dial 38 Removing battery 22 Return to last menu 44 Review voice dial list 39, 40 Right soft key 17 Ringer off icon 20 Roaming Definition 36 Options 36 160 Standby mode 33 Store pauses 71 T Text entry mode 33 Tips 12 description 12 Travel Adapter 23 Turn your phone off 10 Turn your phone on 10 Two-second pause 71 U Understanding Your Contacts List 59 Deleting a Contact Entry 76 Edit an e-ma
tips 38 using 39 Voice Dialing 37 Voice Kit 37 Voice kit menu 37 using voice dial 39 voice setting 41 Voicemail listening to 11 Voicemail icon 19 W Warranty Information 159 172 Index
