User Manual
Table Of Contents
- Contents
- SCH-a690 closed view
- SCH-a690 open view
- Introduction
- Understand your phone
- Antenna
- Backlight features
- Clear key
- End key
- Headset connector
- LED indicator
- Right soft key
- Left soft key
- Push to Talk Key
- Microphone
- Speaker phone
- Speaker phone key
- Alpha-Numeric keypad
- Send key
- Navigation key
- Volume Key
- Get it now
- Your phone’s display
- Install the battery
- Remove the battery
- Charge the battery
- Battery indicator
- Low battery indicator
- Your phone’s modes
- Get Started
- Menus and sub menus
- Accessibility
- Calls
- Call features
- Push to Talk
- Push to Talk Login
- Push to Talk prompts during a conversation
- Create and Manage your Push to Talk Contact List online
- Access the Push to Talk Contact List from your device
- Initiate a one-to-one Push to Talk Call
- End a one-to-one Push to Talk call
- Initiate a one-to-many Push to Talk call
- Initiate a Push to Talk call with the flip closed
- Initiate a Push to Talk call from the Recent calls list
- Initiate a Push to Talk call from the menu
- Push to Talk dialing through the keypad
- Receive a one-to-one barge call
- Initiate a Push to Talk alert
- Receive a Push to Talk alert
- Push to Talk Silent Mode
- The Phone Book
- Tip: One-Touch, Two-Touch, and Three-Touch Dialing makes it easy to call phone numbers stored in your Phone Book.
- Open the Phone Book
- Find
- Add information to your Phone Book
- Rename group
- Edit Phone Book numbers
- Pauses
- Pause dial from the Phone Book
- Manual pause calling
- Erase individual phone book entries
- Edit an existing e-mail address
- Assign speed dial numbers
- Store numbers after a call
- Store numbers from call logs
- Shortcuts to storing phone numbers
- One-touch dialing
- Two-touch dialing
- Three-touch dialing
- Memory dialing
- My phone #
- Messages
- Message folders
- Mobile web
- Get It Now
- Planner
- Display
- Sounds
- Voice kit
- Setup
- Location
- Network
- Data
- Security
- Important! If you change the NAM1 setting you set the phone to lock on power-up and don’t program a number into NAM2, you won’t be able to access your phone. You must call the Service Center to unlock your phone.
- Important! Because of various transmission methods, network parameters, and user settings used to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calls may not be available at all times.
- Important! DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency numbers.
- Tip: Press and hold to erase all characters from the screen.
- Call Answer
- Auto Answer
- Auto Retry
- Language
- Clock Set
- Version
- Usage guidelines: All about performance and safety
- Limited Warranty
Voice kit 93
Voice kit
You can call up to twenty stored names simply by speaking
one of the names into the microphone.
Voice dial
Using the Voice Dialing feature requires that you first program
the phone to recognize the name of the person you
are calling.
Only one voice dial entry can be stored per name.
Tips on recording names
• Avoid recording similar names phonetically. If you record
a name similar to one already stored in voice memory,
the phone requests another name.
• Avoid recording in a noisy place.
• Speak clearly and naturally.
• Avoid very long or very short names. Names with two to
five syllables are recommended.
• If a voice entry does not properly connect, you may need
to record the name and number again.
Record
The phone provides voice prompts and screen displays to
guide you through the recording process.
1. In standby mode, press the left soft key
()
Menu, then
press
for
Voice kit.
2. Press
for
Voice Dial.
3. Press
for
Record. The phone will prompt you to say
the name you want to record.