User Guide

110
Section 9
Time and Date Settings
Use the Clock Set menu to set the current date and
time.
Note: With digital service, the Clock Set menu is disabled.
1. In standby mode, press the Menu (left) soft key ( ),
then press (Setup), (Others), and for
Clock Set.
2. Enter the current time and date using your keypad.
The month, day, hour, and minute must be entered with
two digits. The year requires all four digits, and you must
enter the hour in 24-hour format.
3. Press to save the time and date.
Sound Settings
The Sounds menu provides a variety of options to
customize audio properties for such things as ringers,
keypad tones, alerts, shut down sounds, and more.
Volume/Vibrate
1. In standby mode, press the Menu (left) soft key ( ),
then press (Sounds) and for Volume/Vibrate.
2. Use the navigation keys to highlight Calls or Alarm, then
press .
3. Use the up and down volume keys to select one of the
following volume levels or vibrate modes:
• Silent - No sound or vibration.
•
1 Beep - Plays a single beep without vibration.